Reviews
Colors.
Restore, and since the Brake lever did not get a satisfactory shine even after polishing, I ordered a Lever Cover.
However, since Blue is no longer available, I decided to go with Red.
Since it is a moped, the ball at the leBar End is small, so it was easy to attach.
It is soft, and the operation is comfortable and Recommendation.
View detail
Soak before fitting
I soaked them in warm water prior to fitting, as per the advice of other reviewers.. No issues getting them on the levers, it did take a few minutes for each side though. They are sufficiently firmly in place that they don't move around at all. Although I expect they may shift a bit if they get wet. View detail
difficult to install
It was difficult to install and tore during installation. View detail
for winter use
I have a Handlebar Cover as a winter spec. but the Brake lever is cold. It is easy to use even with thin gloves. View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150
Installation Notes
I think this is a good product for those who ride motorcycles "without gloves". Also, when installing it, you have to be careful when inserting it into the lever or it will tear. You may need to hang it a little. View detail
Difficulty in inserting into Lever is a drawback!
It feels good and will last about a year! The only …Minus is that it's hard to insert into the lever!
I can't get it in properly unless I put it in boiling water to warm it up… it rips if I force it in lol.
View detail
SP Mukawa Lever grip
[How is it used?
Used for scooter levers
Was the one you received as per Image?
As per Image
How was your experience with it?
Good feeling when gripping.
[Points to note]
May not fit depending on Lever size
How did it compare to other products?
There is no comparable product.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
If you try to fit it in when it's cold, it rips.
When I tried to fit it, it ripped and was destroyed before I could use it. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
Lever does not get cold
Installation was done by wetting the inside of Sponge and Lever with water.
Forcibly attaching it will result in tearing or shredding of the sponge.
*When installing, it was written in red letters not to use organic solvents, oils, or greases because they cause slippage or deterioration.
The effect is outstanding. Lever gets quite cold in the cold winter, so there is a big difference between having it and not having it.
View detail
useful
The material is soft and comfortable, and my fingers stay cool even in the middle of winter, so it is very useful. View detail
To combat the cold.
Used for cold weather.
It prevents your hands from getting cold from Lever.
View detail
To combat the cold.
I use it every year to prevent my hands from getting cold from leever. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
One pointAccent!
I bought this as a One pointAccent on my Brake lever. I like the manufacturer's logo. (^O^) View detail
Installed with no problems
I bought this product because Levers get cold in the winter!
My impression at today's temperature of 4 degrees Celsius is that it reduces the cold considerably, and it goes in easily when detergent is applied at the time of installation.
View detail
Stretchable Fit
This product is relatively stretchy and can be installed safely through the thick part of lever if it is sprayed with parts cleaner to make it slippery. If you spray it with parts cleaner to make it slippery, it will pass through the thick part of the lever and can be installed safely.
Also, since it is not Sponge, it does not contain water even if it rains, and materially, it has an excellent non-slip effect, making Lever operation easier. Since it is not very thick, it is a little insufficient for preventing the coldness of Lever in winter, but it is much better than nothing, so I recommend it to those who endure the coldness of Lever without anything attached. I have been using this product for some time now and the durability is perfect.
View detail
Comfortable when riding bare-handed
I ride bare-handed in the summer, and it feels much better on my fingers when I have it. I don't feel like riding without it.
When installing, it will not go in if it is only wetted with water, so it is easier to install if a mild detergent is applied to the lever side.
The clutch side tears early, but this is also the case with other companies' products.
View detail
Finger-friendly
The grom is Black and I wanted to add color.
Lever grip so it was a simple Accent.
I was just worried that the tip of the lever might shred when I installed it, but I was able to install it successfully.
It was Point to apply a generous amount of detergent when installing.
View detail
SP TAKEGAWA Lever Grip
About quality and texture It's a common product for sponges About the feeling of use It feels soft Products to buy together None. Difficulty of installation It's hard. I'm wearing a takegawa quick lever, but the end is round, so it's hard to put it in from there Cost performance and comparison with other products The price is good, but it feels like a one-time product About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I was going to use the reinforced clutch because my hands felt tired, but if I installed it now, I thought it would not be usable at all during the riding season, so I postponed the installation View detail
Not good
It was not good. I installed it once, but it didn't feel good. I took it off. It may be a matter of taste. View detail
PRO GRIP:#480 lever-grip product number: -- the vehicle type wide use goods corresponding to 74895 merchandise information -- detailed -- color:red inside diameter: -- 10phi die-length: -- please do not let * solvent adhere 75 mm - Lever grip which al
PRO GRIP:#480 lever-grip product number: -- the vehicle type wide use goods corresponding to 74895 merchandise information -- detailed -- color:red inside diameter: -- 10phi die-length: -- please do not let * solvent adhere 75 mm
- Lever grip which also controls vibration that it is hard to slide.
View detail