Reviews
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
It's crisp and clean.
This is a change from OEM.
The installation can be done without too much difficulty if you have experience in such work as replacing the clutch lever, since there is a translation (please enter hereManual).
Also, while installing it, I felt that the accuracy of the cutting process may vary a bit, and you may be dissatisfied with the Quick Adjuster for Red and Blue. The color will deteriorate under ultraviolet light while in use, and the color will fade, but if you are considering purchasing these as Custom, please be aware of this.
Grease is also applied to the bolt that fixes the lever from the beginning, and the handlebar is fixed with a clamp system, and the screw is very precise, so it was installed comfortably.
The clamp that fixes the handlebar is a little hard plastic material, so there is a possibility that the entire clamp may rotate when it falls over. If you are concerned about it, you may want to change to RubberMaterial.
As for the feel of the operation, as per the Title, it is snappy and sharp.
If you want a direct feel from it, I think you can further modify the Sleeve in the Thailandico fixation area.
Even with the Sleeve position in its normal state, the OEMLever comparison is better, so I felt that the Point is a point of preference depending on how a person uses Clutch.
I wish I had not been stingy and purchased it earlier, as it is one of the other Items that can be fine-tuned for Lever position.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
It is easy to use
Brake Easy to grip and use as well as lever
It looks cool and perfect!
There was no XJR400R setup, so I replaced it with an FZ1N Bracket.
I changed the adjuster from M10 to M8 with Recoil.
A dress-up adjuster is attached.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Clutch lever replaced at the same time as the brake
Like the brake lever, the clutch lever was replaced with a ZETA PivotLever.
This is also my favorite Lever as I have used it on my KLX230R and have tipped it over many times, but the Lever has never broken, and it feels better to operate than the OEM.
After the lever is replaced, the clutch cannot be cut without adjusting the play of the wire, but this can be easily adjusted since it is a wire type.
I prefer 3Finger, but CRF250L has a light clutch lever, so even 3Finger lever can operate the clutch easily.
View detail
Fits: HONDA CB1100, HONDA CBR1000RR, HONDA X4, HONDA VFR1200F, HONDA VFR800, HONDA VTR1000FVTR1000F FIRESTORM, HONDA CB1000R, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1000 SF (Big One), HONDA CB1300SUPERTouring, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
easy to grasp
[How is it used?
I got a VTR1000SP2 from an acquaintance that had been neglected for a long time, and the lever was not OEM, but a cheap type of machined type that looked a little weird when you held it.
I don't like it, it's on Short and I don't like the way it feels against my finger. If I liked it that way, the OEM lever would be that way, and motoGP has that on theirs. So I thought about going back to OEM, but since I usually play off-road, I chose ZETA.
I chose it because it is not a so-called dress-up shape.
Our VTR1000SP2 is not in the list of compatible models, but I checked the compatibility of other Manufacturer's products and bought it thinking it would be the same. I think it would be good to add compatibility, but since they are unpopular, they won't be added.
Was the one you received as per Image?
The quality of ZETA's sharpening has improved over the years. In the past, the anodized surface would fly off and peel in seconds, but now it is Large and durable.
How was your experience with it?
It is easy to grip and the adjustment mechanism is fine-tuned.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are a gutsy person who wants to use Remote adjuster, you can buy Flight lever on a top ranking.
View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Unbreakable Lever
I installed it on my gasgas EC250 which I always use for forest road touring.
With the NORMAL Lever, the supplemental grip was not comfortable, so I purchased this Lever.
As a result, the grip is improved and Lever is easier to operate.
It is also foldable, which makes it difficult for the lever to break, and reduces the number of problems when touring on forest roads.
The quality is very good and Parenthesis good Lever.
However, the price is very high, so the cosmetics are not very good.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail
Good finish and feel
I used to use a flight lever on my 10R, but it has no adjustment mechanism and tires me out after long distances.
So we introduced this product, which has a ratio change and adjustment mechanism.
The exterior is beautifully machined and finished, the design is pleasing, the bolts are all titanium, and there are hollow holes for cutting and wiring, and the pivot bearings are bearing and smooth.
The installation itself on the handlebar is easy, but it is necessary to cut the SwitchWiring and process the terminals.
When I measured the weight of the flight lever with a Spring scale, it was about 8.4 kg, and when I measured it with a ratio that emphasizes lightness, it was about 7.8 kg, and I hardly felt any change.
The distance adjustment is difficult to operate because the Screw is close to the Small play Dial, so I am not inclined to change it easily.
Set about halfway between the furthest and most recent Lever, the semi-clear range seemed a little wide, but not uncomfortably so.
The play adjustment was also click-adjustable in the OEM, but this product is light and one click is large, and the sleeves are long, so when attaching and detaching the cable, you have to pull with all your might to get it off.
The price is about half of the 50,000 yen price of other companies' products, and it is not cheap.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA V-MAX 1680, YAMAHA MT-01, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 S 97-14, KAWASAKI ZRX1200 R 97-14, KAWASAKI ZRX1100 S 97-14, KAWASAKI ZrX1200DAEG , YAMAHA XT1200ZE XTZ750 SUPERTENERE, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Replace with Brake lever
Along with the brake lever replacement, the clutch lever was also replaced.
As with the Brake lever, we are pleased with the fine-tuning capability and the texture.
I would have also appreciated a lower price.
Basically, I am satisfied.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
A standard product that does not break and is easy to grip
I have been using Lever for a long time.
The product's ability to expand large in the opposite direction, which is a selling point of this product, makes it less prone to breakage, but it also has a different bend at the point where the fingers are applied compared to the OEM Product, making it more angular.
In the OEM model, the entire area where the finger rests on the Grip is covered with R, which makes the finger position unstable and leads to a difficult and fatiguing grip.
The 4-finger design also reduces the amount of force required, making it easier to respond to various situations, and I think this product will make you feel that you are able to ride better.
Compared to the OEM, it opens slightly outward due to the mounting point, but by closing the screws on the inside, it can be brought slightly inward from the OEM position.
There is no outward curvature from the middle, so if it is just the gripping area, the termination is inward from the OEM.
The installation can be replaced without any modification for the common Screws, and the Cover can be installed without modification as well.
Comparison images are attached for your reference for purchase.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R HiGrade, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14, Others
I'm satisfied
I decided to use ZETA's Clutch and Brake on road as well, because I was happy with the usability of them in off-road.
Installation is easy
View detail
The grip will be lighter and the appearance and parenthesis will be better.
[How is it used?
It was installed from the beginning on a WR250R that I bought used before the price skyrocketed as much as it does now.
To a friend. These are very expensive parts. I checked Webike's product introduction column and found that it was expensive enough that I wondered if I would want to buy it myself. I was lucky that it was exchanged from the beginning.
Did you receive the item as per the Image?
The product was exactly as shown in the image in the product description section, with a high quality, and was exactly as shown in the Image.
Was it difficult to install?
Since the entire clutch holder is replaced with the OEM Product, the clutch wire is removed from the base of the lever and the bolt quantity is added to the handlebar.:If you can remove the OEM clutch holder, which is fixed with 2pcs, you can install it without any problem.
How did you like it?
The grip is noticeably lighter than my friend's Normal clutch.
Moreover, it is very easy to handle because you do not feel much discomfort even with the Clutch meatPoint, and your left hand does not get lazy even if you are performing difficult attacks in the mountains for a long time, so it is a product that is very appreciated by middle-aged people whose physical strength is beginning to decline.
Was "Included Parts:" attached?
Clutch holderBody with peripheral parts such as Knob for adjustment and each Rubber cover in quantity:It is a luxurious product that is set.
Were there any disappointments?
Material attached next to the adjustment Knob:I don't know if this is an individual problem or not, but it is troubling that a part that is basically stored in Garage and not exposed to UV rays when not being ridden can break off so quickly.
There is nothing wrong with the functionality, but it is a little disappointing because the rest of the product is of high quality.
Other items that would be helpful
Point and hang of installation
Since an Instruction Manual is included in the package, it is a good idea to follow the installation instructions in the Instruction Manual.
After firmly attaching it, use the grip adjustment knob to adjust the lever opening to the length of your fingers.
As with OEMLever, make sure to grease up the moving parts.
[Availability and clarity of the Instruction Manual
It is a very easy-to-understand product that comes with an illustrated Instruction Manual.
[Notes]
The speed of deterioration of Rubbers.
[ITEMS TO BUY TOGETHER
If your OEM product is a motorcycle with an integrated clutch and mirror holder, you will need to purchase a separate mirror holder.
Check the clutch holder of the vehicle to be installed carefully, and if necessary, purchase it together with this product.
[Opinions and requests to Manufacturer
Although it is a bit expensive, I believe the product is worth the price, and I hope you will continue to sell it as long as possible.
View detail
Fits: SUZUKI DRZ400R, SUZUKI RM250, SUZUKI RMX250S, SUZUKI RMX250R, SUZUKI RM125, KAWASAKI KDX125SR, KAWASAKI KDX250SR, SUZUKI RM85, KAWASAKI KDX125, KAWASAKI KDX250, YAMAHA TW225, KAWASAKI KLX250, KAWASAKI KDX125-250, YAMAHA TW200, YAMAHA XTZ125, YAMAHA TRICKER, YAMAHA DT230LANZA, YAMAHA XT250X, YAMAHA TT250R, YAMAHA TT250R RAID
Brake lever and Quantity:Exchange in Set
Brake lever and Quantity:I replaced it with a set
1-Quantity:It is easier to bring it to the front because it is less likely to pinch the fingers when gripping with 2pc fingers.
The Brake Side is the same, but the Black Rubber Cover on the Lever has to be cut to fit. At first, I removed them, but then I began to worry about dust getting into them, so I cut them off little by little and tried to leave as much as possible. I was able to leave enough of the sliding part to cover it. Originally, I had partially cut off the cover when I installed Y's Gear's Handlebar Guard, so I did not have any resistance, but I think some people may be concerned about it.
View detail
Fits: SUZUKI SV1000S, SUZUKI SV1000, SUZUKI TL1000R, SUZUKI GSX1400, SUZUKI GSX-R1000, SUZUKI GS1200SS, SUZUKI BANDIT1250F, SUZUKI BANDIT1250S, SUZUKI BANDIT1250, SUZUKI BANDIT1200F, SUZUKI BANDIT1200, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM1000
good suzuko tune
My car is Suzuki. It's Hayabusa My fingers hurt because of frequent clutch manipulation because my hands were small After switching to zeta lever, these symptoms disappeared View detail
![[Replacement] Pivot Lever CP /Clutch 3-finger Lever Arm](https://img.webike-cdn.net/catalogue/images/29769/ze42_31001_b_TS.jpg)
For color change
Buy an optional product at a low price to change from silver lever to black The quality of Zeta products is so satisfying for the price View detail
Clutch becomes lighter.
Introduced because the clutch lever is not adjustable.
Note that Clutch switch requires Cancellation.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
Clutch operation made easy.
It's subjective, but it's lighter to operate, and my fingers don't hurt as much as they did with Kanaya's. View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Quantity:Pair (for Left and Right) Not exactly symmetrical.
It will be much shorter when installed.
Clutch may prefer 4Finger.
View detail
ZETA Zita Pivot Lever FP Clutch
ZETA Zita Pivot Lever FP Clutch is satisfactory in terms of increased operability and reduced damage in the event of a fall. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA V-MAX 1680, YAMAHA MT-01, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 S 97-14, KAWASAKI ZRX1200 R 97-14, KAWASAKI ZRX1100 S 97-14, KAWASAKI ZrX1200DAEG , YAMAHA XT1200ZE XTZ750 SUPERTENERE, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Clutch is now easier to connect.
The clutch lever was also replaced along with the brake lever.
The Clutch felt far away, but after adjustment, it is now slightly closer and easier to operate.
Installation was easy, and the Brake and Clutch together could be replaced in 15 minutes.
Even if you should fall down, you can increase your chances of getting home on your own, since the Lever is a Spec. that collapses in the middle of the road.
View detail