Reviews
Simple and beautiful Forme!
I was looking for a simple and slimmer clutch lever, and I found this one.
I prefer a little more Short lever, but I like the feel.
It feels less thick and the excellent butchering makes it feel lighter.
View detail
good-looking
The OEM lever was not bad looking and we were going to use it as it was, but when we pulled it inside the handlebar to install the USB power supply, the bent part of the lever hit the switch box and the clutch could not be cut off. The interference with the switch box was reduced a little and it looks more luxurious, but I think the operation is heavier than the OEM one. View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
The grip width can now be fine-tuned.
It is a replacement from U-KANAYA lever as well as Brake lever.
I was able to adjust the grip to the best width after replacing it with STFLever, because it felt far away from my palm even after making the smallest adjustment with the previous Lever. At the same time, I replaced the Dust Boots of the Clutch Mask Cylinder because they were torn.
The feeling of use is closer to the Clutch connection when it is aligned with one's palm.
View detail
Fits: KAWASAKI ZX-4RR, KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI Z650RS
Rattling is Large size
It looks cool, but the rattling is LARGE and very annoying.
Also, the wire inserts are exposed and rain penetration is a concern.
It was disappointing for Z650RS.
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R1, YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA TRACER900
Yamaha is!
I purchased the YamahaOEM Product because it is not adjustable!
It is sometimes difficult to play in a traffic jam, etc., far away when the hand is small and normal.
The quality is perfect, but I don't like the engraving on the front.
View detail
Fits: HONDA CB400SF, HONDA MONKEY125, HONDA CB400SF, HONDA MONKEY125, HONDA CB400SB, HONDA CB500, HONDA CB400SB, HONDA GROM, HONDA CB125R, HONDA CBR250R, HONDA CB250F, HONDA CBR250R, HONDA CB250F
No worries about breakage
It is hard to break even if it falls over. Even if it breaks, spare parts are available at an affordable price. View detail
No worries about breakage
Even if it falls over and breaks, having a spare is a big relief. I think the price is reasonable. View detail
Really nice lever
I had to wait a couple months while this was built on order, but it was worth it. Just like the brake lever the build quality, fit & finish of the product are excellent. There are several colour options for the lever, main body & adjustment wheel if you want to match your bikes colours. Please ensure you apply a little grease to the main body upon installation as the fit is quite tight. Also be careful not to snap off the clutch switch (like I did) whilst installing. View detail
One point color adjuster is cool!
Model 3 GSX1300R HAYABUSA is an Adjustable type because it has a Hydraulic Clutch.
Please note that the product image is of Wire type Type and the Design is different. (I am glad that I was betrayed in a good way.)
The color of Dial is very cool with Accent color.
Not only is it easy to operate Adjuster, but it can be adjusted in detail,
We were able to find the BEST position for the hand.
Good purchase
View detail
perfect lever
It's perfect. The brake and clutch lever can be adjusted in advance, and the finish is also perfect, providing a smooth curved line and the air holes are drilled, which is expected to reduce resistance slightly. The foldable part is thought to be useful in the event of an accident. The color is also neat. do ------------------------------------------------- --------- It is perfect for brakes and clutch levers in advance, and the finish is also perfect, providing a soft curved line and a crooked air hole, which is expected to reduce the resistance slightly. do Powered by Google Translator View detail
The Handlebar area will look luxurious!
The one point logo looks cool. View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
Very good clutch horn
After the 21st model, there is a small switch at the position of the cb1300 clutch horn. I marked it on the picture. Due to my personal mistake, I bought the wrong model. I bought it, so there is no metal object at this position of the clutch to activate and close this switch. I consulted Honda. The switch of the maintenance personnel is a gear protector. Although it has no effect, I think it should still be necessary to buy later models. There is no problem with the rest. If you want to buy a friend, please be sure to check the year of the vehicle ----------- ----------------------------------------------- After 21 models , the position of the CB1300 clutch horn has a small switch picture. I have marked the wrong model because my personal mistakes bought it. I bought this position without a metal object. Although the maintenance staff is a gear protector, although there is no effect , I think there should be a model after buying a model. There are no problems if you want to buy it. If you want to buy, please see clearly Powered by Google Translator View detail
Attached W
The OEM is too small, so I'm replacing it. View detail
Fits: SUZUKI GSX-S750, SUZUKI SV650 ABS, SUZUKI SV650X ABS
Grip is OK.
Even if you want the grip comfort of an OEMLever, you can probably go for it! (I'm an OEM guy myself)
The lever shape does not seem to differ much from the OEM lever.
It would be best if it had an adjustment mechanism like Brake Side.
There was no setting for Clutch Side.
View detail
Fits: YAMAHA MT-09, YAMAHA YZF-R1M, YAMAHA YZF-R6, HONDA CBR1000RR, HONDA CBR600RR, HONDA HORNET600, YAMAHA FZ-6N, YAMAHA FZ6-S FAZER, YAMAHA FZ-8, YAMAHA FZ-8 FAZER8, YAMAHA MT-07, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, HONDA CBR600RR, HONDA CBR1000RR
Clutch lever
Clutch lever, the picture and the Cinnamo's are different. View detail
Quantity:Purchase with Set
Brake lever and Quantity:I bought it as a set
We are satisfied with the adjustability of the system.
In particular, I expect that the Foldable will be effective in avoiding lever damage in the event of a fall.
View detail
Fits: HONDA CB1300SF SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB SP
If you are dissatisfied with OEM, RECOMMENDATION!
Even though it is a Small component, BilletAnodized looks much tighter.
I can make fine adjustments and the Lever shape is very good.
Clutch operation is now easier.
Also, the feeling of gripping the device has become lighter, perhaps due to the lever ratio.
For those who feel uncomfortable with OEM, this is a recommendation.
View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
CB1100rs
It's a very high quality product. It would be the best lever for CB1100rs. I really like it~!!^^ It is fitted just as well as the genuine lever. View detail
STFClutch lever replacement
The texture and feel are both excellent.
Since the position of the Grip and Lever is adjusted by Screw, I thought there was not much room for adjustment.
We were able to get pretty close to Grip.
As for cost performance, I am satisfied with the clutch lever, but the brake lever is expensive.
Minus and I think:。。。。。
In case you are wondering, even I, an amateur, was able to install it without any problems.
View detail
It doesn't stick…
The ActiveHP says it fits the 2022 XSR900, but in reality, it cannot be installed without machining. 2022 XSR900User, please be careful. The photo shows the machining done by a Motorcycle shop that has a milling machine. View detail