Reviews
Colors.
Restore, and since the Brake lever did not get a satisfactory shine even after polishing, I ordered a Lever Cover.
However, since Blue is no longer available, I decided to go with Red.
Since it is a moped, the ball at the leBar End is small, so it was easy to attach.
It is soft, and the operation is comfortable and Recommendation.
View detail
for winter use
I have a Handlebar Cover as a winter spec. but the Brake lever is cold. It is easy to use even with thin gloves. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
Lever does not get cold
Installation was done by wetting the inside of Sponge and Lever with water.
Forcibly attaching it will result in tearing or shredding of the sponge.
*When installing, it was written in red letters not to use organic solvents, oils, or greases because they cause slippage or deterioration.
The effect is outstanding. Lever gets quite cold in the cold winter, so there is a big difference between having it and not having it.
View detail
useful
The material is soft and comfortable, and my fingers stay cool even in the middle of winter, so it is very useful. View detail
To combat the cold.
Used for cold weather.
It prevents your hands from getting cold from Lever.
View detail
To combat the cold.
I use it every year to prevent my hands from getting cold from leever. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
One pointAccent！
I bought this as a One pointAccent on my Brake lever. I like the manufacturer's logo. (^O^) View detail
Installed with no problems
I bought this product because Levers get cold in the winter!
My impression at today's temperature of 4 degrees Celsius is that it reduces the cold considerably, and it goes in easily when detergent is applied at the time of installation.
View detail
Stretchable Fit
This product is relatively stretchy and can be installed safely through the thick part of lever if it is sprayed with parts cleaner to make it slippery. If you spray it with parts cleaner to make it slippery, it will pass through the thick part of the lever and can be installed safely.
Also, since it is not Sponge, it does not contain water even if it rains, and materially, it has an excellent non-slip effect, making Lever operation easier. Since it is not very thick, it is a little insufficient for preventing the coldness of Lever in winter, but it is much better than nothing, so I recommend it to those who endure the coldness of Lever without anything attached. I have been using this product for some time now and the durability is perfect.
View detail
PRO GRIP:#480 lever-grip product number: -- the vehicle type wide use goods corresponding to 74895 merchandise information -- detailed -- color:red inside diameter: -- 10phi die-length: -- please do not let * solvent adhere 75 mm - Lever grip which al
PRO GRIP:#480 lever-grip product number: -- the vehicle type wide use goods corresponding to 74895 merchandise information -- detailed -- color:red inside diameter: -- 10phi die-length: -- please do not let * solvent adhere 75 mm
- Lever grip which also controls vibration that it is hard to slide.
View detail
For improved grip and a subtle fashion statement!
I customized this product for my off-road motorcycle lever, and I love the improved grip and subtle fashion! View detail
Is good
Lever becomes easier to grip and prevents slipping.
The cushioning is good, so the hand feels better when gripping it, and the hand does not get tired.
It is easy to install, but care must be taken not to tear it.
View detail
To prevent Lever from slipping.
In the winter, I use Heated Gloves, but the Gloves do not have non-slip fingertips, so the Lever slips.
I used to put textured anti-slip tape on the reverse side of the lever, but now the leather of the glove has become rough.
That's when I found this product.
I sprayed a bit of perc on the inside and slid it onto the Lever and installed it.
If you use Silicon spray, it will shift even after you put it on.
The feeling of use is Large satisfaction.
You can now do subtle semi-cracks with electric Gloves.
View detail
It can be used for bicycles.
After polishing the brake lever with Water-resistance Paper, use Silicon spray for easy entry! 。 It can also be used for bicycles, and I think it's easier to make subtle adjustments with this on. View detail
For those who ride with bare hands.
I always ride with my bare hands, so I have a soft touch to operate the Clutch lever (a mystery). View detail
It ripped when it was first installed!
The Clutch Side was a breeze to install! But Brake Side ripped it up in one shot! Lever is made by the same brembo. The torn one I touched, the rubber is hard and won't stretch! Did you mix the new one with the sifted one, SP Takekawa-san, that's terrible! I trusted you!
Related Videos
[MONKEY125] For some reason I installed the well-received Parts OUTEXSteering stem stabilizer!
https://www.youtube.com/watch?v=4IqK231SbMQ&t=2s
View detail
Anti-slip, improved grip!
It is installed and used on the OEM Lever It helps to prevent slippage, makes the grip more comfortable, and reduces the vibration transmitted from the Lever When using it on rainy days, use a dry Towel to drain the water out of it If they are still wet, they will shift in position View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It is good ♪
Even with Dress-up to Lever Motorcycle's image changes pretty ♪
Installation is not particularly difficult, but there may be a little hang.
I have been using it for about 3 months, but it seems to be okay for the price as well ♪
View detail
Lever Grip 06-08-3029
SP TAKEGAWA(Special Parts Lever Grip 06-08-3029)last round, black order Come to try and feel that the foam material is good quality, soft and durable, but the screen has some peeling according to usage. At a satisfactory level so decided to order it again in blue. SP TAKEGAWA (Special Parts Lever Grip 06-08-3029) Last Round Black Order Let's try to feel that the foam material is good quality, soft and quite resistant, but the screen is somewhat peeling by the use. At a satisfactory level, I decided to order again in blue. (translated by Google Translator) View detail
Pleasant Clutch, Brake operation
I used it for Lever of GORILLA. Although I bought it by appearance, the car body looks on a top ranking on myself with ease of use and car body color more than it seems.The durability runs about 5000 Km but I am satisfied because it does not cut at dirty position , The difficulty is that it will be able to take with the null null if it gets moisture in the rain, but you can safely travel if you pay attention and I think that Lever will not become cold in winter and it will also be a measure against some cold weather. View detail