![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Lever grip](https://img.webike-cdn.net/catalogue/images/12781/JDHAN53100A0A_1_TS.jpg)
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150
Installation Notes
I think this is a good product for those who ride motorcycles "without gloves". Also, when installing it, you have to be careful when inserting it into the lever or it will tear. You may need to hang it a little. View detail
![Lever Grip (E.G. On Grips)](https://img.webike-cdn.net/catalogue/images/98471/811500_TS.jpg)
Finger-friendly
The grom is Black and I wanted to add color.
Lever grip so it was a simple Accent.
I was just worried that the tip of the lever might shred when I installed it, but I was able to install it successfully.
It was Point to apply a generous amount of detergent when installing.
View detail
![Lever Grip](https://img.webike-cdn.net/catalogue/images/27343/06-08-3028_TS.jpg)
SP TAKEGAWA Lever Grip
About quality and texture It's a common product for sponges About the feeling of use It feels soft Products to buy together None. Difficulty of installation It's hard. I'm wearing a takegawa quick lever, but the end is round, so it's hard to put it in from there Cost performance and comparison with other products The price is good, but it feels like a one-time product About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I was going to use the reinforced clutch because my hands felt tired, but if I installed it now, I thought it would not be usable at all during the riding season, so I postponed the installation View detail
![YAMASHIRO YK-012 Lever Grip](https://global.webike-cdn.net/uiu/impression/202201/16_1019767_61e36a4739421.jpg)
Short Maybe too short for lever.
Installed on the short lever of NisshinHorizontal TypeMaster Cylinder.
The fit is a little worse with the short lever.
However, I don't mind using it because it doesn't make me gap.
It is functional.
View detail
![Lever Grip](https://img.webike-cdn.net/catalogue/images/27343/06-08-3028_TS.jpg)
As a measure against cold, it is better than nothing.
I installed it on the Scooter that I use for shopping, etc.
It is installed on Initial ModelBirdCity125 and OEMLever.
I bought this to see if it would help with the coldness of the Lever, which is transmitted even when wearing winter Gloves.
When I actually use it, it's better than nothing, and cold things are cold, but I feel that the speed at which the heat is taken away from my fingertips has slowed down.
It is uncomfortable at first because Lever becomes thicker when you put it on, but it does not interfere with Lever operation because there is an unevenness that matches your finger.
When I put it on, I tried to put it on Lever without thinking anything and I went as far as wrapping the ball of LeBar End, but it didn't proceed from there. I remembered that I used detergent in the impression of other people and I put 1 or 2 drops of kitchen dishwashing detergent in the hole. I put a drop or two of kitchen dishwashing detergent in the hole, and it went in easily.
It moves right after I put it on, but after a few days, it doesn't move anymore.
View detail
![Lever grip #480](https://img.webike-cdn.net/catalogue/10758/74894-1_TS.jpg)
I can hold Lever firmly.
Lever grip is a pain to install every time.
It's a common method, but I use detergent to install it.
It is Large strange to put the head part in every time, but once it is in, it is Large strong.
However, if you struggle with it too much there, it will dry out and the second half won't glide and you'll end up with a thousand pieces.
However, the grip feeling when gripping the lever is completely different between having this and not having it.
View detail
![Lever Grip](https://global.webike-cdn.net/images/reviews/295/00001006295L.jpg)
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
![sg](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/sg.gif)
Lever grip
Brought it to use better grip for brake lever and clutch. Not easy to install. During install need use some trick to put in lever. Comfort and nice looking View detail
![Lever Grip](https://img.webike-cdn.net/catalogue/images/27343/06-08-3028_TS.jpg)
Get cold
It's hard to get in, so when I paint Bead wax in, I entered it very easily.
However, after putting in, slipping too much will wrap around it unless you wipe it off.
View detail
![Lever Lap (Black)](https://img.webike-cdn.net/catalogue/13652/526-0500000_TS.jpg)
If you would like to change the appearance of Lever, please.
Purchase to reduce coldness from Lever in winter. However, there was hardly any effect in the outside air temperature 1 ℃ ~ 2 ℃. However, by covering Lever, I am satisfied with self-satisfaction as to whether it is a bit fashionable. Also, when Liding touch is not wearing Riding glove, Lever touch thinks that there is no sense of roughte than bare hands, as long as there is Sponge.
View detail
![Lever Lap](https://img.webike-cdn.net/catalogue/12010/leverwrap_image-1_TS.jpg)
This Manufacturer is white
After using Grip of ALCAN hands, it became interested in the thing of the same Manufacturer and purchased this.
Although it is a casual fashion, there is no way for performance to complain.
The indentation of the part where the finger is caught is JUST and the finger in the state without attachment Quantity : It is easier to do when attaching than 2pc brackle so it is easier for Brake and Shift change.
Although it is Small Parts, it is a dish that seems to have a tremendous Large thing in its Small Suspension.
But, if you compare the operability
Inevitable in thick Winter Gloves .... Well it seems that way.
View detail
![POWER Lever Sleeve](https://img.webike-cdn.net/catalogue/10321/pr135bk_TS.jpg)
To counter the coldness of the fingertip
Installed in XT660ZTENEREOEMLever.
It's Square like Chikuwa.
Installation was really Large strange. Even if it got wet with water I was not able to put it easily. Lever It does not even round the tip of the tip.
- I made a kitchen detergent with water that was dissolved
- Even if you try to bare it with bare hands, because it slides for detergent, wear gloves
- The Lever tip fits in guts while spreading the Sponge
- Then rotate it gently and screw it in
- Afterwards rinse it with fresh water generally, dry it and make it. (There should be some detergent, but it will be disintegrated in a while)
= About usability =
Since the area around the finger became fluffy, at first it was Clutch / I could not grasp the feeling of Brake 's operation feeling, drawer' s feeling. You might as well avoid avoiding sudden clutter driving.
In addition, although I ran in the cold wind, I felt the effect was certain. The finger tips will be difficult to cool down. I felt that Aluminum Lever had been taking a lot of body temperature so far. It's Level that you are going to be the last, but it was nice to install.
View detail
![Lever Grip #480](https://img.webike-cdn.net/catalogue/10758/74894-1_TS.jpg)
Good with this hand goods
It was attached to xr 250 before. First of all, Material : Rubber is good but Length is insufficient After 2 centimeters long it is good If it may be unavoidable on the material, but if you use it
Rubber twisted, so I used it a lot and lost it
Currently I use Silicon tube but this one is pretty good. I think that it is good as a product of this hand to those who are said to be not dedicated.
View detail
![POWER Lever Sleeve](https://img.webike-cdn.net/catalogue/10321/pr135bk_TS.jpg)
Since the Lever was cold and disagreeable, it equipped with the winter season. Since the direction which does not have summer conversely feels cool, he would like to remove, but primarily, since the wearing itself is hard, removal is not expectable.
Since the Lever was cold and disagreeable, it equipped with the winter season.
Since the direction which does not have
summer conversely feels cool, he would like to remove, but primarily, since the wearing itself is hard, removal is not expectable.
Although it is
Aluminum shaving and has equipped with the thing Lever, appearance and a Lever touch are spoilt in putting this.
A winter season is certainly good also at
.
It is the optimal Items for a person more practical than appearance that makes the
Handle cover this.
View detail
![Lever Sponge](https://img.webike-cdn.net/catalogue/images/27481/p84122_TS.jpg)
About attachment, since it is somewhat tight, pains are taken to thrust, but a wearing feeling can be used satisfactorily. It is dramatically useful for the purpose of preventing a Lever sliding especially on a rainy day, and a feeling of operation
About attachment, since it is somewhat tight, pains are taken to thrust, but a wearing feeling can be used satisfactorily.
It is dramatically useful for the purpose of preventing a Lever sliding especially on a rainy day, and a feeling of operation becomes good.
A price also thinks again that it is a cheap Items with a sufficient Cost performance.
View detail
![Lever Sponge](https://img.webike-cdn.net/catalogue/images/27481/p84122_TS.jpg)
It attached to V-Strom and a DF125 DJEBEL in December, 2011. Since the Lever did not get cold, pain decreased to also carry out a Touring. I think that an effect increases by using the Items of such windscreens together since a Handle cover is attac
It attached to V-Strom and a DF125 DJEBEL in December, 2011.
Since the
Lever did not get cold, pain decreased to also carry out a Touring.
I think that an effect increases by using the Items of such windscreens together since a Handle cover is attached as for the
DJEBEL and the Bush guard is attached, respectively as for V strike.
a rent will go into the Clutch side of V strike in
, however March, 12 when the year began -- perfect -- use -- impossible .
The Brake side has also split in May.
Is the direction of the
DJEBEL because it is changing to the Short lever of DRC? For the moment [ ? ], a rent is not on right and left in since the frequency where it rides is low.
It compares and possibly did not suit the Lever of thick V strike.
It remains as it is, and incidentally V strike hangs a Cover and they are [ two ジェベs are located in a line on good terms, and ] unauthorized parking.
Seemingly, that will not be right although the direction of V strike which ultraviolet rays do not hit easily is likely to last long environmentally.
View detail
![Lever Lap (Black)](https://global.webike-cdn.net/photo/article/62/1298900773262L.jpg)
Pains was taken over attachment. Attachment is serious if soapsuds or the thing which does something a slide is not attached to a lever. The coldness of the lever was eased considerably. Since the lever merely became thick, it became slightly
Pains was taken over attachment.
Attachment is serious if soapsuds or the thing which does something a slide is not attached to a lever.
The coldness of the lever was eased considerably.
Since the lever merely became thick, it became slightly far, but it got used immediately.
I think that appearance is also good.
It is slightly expensive for sponge.
View detail
![Lever Sponge](https://img.webike-cdn.net/catalogue/images/27481/p84122_TS.jpg)
Cygnus X-SR for commuting (SE12J) was equipped. A winter season and metal levers are cold. The coldness of a lever can be eased if this lever sponge is used. Although the touch of a lever is not bad, also well, there is particularly. [ no ]
Cygnus X-SR for commuting (SE12J) was equipped.
A winter season and metal levers are cold.
The coldness of a lever can be eased if this lever sponge is used.
Although the touch of a lever is not bad, also well, there is particularly. [ no ]
It can do for fun in case of a slender lever.
In that case, it becomes easy to operate the taped direction.
Although I consider [ that it can respond to a lever authentic positive in each company, and ], wearing (insertion) may be difficulty at a lever and the lever of a large-size car with a larger ball of a part.
Although it is sponge with pliability, it will split, if it is strained since it is sponge after all.
It adds that it was not able to reduce, although the thicker heat shrinkable tube for coldness mitigation was incidentally used.
View detail
![POWER Lever Sleeve](https://global.webike-cdn.net/photo/article/23/1291992665623L.jpg)
It attached to honda forza MF10. Although it soaks in a package with water and being attached, when doing just like that at first, since it did not enter at all, detergent for kitchen was thinned and used. It entered very well and still ran away.
It attached to honda forza MF10.
Although it soaks in a package with water and being attached, when doing just like that at first, since it did not enter at all, detergent for kitchen was thinned and used.
It entered very well and still ran away.
Since it is developed for motorcycles, die length and thickness are right just.
Since the lever touch also became light, the burden of the fingertip reduced in the urban area which has lever handling frequently.
I think that it is good also for protection against the cold of winter.
Since it is sponge after all, uneasiness is merely in durability.
When also considering the price as sponge, I thought slightly high kana.
Next, I think that it is looked for whether there is any same thing at HOMUSEN when purchasing.
Although it is parts conspicuous [ seldom ], it may be a fashion if it sees from those who see.
View detail