Reviews
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
The packaging is too messy.
The product itself looks good and well made, but the packaging is too messy. When I opened the box after receiving the product, the product was out of the Package.
The package was stopped at the four corners and at the stapler, so it was not popped out during shipping or anything like that.
I am concerned that there may be a defect as it seemed to be rolling around in the corrugated cardboard when it was given to me by the shipping company.
View detail
Improved handling
[How is it used?
I used to use DAYTONA's Filter, but I was concerned about the handling of the Hose, so I replaced it with this product.
We chose this product because it is 8mm compatible and L-shaped.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
The L-shape allows for more flexibility in the Fuel line.
I have not started using it yet and do not know if it is Catching the garbage, but the Filter is solid and seems to be working fine.
The transparency is better than DAYTONA's, so it is easier to check the internal condition.
[Points to note]
Note that there is a mounting orientation.
The body and package are clearly marked, so be sure to check them before installation.
How did it compare to other products?
As mentioned above, it was replaced from Daytona's Filter.
I don't know if there is a difference in the ability of the system to handle the same amount of power, but so far I am satisfied because I haven't had any jamming or overflow.
【Review】
It is an L-shaped Filter and relatively inexpensive.
I am satisfied so far, as it is easy to check the internal condition.
View detail
Size is exquisitely good
I have been using Fuel Fliter for a long time to avoid clogging and trouble in the carburetor due to foreign substances in the fuel. View detail
Cospar good
It is practical because you will not notice the Rust in the Tank going into the carburetor. View detail
ใช้งานดี ดูมีสไตล์ แล้วจาสั่งอีก View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
Essentials for old cars
Aluminum is a good material because it is resistant to heat and cracking, lightweight, compact, unobtrusive, and does not get in the way. The aluminum tanks are heat and crack resistant, lightweight, compact, unobtrusive, and unobtrusive, and they also free the carburetor from frequent clogging, which makes for a refreshing feeling of relief. View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
To old Motorcycle because the inside of the Tank is also old.
It's good for Carburetor Vehicles because you can see the Gasoline movement. View detail
Filtration capacity is unknown but to prevent Rust contamination.
[How is it used?
TZr250R (3XV) It is used for
Although 10mmSize Filters are hard to find, we chose this product from Brand, which is one of the most inexpensive and reliable.
Was the one you received as per Image?
It is larger than expected and takes up rather a lot of space.
L-shaped would have been better,...
Was the installation difficult?
It is simple to interrupt the Fuel line.
There is a direction, so you need to make sure that you do not make that mistake.
How was your experience with it?
I am not sure if the Filter is working properly, but so far I have not had any problems.
The transparent body allows you to check the internal condition of the product.
How did it compare to other products?
I've also used Daytona's Filter, but I'm not sure of the filtration capabilities of either!
It is safe to put it on an old car for now.
[Points to note]
Only the mounting orientation must be taken care of.
Also, be careful of the size, as it is quite large.
【Review】
I don't know about filtration capacity, but I guess it's better than nothing. I think it is.
10mm filters are not so common, and not many manufacturers offer them, but we were glad to find them in the lineup.
View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
Fuel fliter
I bought this because I frequently get Garbage in my carburetor and it clogs up frequently! 。
The installation was easy and the filtration was good.
View detail
Small Type
Small type as a fuel fliter, and since it is a paper base, it is the one that you should be most careful about in terms of narrowing down the flow rate.
However, because it is a Small Type, there are many cases that are convenient for placement.
View detail
Fuel Filter With Paper Filter
About quality and texture The product fits well with the internal diameter of 6mm hose About the feeling of use Gasoline is being delivered to the carburetor well Products to buy together 6mm hose Difficulty of installation easy, simple Cost performance and comparison with other products Among the fuel filters, the price and product were the best for me, and I was satisfied when I installed it About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing My ape100 is now an old bike, so foreign substances are starting to come out of the tank I saw small foreign substances while setting up the carburetor, so I installed them View detail
A Harley must have!
With the HarleyShovel Fuel Cock breakage and carburetor overflow, we decided to install this Fuel Filter.
The inside diameter of the hose was 7.9mm, so it took some force to insert it.
KIJIMA's Fuel Filter was previously installed on an XL1200C SPORTSTER 1200, so you can be assured of its quality.
I think this MODEL will MATCH Harley in particular.
Shake condition while driving due to severe Engine vibration.
Filter function is fine.
Since it is glass, the Hose was secured with Tie Wrap to prevent it from hitting the Cylinder.
I am satisfied with Large because it looks good.
View detail
OEM Product No. Due to Discontinuation
After warming up, start running and EngineStall.
The fire is not flying, so I replaced the CDI, but it does not hang Engine.
I did a fuel check and Gasoline was not coming.
I thought it was a fuel pump, so I replaced it.
When I re-button the Pump later, it catapulted.
When I saw the Filter when I was doing the Pump exchange.
Black with rust from Tank. perhaps a clogged Filter?
That's why I bought it. The middle one is the OEM Product that was replaced a year ago and has probably been without replacement for over 30 years (lol).
The one I used for the past year is not shown in the picture because I cleaned it and still use it since I didn't have any parts on hand (lol).
As you can see, it has the same shape as the OEM Product.
It is fastened with an elastic band, and the installation is secure.
OEM Product is probably discontinued, so thanks for the Large change.
By the way, a year ago, the fuel TubeQuantity:The Set also included a Filter, but it is already out of date.
I thought the rust on the tank was pretty much gone.
I had no idea it was still in Filter.
From now on, I'll be changing Filters regularly (laughs).
View detail
Fits: HONDA STEED (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA STEEDVLX (STEED), HONDA STEEDVLX (STEED), HONDA STEED (STEED), HONDA STEEDVLS (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA CBR400R Limited Edition, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CB-1
As OEMFilter Compatible
Although there are no particular problems, the OEM parts were replaced along with the refresh of the fuel system hose, which has not been replaced since delivery. In addition, a small type magnet was installed.
OEM Parts are fitted with exactly the same geometry, so simply replace them as they are.
We used this component because it is an interchangeable part from a reliable Manufacturer and slightly cheaper than OEM.
Fuel filtration performance as it is a fairly Large-pattern Filter. (Inflow) seems to be high.
If you want something more compact, you can choose an Other Brand Product from DAYTONA or other manufacturers.
View detail
To TMR-MJN.
The cheap Filter I put on at first was pulled at an angle and bent, so I replaced it with an L-shaped one made by KIJIMA. It is not bad looking. View detail