Reviews
Used for frando 7nb
[How is it used?
I used this service for frando 7nb.
Since the shape is identical to brembo, it could be used as is.
Was the one you received as per Image?
The color of Gold was a little strong, but it was not a problem.
Was the installation difficult?
A Pin to pull out the existing Knob was also included and was easy.
Need something to hit, such as Hammer
How was your experience with it?
Beta pin was loose and rattled a bit, so will replace it with a pin I have on hand.
[Included Parts:were they on?
Perfect with Pin to pull out included.
[Was there anything that disappointed you?
The rattles are a little bit large and might be a problem for some.
However, I am using it for frando 7nb, so maybe it is different when used for GALE SPEED or brembo.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
None in particular
View detail
Popular color scheme in MotoGP Spec!
What made you decide to buy?
The color scheme is popular in MotoGP and is used to dress-up brembo19RCS Master Cylinder.
[How was the installation?
Before removing the bremboRCSMaster Cylinder Pivot, remove the MASTERReverse side Pivot nut. Don't forget to do this because this is a large part! Then, remove the Pivot pin with a Hexagonal Wrench and replace it with an active Pivot pin so as not to drop the lever of the RCSMASTER. The length of the pivot pin was my biggest concern before purchasing, but I was relieved to find that it is the same length as the brembo.
[work reference …]
Before replacing the pivot pin, you should apply silicon-based grease to the active pivot pin! Because once the pivot pin is removed, one hand is used to keep the lever in place and the other hand is the only hand that can work on the lever. The Torque for the Pivot pin is 1.0Nm, and the Torque for the Pivot nut is 6.0Nm.
How was your experience with it?
It's almost a one point Attachment. (Lol) Self-satisfaction rises because of the most visible positioning, but …. (Lol)
Also, the Material is now Stainless Steel, so durability is better than OEM.
View detail
The color...
I had to buy a new brake lever because when I tipped it to the Right Side, the end of the lever was bent and when I bent it again, it broke as expected.
Unfortunately, the color of this Lever is so different between Clutch and Brake that I wondered if it was another company's product. The colors are so different that I'm not sure if it's another company's product or not.
I am satisfied with the feeling of using it. I bought the short lever at the same time and tried to use it, but since I hold the Axel with my thumb and index finger and the Brake with three fingers from my middle finger, if I hold it a little outside of the Handlebar, my Small finger will hit the ball. The long one was right for me.
If you have two fingers, index and middle, I think Short lever is no problem at all.
When I knocked it over, the Foldable didn't work very well and the tip of the Lever bent. I think this is due to the angle at which the tip hit the ground and other factors.
View detail
Hmm? Not good!
I used it for GALE SPEEDRM
It is fixed with βPin, but it is rattling What is this?
The inside diameter of the plug is too large!
It's a shame, because it looks good
View detail
Clutch has become easier to adjust
I have installed the Wire Clutch Holder Kit of GALE SPEED than before.
Where the custom parts were colored, we happened to discover this item and bought it.
【What made you decide the purchase?】
Although there was no problem with the adjustment on the Standard Dial of the Wire Clutch Holder Kit, we have customized various other parts as well, so I bought it with a feeling of saying I'm going to go to a fine place if I did anything.
【How was it actually used?】
Because the shape is caught easily on the fingers, it is easier to adjust than Standard's Dial.
For Dare to do with bare hands, there is no problem with Dial of Standard, but if you say that you are doing Gloves this Dial is easier to adjust.
【Mounting was difficult?】
It is easy installation just to insert and remove RPin. Radio pliers 1 pc Anytime anyone can exchange easily. I do not even have to ask PRO.
【Please tell me the installation point and hang】
It is good when pulling RPin out, but when you insert it, there is a possibility that you will hit the tip of the Radio pliers to the Clutch holder excessively, so those who do not have confidence have done curing with some material I think it's good. I pasted and laminated three sheets of plaster where I was going to Hit Gum Tape and cured it.
[Is there anything I was disappointed about?]
I thought that the price was a bit expensive, but I guess the Aluminum Cut-out is also good for finishing so it is reasonable.
【Hope for Manufacturer - Please let me know if you have any improvement points]
None.
【Have you compared items?】
Although it seems that it corresponds also to the Clutch holder of brembo, since there is only this Dial which arrives at the Clutch holder of GALE SPEED, the product which compared it is not Onza い ま す.
[Others]
I bought it as a Dress-up parts, but it was a pleasant miscalculation that I became familiar with the fingers and made it easier to adjust.
I did not want to make it very flashy so I selected Black's ones this time, I wonder if I could make it Gold at One Point. I get bored with the color of the current thing and I will try Repeat with Gold next.
View detail