Reviews
Fits: Others (Φ22.2)
I'm having trouble getting all the LeftHandlebarParts.
I bought the same one three years ago, but the shape had changed from what it is now.
It looks amazingly similar to the 2-stroke KSR Clutch holder.
Personally, I preferred the previous one.
View detail
Fits: Others (Φ22.2)
Inexpensive, thank goodness! But the construction is …
I used it to bring the rear brake of the SUPER CUB to the LeftHandlebar side. webile only stocks the Long leverType, but KITACO sells the Short lever separately, so I used that. I think it is better to use a separate color for the handlebar system of CUB because it is 19Φ.
The clamp part is attached to the Plus screw… I guess it is inevitable due to the price range, but since it has the role of a lever clamp, a certain amount of force will be applied to the part, and I recommend changing it as soon as possible.
Please note that this is a KITACOOriginal installation diameter, not Honda, Yamaha, SEA BASS, or Kawasaki type.
View detail
Fits: Others (Φ22.2)
PetitCustom
For PetitCustom around Handlebar View detail
No problem with the MONKEY125.
The Grom, Engine and Frame are almost the same, so I installed it on my Monkey 125 without any problems.
The wire is made of a more durable material than the NORMAL wire, so you don't have to worry about it rusting.
Also, I used Stainless Mesh, but it's thicker than the Hose in Brake's Swage line, so it looks as if I used hydraulics.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
I want to cancel it.
I found out the delivery date, it will be 8 months away.
and the email came at 16:48.
If it's going to take that long, I'd rather Cancel.
I didn't do anything and got an email at 5:45pm saying my order was accepted.
I really want to Cancellation.
What should I do?
View detail
Used for YZF-R15
YZF-R15 (MODEL in 2012) The symptom which can be said to be a chronic disease of the Clutch Wire which breaks came.
This is the third time I have changed the Clutch Wire on my R15. (Lol)
It seems silly to buy an OEM Clutch Wire that I know will break anyway, so I thought I'd try an alternative.
The deciding factor in the purchase
An acquaintance of mine told me that the Clutch Wire for this Grom could be used as is, so I bought it.
This is the first time I have used this Clutch Wire itself as I have been replacing it from OEM to OEM.
I am not particular about the color, but I bought Black because Black was in stock.
The OEM Clutch Wire has an L-shaped angle near the Handlebar that is too tight, and many people have broken it at that point, but this product doesn't have that L-shaped angle, so there seems to be less worry about it breaking.
[Impressions of using it]
It can be installed without any modification.
It is slightly longer than the R15 OEMWire, but Level is not a problem.
The replacement time was about 30 minutes including the adjustment from removing the Cowl.
I drove a little bit after the replacement, but the clutch operation is very smooth and I feel it is better than OEM.
I used the Nut that originally came with the OEM because it only contains one Nut for the fixed part with the Engine.
【Review】
I installed it myself and I'm glad I was able to use it without any problems.
Because it is slightly longer than the OEM Product, I was worried that the Clutch would be heavier, but that effect seems to be non-existent.
Now I'm hoping to see how long it will last.
View detail
Fits: Others (Φ22.2)
The Clutch is very sharp.
When I changed to the Reinforced Clutch, the Normal clutch lever didn't break the clutch, so I bought this one. I chose the short lever because of its looks and the ease of operation. Clutch operation is much better than I expected, and it is very comfortable to drive. Longer lever is better for those who want to lighten the handling power.
I use DAYTONA centralized switch, but the operability of Passing is not good because Passing switch is near Lever, but each operation is acceptable because there is almost no Situation to pass with MONKEY. It gets better, so it's Recommendation.
View detail
To make Custom feeling ......
I exchanged it to make sense of unity and Custom feeling around Handlebar. Axel side also same KITACO's Throttle Cable (Stainless Mesh OEM Length) As I was exchanging it, I wanted to unify it. The exchanged Clutch Cable is also the Stainless Mesh OEM Length. I changed Handlebar to HURRICANE Forward Conti 2 type, but Throttle - Even Clutch Cable OEM Length, handling needs slight adjustment, but different View detail
Fits: Others (Φ22.2)
It is cheap and easy to use
I tried installing Mirror on Gamma 's Handlebar
There are similar Parts to DAYTONA, but KITACO made it easy to divert it because there is plenty of wire attachment part of Lever
I feel a grasping feeling heavy, so I cut it to Lever and processed it somewhat, but it is cheap Parts so let's put up with the structure and finish of the side so that it is suitable for the price
View detail
Fits: Others (Φ22.2)
Used for changing Clutch lever
I use it with MONKEY's Custom. We plan to attach Mirror to Left Side and selected KITACO Clutch lever Long. Easy to install Cable because it is a Type that inserts Cable's Thailand from the front side. I feel a grasped feeling very lightly. However, since the part to be attached to the Handlebar is not a division type, it was a drawback that it was impossible to install the Lever without removing the Grip and the Switch. View detail
Fits: Others (Φ22.2)
The thing itself is fine, but Bolt rusts very much
【What made you decide the purchase?】
Cheap. Being a Short lever. Universality.
【How was it actually used?】
The quality of the item itself is good. The corner of Lever is somewhat concerned but no problem.
However, Bolt rusts.
【Was it difficult to install? (Hard parts case)】
It is not particularly difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Because Thailand 's reception is in the BusTab shape opened to the front, Thailand co is easier to twist to 90 - degrees..
After that, because Switch reception is easy to rattle and easy to get out, pull a Switch Cable a little
I think that it is good to clamp to Handlebar with feeling.
[Is there anything I was disappointed about?]
Coarseness of surface treatment of Screw.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Only the surface treatment of Screw should improve!
【Have you compared items?】 OEM and other UniversalLever class.
[Others]
We are purchasing with Big.
There are many inexpensive Lever set, but furthermore "Short lever" If it becomes 2015 as of now
Minimoto or KITACO, I think it's a little expensive but about Mukawa.
I chose KITACO by looking at the shape and Brand in it.
Quality is very good and the texture is not bad. Lever Little play in the base part.
I was curious that Lever was a little tight and hit the corner, but I got used to it soon..
Because it is an inexpensive Short lever, I was worried that the pull will be heavy, but once you install it
The weight of pull was almost unchanged. This is good.
Functional aspects are highly appreciated, but the problem is Screw.
All Screw rusts tremendously. It rusts with a single rain.
It seems that it is just Black dyeing process when thinking BlackChromate.
In the image it is a Silver color, but because this is Zinc plating.
I was surprised at the time when pickling with extremely dilute hydrochloric acid before Plating Black color instantly dropped.
I only have to replace the Bolt of Clamp, but since Bolt of Pipod is not Universal
This surface treatment is quite troublesome ....
So, when you purchase, paint Bolt first, or take a look at what you can use from OEM Parts Number
It is better to take measures such as arrival.
Even though things themselves are not bad, they are very regrettable. Bolt definitely improves.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
This price is cheap by the Cable and a Set. with [ since the Manufacturer is also a KITACO ] no complaint -- although he would like to call it ..., the Bolt of Lever root has rusted. This is somewhat regrettable. Although I think that it d
This price is cheap by the Cable and a Set.
with [ since the
Manufacturer is also a KITACO ] no complaint -- although he would like to call it ..., the Bolt of
Lever root has rusted.
This is somewhat regrettable.
Although I think that it does not fracture, since structure of a Lever is solid, it is worried.
View detail
Fits: Others (Φ22.2)
Since the brake side was changed, the clutch side was also changed. It can be operated by light power that surely it is easy to grasp. For some persons, a finger may arrive easily in case of a long lever. (Also brake side the same)
Since the brake side was changed, the clutch side was also changed.
It can be operated by light power that surely it is easy to grasp.
For some persons, a finger may arrive easily in case of a long lever.
(Also brake side the same)
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA APE 100 TypeD
The L long lever & holder was attached to the ape 100. Although the lever itself was thick compared with normal, and it grasped to me with a short finger, although the sag condition of the lever was right just, and it was first uncomfortable, it got u
The L long lever & holder was attached to the ape 100.
Although the lever itself was thick compared with normal, and it grasped to me with a short finger, although the sag condition of the lever was right just, and it was first uncomfortable, it got used immediately.
Moreover, the screw of the pivot part rusted immediately.
However, it is a three stars in touch called such thing kana -.
View detail