Reviews
Slightly longer short lever, detail workmanship is CP◎.
■About the sense of Size
This is a little bit more like the SPEEDRA (SSK) Lever, but this one is a little bit larger and the lever angle is more forward.
■Detailing
It is easy to use without Wobble. The adjustment Dial is somewhat rigid and less prone to misoperation.
■ Design
I don't know the OEM as it came with the car from the beginning when it was delivered, but the Red color is quite noticeable metallic red, although I guess people have their own preferences.
■Operability
I have large hands, so when I operate Clutch with two fingers, it is quite likely to hit my ring finger. However, if I move the lever far away in Dial, it is difficult to operate the lever, so I think this is an issue with the angle of the lever.
General Comment
I think the most attractive point of this product is its price. The cheap price does not mean that it is poorly made, so I think the cost performance is very good. However, I think that you should choose the right parts for your hands for this kind of operation system.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
You can easily ime-Chain!
This was my first non-OEM replacement for Lever and I was able to install it without difficulty
Brake levers are really pompous It takes only 3 minutes
Clutch is a bit fiddly with the Wire adjustment, but it's not difficult
A FingerTight is sufficient for adjustment Screw If you close it down, the Clutch meat position should be closer Try it
As others have said, the angle R is so tight that it may indeed hurt your fingers
I think most people ride with gloves, but you should consider the strain on your fingers
The grip feels like a Short lever and is a Small spooky Touch It looks and rides like a sporty image!
View detail
Overall good
Worn on New Year 16-year Grom. Is this something like Short lever. The six-step adjustment is good, but I changed it much, and when I think about the sharpness I felt that I was determined with a single positive.
I bought Silver, but it was nice as it was the OEM color. But the hole of the design and Red of the regulator are not so much...
Installation is simple. I hope it will be a little short...
There is no manual, but anyone can do without this.
View detail
CBR400R (NC47) Used in '13
Originally CBR 250R (MC41) However, OEMLever's ProductNo was the same as 400, so I thought that I could probably install it and purchased it.
I was able to attach it actually. However, the play went Large. I feel rattling up and down.
It is GOOD that HONDALOGO is included in the end part. However, in a grip portion certainly "CBR250R" As it is written, it may be good to shave there only w
If it's FashionCustom, I think this is fine, but if you want to get stingy performance it might be better for U-KANAYA.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
It purchased targeting the Makeover of appearance.Although it has equipped with the Clutch side satisfactorily, its Brake side was tight, and needed to delete and adjust it with the File in part.Since it became the Short lever, the feeling of ope
It purchased targeting the Makeover of appearance.Although it has equipped with the
Clutch side satisfactorily, its Brake side was tight, and needed to delete and adjust it with the File in part.Since it became the Short lever, the feeling of operation changed, but a Brake is good touch.I think that I will adjust to a slight degree since the
Clutch side is not coming exactly.
I think that important appearance matches since the Body color is red x black.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
They are goods which can be satisfied enough considering a price. If the structure of the Lever is known, it can attach easily.
They are goods which can be satisfied enough considering a price.
If the structure of the
Lever is known, it can attach easily.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
The goods themselves are firm structure, and if attachment also has appropriate degree of comprehension, it will be made simply. They are goods can be dramatically satisfied also with appearance of goods.
The goods themselves are firm structure, and if attachment also has appropriate degree of comprehension, it will be made simply.
They are goods can be dramatically satisfied also with
appearance of goods.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Attachment could also be simplified and it is satisfied also with appearance of attachment enough.
Attachment could also be simplified and it is satisfied also with appearance of attachment enough. View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Attachment was also able to be simplified. .. Since it says that removal of the pure Lever attached from the first is old, it has a close game. [ ] I think whether it can do, if there is even no it and is as long as 20 minutes.
Attachment was also able to be simplified.
.. Since it says that removal of the pure Lever attached from the first is old, it has a close game. [
]
I think whether it can do, if there is even no it and is as long as 20 minutes.
I think that it can be satisfied with this price of this quality enough.
It is that the BALI of the portion on which that was uniquely [
] regrettable hangs a finger remained.
Since it is a grade lightly correctable by a Paper, there is no problem well.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Since something was a cheap Lever [ やたら / as a Lever with an Adjust ], it purchases to a trial. Although felt like not matching well in character, it attached to the ZEPHYR750. The beam touch with and processing accuracy have attached easi
Since something was a cheap Lever [ やたら / as a Lever with an Adjust ], it purchases to a trial.
Although felt like not matching well in
character, it attached to the ZEPHYR750.
The beam touch with
and processing accuracy have attached easily so bad.
a motion of
Adjust part is also satisfactory, and since there is also thickness of a Lever so so, it is satisfactory at all on use -- it is .
A not much expensive Lever is a Lever which ... and those which it hesitates can recommend to you.
However, it is not necessarily large satisfaction.
Although it says that it is dissatisfied or is touch as this is regrettable, a METAL and a Bearing have no portion which becomes an axis first.
The Miniature Bearing is contained in case of an expensive Lever.
Although not expected, I wanted you to put in a true 鍮 METAL up to there, since it is a cheap Lever truly.
Next.
If it falls, it will be モゲ る from the Lever origin.
In order to usually avoid a Lever total loss in an emergency, the cut is contained so that it may become weak purposely in the direction of a tip, but there is no it.
I wanted you to put this in.
The 3rd is a color.
I all wanted black.
Although only the
Adjust lever is a red Anodized, does it float depending on the character of a Motorcycle?
Main Motorcycle was also putting in the Short lever, and since the Two Finger was established, both hands were that there is considerably nothing comfortable [ operation ].
Probably, they are inexpensive goods enough, if it is this quality in this price range.
Is it unsuitable for the direction which asks for
engine performance?
やっぱ.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
It is good shopping except a person with a disagreeable Short. Although there is shakiness a little [ ], at the time of operation, it is not worrisome. considering the price, buying it -- it is -- !.
It is good shopping except a person with a disagreeable Short.
Although there is shakiness a little [
], at the time of operation, it is not worrisome.
considering the
price, buying it -- it is -- !.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
It was used for XELVIS which I had ridden before. Although a product which was alike are also sold from the other company, a price is reasonable and it is good for a poor rider like me. It was perfect and good shopping.
It was used for XELVIS which I had ridden before. Although a product which was alike are also sold from the other company, a price is reasonable and it is good for a poor rider like me. It was perfect and good shopping. View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I feel an angle hits strongly and it is not good. When I grasp, it hits immediately the third finger and the little finger which are holding the grip, and it hurts. It seems that it does not suite the form of my hand somehow. Since texture is good, it is regrettable." View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
It attached to ZZR250 instantly. The relation Response and Position of the Clutch at the time of real run could also be set up finely, and I have satisfied them. You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I ha
It attached to ZZR250 instantly.
The relation Response and Position of the Clutch at the time of
real run could also be set up finely, and I have satisfied them.
You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I have also said the Design well to mind, doesn't the back become for a while?
pure [ like a Clutch / in brake operation ] in case of the present Reach -- because it is shorter, rather than former, grip will be needed and a Stress will be felt.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good to
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good touch. View detail