Reviews
Shorter levers
I still wonder till today why so many bike companies use the ugly, cheap looking levers in one colour only. Or no colour to be precise. Fortunately there are plenty of levers to choose from. I chose these shorter with adjustable position on both sides. They look great, the instalation was easish :) Brake is easy, clutch is a little tricky, but that applies fro any clutch where you need to fit the knob on the wire inside the lever. But anyone can do it with a little bit of patience. View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
I'm very happy with it
It is lightweight and I am satisfied with the color.
I can only tell the difference in feel from the OEM, but the smaller grip makes it easier to use.
On the other hand, I feel that it took a little time to get used to the Tight feel of the operation.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
It looks cool and is even easier to operate!
Clutch, Brake and Quantity:I appreciate the price for the Set.
Installation is easy and quick.
The texture is good and it is easy to dress-up.
The distance to Lever is shorter than OEM, making it easier to grip and operate.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Cool with good color
Easy to install, easy to grip and firm compared to OEMLever. The result is better than the price. View detail
Fits: SUZUKI DL1000 V-STROM250SX
Lever set
Satisfied with the quality, if the price was a little lower, very good! View detail
Fits: SUZUKI GSX1300R HAYABUSA GSX1300R HAYABUSA
Better value for money than other companies.
The price is a little lower than other companies' Levers. The quality of the lever is also good in Large size, and the range of adjustment is sufficient. If you are looking for a lever, U Kanaya is the place to go. View detail
Good looking!
I think the texture is good! There are many color combinations to choose from! I chose a relatively basic combination, but the Image I installed was a no-brainer.
Installation is very easy. I mistakenly tried to pull out the OEMLever collar-like part on the brake lever side, but that's it.
Although we have not yet run the bike, the position of both Brake and Clutch can be easily adjusted, and we would like to take into account the differences in positioning with winter and summer gloves.
I was satisfied with the fast shipping.
View detail
Fits: SUZUKI SV650X, SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650
New ModelU-kanaya is very good parenthesis
I was thinking of using a short lever to prevent interference with the bar end mirror, but I wondered if I could cross it with this New Model Middle. I bought it because I thought it would be possible to cross it with this New Model Middle. I have used U-kanaya's lever twice in the past and they were also good.
The OEM and Large size are different, so you might want to think twice before buying.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Quantity:Set and Save. Cospa Large!
I think this price is reasonable for the brake and clutch lever set.
There is also an installation instruction manual, so I was able to install it by myself, although it took some hang time.
I am satisfied with the look and Parenthesis.
My CB1300 (2023) had a problem with the Point to which the Clutch connects being very far away from the car since delivery. I changed to this Lever and it solved the problem.
Now I enjoy driving comfortably.
View detail
great. I recommend it
I ordered it to use for a katana in '23. I highly recommend it as it is very light and well made. The basic lever is black, but I ordered a silver color that matches the silver katana, and it matches well. If you use a katana, don't worry and order it. Thank you for the always fast delivery and good product^^ ----------------------------------------- ----------------- I ordered to use it in Katana in 23 years. It is very light and good, so we highly recommend it. The default lever is black, but I ordered it in a silver color that suits silver katana. If you are using it for Katana, don't worry. Thank you for always fast delivery and goodness ^^ View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
Good Parts!
I bought it for JigSar when it was not sold for VSTROM250SX properly now.
It is exactly the same, so I had no problem. (I just needed to wait a little longer...)
Ideally, I would like to have this Type and also a short lever or more corners, but I guess it is extravagant to hope for that much.
It was easy to use. I would like to see a functional beauty like OFFLever.
View detail
For zx4r
I bought this for my zx4r.
The item itself is from zx25r,
It fits perfectly with zx4r.
If anyone is wondering if it fits, it fits for zx25r.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but safely made in Japan
Easily installed on the Eliminator.
Of course, Size can also be Exactly ponned.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Operates and looks perfect.
[Mounting]
Both brake and clutch lever are hydraulic and can be easily installed without wires.
[Feeling of use]
It is easy to adjust the Lever distance compared to OEM. The grip is also smooth.
[Looks]
The color of the lever and adjustment parts can be customized, so it is easy to match the color to the car model.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Well made and satisfactory
I decided to buy it after I saw a friend of mine wearing it and was allowed to touch it. I like the fact that I can purchase each part individually in case of breakage.
It's still too cold to ride my motorcycle after replacing it, but I'm hoping that the operability has been improved.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R
Very easy to operate.
I felt that NORMAL was a little far away.
After replacement, we were able to adjust to the best position.
It became very easy to operate, and perhaps because of this, the Clutch operation feels lighter.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Satisfied with the look and feel of the operation.
23' Installed on CB1300SB SP.
First of all, as a Single Item texture, Matte feels just right. It was neither too smooth nor too textured, which contributed to the feeling of a high texture.
There was of course no dimensional gap in the assembly, and the unit could be easily assembled.
As for the operation feel, first of all, the adjuster has a moderately hard click feeling, and even if something bumps against it a little, it does not easily gap. I was able to operate it without any discomfort.
This time, we chose a sober black color choice because the body is flashy, but we felt that it would work well as the one point of color with many choices, and would stand out in a prominent position.
View detail
Second purchase after previous Motorcycle.
This is my second purchase.
I had decided to purchase Lever from Eukanaya.
I bought it again.
After installing it, it still looks
Parenthesis has improved very much and
The operability has also improved very much.
I will continue to ride Motorcycle
I'm so looking forward to it!
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
Gixxer 150 Replacement Procedure
The Brake Side is held in place only by a hex bolt, so it can be easily removed with an on-board Spanner and tools.
Daiso's Ratchet driver set (550 yen) is small in size, so it is more suitable for hard-to-reach places like this than a big ratchet set. It is good to have one!
I couldn't find any Grease, so I substituted Vaseline for now.
The Clutch Side is somewhat labor intensive, so if you think this is difficult, you should honestly have it attached at a store!
Clutch Side, loosen the Adjuster under the Tank, under the Hexagon Bolt, Yellow color→. Then loosen the top. When loosening the top, turn the longer hexagonal Red→ clockwise. Then the Wire will be loose.
Remove the Bolt on the Clutch Side, pull out the Lever, and remove the Wire Thailand.
For the Clutch Side, the Silver-colored Sleeve that was attached to the OriginalLever should be transplanted and then attached. At this time, please apply Grease to the Sleeve and Thailand Co.
If you put it back normally, there is no problem, but if you force it, you will bend the ClutchSensor, which is the resin sticking out from the Clutch holder side. It is a soft resin, so it will not break.
Fasten with a hex Bolt and retighten the Adjuster on the ? Then, tighten the adjuster and you are done. I could upload only 6 photos, so I omitted the finished drawing.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
All good.
The Gixxer 150 Lever has a poor reputation and is not a good fee ring, even if it is patronizing!
The Clutch Side, in particular, does not have an adjuster to reduce the number of parts, so it is difficult to make small adjustments.
Rather, from the grip, the pull, and the wobble, there is too much difference between the Original and the U-kanaya!
If you plan to drive it for more than a year, you'd better change it quickly.
Anyway, Parenthesis is great, Clutch operation is easier, and I can't say enough good things about it.
In addition, it is said that U-Kanaya's Engine Displacement Volume can be used on different motorcycles by replacing the attachment at the base if it is similar to the Engine Displacement Volume.
I ordered the Short Type on 08/31/2022 and it arrived on 9/4/2022.
Since there are up to six Up photos, I asked the customer to Google the installation itself, but I have included a photo that shows the shape of the unit.
I used Vaseline instead of Grease for Screw holes and drums, but I couldn't find it, so I will apply it properly when I can find it.
View detail