Reviews
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Lever is rounded for easy grip
Texture and finish are both very beautiful
Unlike other types, Touring type has a rounded lever for easy gripping.
Easy to adjust lever position
View detail
Shorter levers
I still wonder till today why so many bike companies use the ugly, cheap looking levers in one colour only. Or no colour to be precise. Fortunately there are plenty of levers to choose from. I chose these shorter with adjustable position on both sides. They look great, the instalation was easish :) Brake is easy, clutch is a little tricky, but that applies fro any clutch where you need to fit the knob on the wire inside the lever. But anyone can do it with a little bit of patience. View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
I'm very happy with it
It is lightweight and I am satisfied with the color.
I can only tell the difference in feel from the OEM, but the smaller grip makes it easier to use.
On the other hand, I feel that it took a little time to get used to the Tight feel of the operation.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
It looks cool and is even easier to operate!
Clutch, Brake and Quantity:I appreciate the price for the Set.
Installation is easy and quick.
The texture is good and it is easy to dress-up.
The distance to Lever is shorter than OEM, making it easier to grip and operate.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Cool with good color
Easy to install, easy to grip and firm compared to OEMLever. The result is better than the price. View detail
It's a shame because the quality is good.
The problem is on the Brake lever side, where the SensorSwitch that turns Cruise Control on and off is not pressed in enough to use Cruise Control. It is a pity because the quality is good. View detail
Fits: SUZUKI DL1000 V-STROM250SX
Lever set
Satisfied with the quality, if the price was a little lower, very good! View detail
Fits: SUZUKI GSX1300R HAYABUSA GSX1300R HAYABUSA
Better value for money than other companies.
The price is a little lower than other companies' Levers. The quality of the lever is also good in Large size, and the range of adjustment is sufficient. If you are looking for a lever, U Kanaya is the place to go. View detail
Good looking!
I think the texture is good! There are many color combinations to choose from! I chose a relatively basic combination, but the Image I installed was a no-brainer.
Installation is very easy. I mistakenly tried to pull out the OEMLever collar-like part on the brake lever side, but that's it.
Although we have not yet run the bike, the position of both Brake and Clutch can be easily adjusted, and we would like to take into account the differences in positioning with winter and summer gloves.
I was satisfied with the fast shipping.
View detail
Fits: SUZUKI SV650X, SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650
New ModelU-kanaya is very good parenthesis
I was thinking of using a short lever to prevent interference with the bar end mirror, but I wondered if I could cross it with this New Model Middle. I bought it because I thought it would be possible to cross it with this New Model Middle. I have used U-kanaya's lever twice in the past and they were also good.
The OEM and Large size are different, so you might want to think twice before buying.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
FoldableRType
The work is simple, but requires the preparation of tools.
As for the Lever position adjustment, in the case of my Motorcycle, Brake and Clutch each did not come to the same position even if they were aligned at the same stage.
Brake wanted it a little closer to the Handlebar side, but it was marginal, so I gave it 4 stars, but the quality was very good.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Quantity:Set and Save. Cospa Large!
I think this price is reasonable for the brake and clutch lever set.
There is also an installation instruction manual, so I was able to install it by myself, although it took some hang time.
I am satisfied with the look and Parenthesis.
My CB1300 (2023) had a problem with the Point to which the Clutch connects being very far away from the car since delivery. I changed to this Lever and it solved the problem.
Now I enjoy driving comfortably.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R
Customization
CustomizationU-KANAYALever installed as scheduled.
I was hesitant and decided to go with the short lever because the OEM lever on my CB250R does not have an adjuster and it is hard to reach my fingers. But I am worried about how my wife will feel when she rides it on touring in spring because she rides it too.
View detail
Z-H2-SE
There are only a few products that can be installed on the Z-H2-SE, so we purchased this product, which is compatible with the Z-H2-SE. The installation instruction manual was easy to understand. The product was beautifully processed, etc. View detail
great. I recommend it
I ordered it to use for a katana in '23. I highly recommend it as it is very light and well made. The basic lever is black, but I ordered a silver color that matches the silver katana, and it matches well. If you use a katana, don't worry and order it. Thank you for the always fast delivery and good product^^ ----------------------------------------- ----------------- I ordered to use it in Katana in 23 years. It is very light and good, so we highly recommend it. The default lever is black, but I ordered it in a silver color that suits silver katana. If you are using it for Katana, don't worry. Thank you for always fast delivery and goodness ^^ View detail
Fits: SUZUKI Gixxer SF250, SUZUKI Gixxer 250, SUZUKI Gixxer 150.
I still have no doubt.
The price is a little high, but I think it is well worth the price. I used to wear an Endurance Lever, but the fit was not good and I had to take it off immediately. This product feels comfortable in my hand and the operation is very good. View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
Good Parts!
I bought it for JigSar when it was not sold for VSTROM250SX properly now.
It is exactly the same, so I had no problem. (I just needed to wait a little longer...)
Ideally, I would like to have this Type and also a short lever or more corners, but I guess it is extravagant to hope for that much.
It was easy to use. I would like to see a functional beauty like OFFLever.
View detail
Did you design this properly?
The clutch lever side is problematic. First of all, when the lever is installed, the wobble at the root of the lever is bothersome, and this directly leads to a lack of control moderation, resulting in a large drop in usability from the OEM.
The cause may be that the root of the clutch lever is thinner than the OEM clutch holder. This leads directly to the lack of moderation in the operation, and the user does not feel secure.
To solve the problem, we need to fill the gap with something like a Large size thin washer, which will give us more surface area for mounting.
Next, if the clutch wire is not properly positioned on the drum and the lever distance is moved, the pull width of the wire will also change, and the grip width and pull width span will not match. If the lever is moved too close to the drum, the pull width of the wire will also change, making it impossible to match the grip width and pull width span.
It is probably just a review of the installation dimensions for the base product created by the Manufacturer, and the actual vehicle matching of the prototype and functional checks were omitted in CostCut, which is a Chinese design concept.
In conclusion, the 8S version is simply dress-up parts that are concerned with material and surface treatment, and may not be satisfactory for users who seek operability and functionality.
On the other hand, the brake lever side has a slight wobble after installation, and the modulation feeling is not particularly good, but it can be said to be at an unsatisfactory level. The same feeling of operation as OEM can be expected with the Dress-up effect.
If you like the look of the product and are considering installing it, we recommend that you check with a user who rides the same type of car before purchasing.
View detail
For zx4r
I bought this for my zx4r.
The item itself is from zx25r,
It fits perfectly with zx4r.
If anyone is wondering if it fits, it fits for zx25r.
View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but safely made in Japan
Easily installed on the Eliminator.
Of course, Size can also be Exactly ponned.
View detail