Reviews
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
![[Xess] (RZ250 / 350) Filter Set for Fuel Cock](https://img.webike-cdn.net/catalogue/images/2902/3-y-t_00017a_TS.jpg)
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
In reserve.
I think it is good that the length is adjustable! View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
Essentials for old cars
Aluminum is a good material because it is resistant to heat and cracking, lightweight, compact, unobtrusive, and does not get in the way. The aluminum tanks are heat and crack resistant, lightweight, compact, unobtrusive, and unobtrusive, and they also free the carburetor from frequent clogging, which makes for a refreshing feeling of relief. View detail
Filtration capacity is unknown but to prevent Rust contamination.
[How is it used?
TZr250R (3XV) It is used for
Although 10mmSize Filters are hard to find, we chose this product from Brand, which is one of the most inexpensive and reliable.
Was the one you received as per Image?
It is larger than expected and takes up rather a lot of space.
L-shaped would have been better,...
Was the installation difficult?
It is simple to interrupt the Fuel line.
There is a direction, so you need to make sure that you do not make that mistake.
How was your experience with it?
I am not sure if the Filter is working properly, but so far I have not had any problems.
The transparent body allows you to check the internal condition of the product.
How did it compare to other products?
I've also used Daytona's Filter, but I'm not sure of the filtration capabilities of either!
It is safe to put it on an old car for now.
[Points to note]
Only the mounting orientation must be taken care of.
Also, be careful of the size, as it is quite large.
【Review】
I don't know about filtration capacity, but I guess it's better than nothing. I think it is.
10mm filters are not so common, and not many manufacturers offer them, but we were glad to find them in the lineup.
View detail
A Harley must have!
With the HarleyShovel Fuel Cock breakage and carburetor overflow, we decided to install this Fuel Filter.
The inside diameter of the hose was 7.9mm, so it took some force to insert it.
KIJIMA's Fuel Filter was previously installed on an XL1200C SPORTSTER 1200, so you can be assured of its quality.
I think this MODEL will MATCH Harley in particular.
Shake condition while driving due to severe Engine vibration.
Filter function is fine.
Since it is glass, the Hose was secured with Tie Wrap to prevent it from hitting the Cylinder.
I am satisfied with Large because it looks good.
View detail
Fits: HONDA STEED (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA STEEDVLX (STEED), HONDA STEEDVLX (STEED), HONDA STEED (STEED), HONDA STEEDVLS (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA CBR400R Limited Edition, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CB-1
As OEMFilter Compatible
Although there are no particular problems, the OEM parts were replaced along with the refresh of the fuel system hose, which has not been replaced since delivery. In addition, a small type magnet was installed.
OEM Parts are fitted with exactly the same geometry, so simply replace them as they are.
We used this component because it is an interchangeable part from a reliable Manufacturer and slightly cheaper than OEM.
Fuel filtration performance as it is a fairly Large-pattern Filter. (Inflow) seems to be high.
If you want something more compact, you can choose an Other Brand Product from DAYTONA or other manufacturers.
View detail
Can be visualized
I have had no problems without using Fuel Filter until now.
However, I saw someone I know wearing it and bought it to try it out because I could visualize the iron dust-like substance being removed.
Installation takes only a few minutes with no problems. I recommend it to anyone who cares to visualize it.
View detail
Prevention of Fuel Hose Bending
I think the main purpose is to Catch rust and Garbage with Filter, but I bought 90-degreesType to solve the bending of Hose.
A little more compact would be even better.
View detail
To prevent foreign objects from entering
[How is it used?
I used it on my TZr250R.
We do have rust removal on the Fuel Tank and of course the Cook has a Filter, but we use it as an insurance policy to prevent as much rust and Garbage from flowing away.
Was the one you received as per Image?
If you have a vehicle with limited space, it's a good idea to check the installation position beforehand.
How was your experience with it?
Hose inner diameter is φ8mm, so I cut off the tip part with Cutter and then installed it.
I've only run the engine a little bit since installation, but so far the flow rate seems fine.
I can't confirm the visible foreign body etc. at the moment, but it seems to catch it well.
[Points to note]
If you just look at the Body, you'll want to put it on backwards, but the orientation is as shown in the picture.
I don't think it's a problem because it's in the description, but you need to check the mounting direction.
How did it compare to other products?
This is my first time installing a Filter, so I don't know about other products, but it's good that it can be used for both φ6 and φ8m, so it can be used in any car model.
【Review】
You don't have to measure every Hose inner diameter, but you can be sure to buy this product.
It seems that only Gasoline flow rate may be a problem, so you need to be careful there.
View detail
A must have for old cars
This is a must have for old cars, I used it on my CRcarburetor. I used it on my CRcarburetor. It looks good and is transparent so you can see inside.
But once I put the Hose on and tried to take it off again, it broke ….
Well, it's a cheap Parts, so what can I do?
View detail
This is a normal product with no problems. Need to be replaced periodically
The discharge rate is not low and I have no problems using it.
When I did the rust removal of the Tank, I was worried and the net of Strainer of Fuel Cock had been removed. I thought this was Redn and installed it.
It's troublesome when Jet is clogged with a short Rust.
I think it needs to be replaced periodically, so it's like seeing how dirty it is.
View detail
for Replacement
I used to install disposable Type, but I bought this one because it looks good, I can reuse it, and it's easy to check the condition inside. It is easy to check the inside condition. I hope it will last for a while. View detail
I'm putting it on just in case.
It is installed on the Carburetor to prevent foreign matter from entering the Tank and clogging it. Since there was no particular problem until now, I repeated the same thing. This time, when I cleaned the carburetor, I replaced the fuel hose with a new one. I decided to replace the fuel hose with a new one because I don't want the gasoline to leak out while driving. Garbage has never accumulated in the Filter so far, but I'll use it just in case. View detail
04 Used for ST250E
With windmill, changed from Mesh.
No flow problem. carburetorNORMAL.
The other thing is durability.
I thought it would be cosy.
View detail
Switch from Filter Paper Type
We have an ELIMINATOR 250, Tank rusty. I've been using Filter for a long time as a symptomatic treatment because it produces a lot of rust powder. Until now, I have been using the filter paper type for its filtration performance. I liked the filter paper type because it can filter rust like dust, but it reduces gasoline flow a little.
However, when I was driving on the highway the other day, a strange symptom of lack of Gas occurred. When I checked the cause, I found it was clogged filter paper.
So this time I decided to close my eyes to the filtration performance and use Mesh Type. So far, rust powder is not flowing so that it becomes a problem, and I can see rust accumulating in the bottom of Filter's Case, and I am satisfied with the feeling that it is removed.
The best thing is that this disk-shaped design fits the gap of the intake manifold of ELIMINATOR 250. Probably, ParallelTWIN of the same system of ZZr, GPX and so on will fit as if they were measured.
Satisfied for now
View detail
exchange
I bought and installed a new one because it was dirty and I was unsure when I installed it. I don't know when it was installed, but it was dirty, so I bought a new one and installed it.
It's not expensive, and it seems to perform well.
View detail
Make the most of the small space.
I bought a Straight Filter, but I changed it to this one because the hose seemed to break due to its handling.
When I used it in an image to put in the part that seems to be broken, the handling of the Hose is no longer unreasonable.
However, the Filter section is not very reliable.
It's a good idea to have a with Magnet L-Type for 6?hose because the body can be a bit larger.
View detail