Reviews
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
![Stainless Lock Wire [0.57mm] 5m](https://img.webike-cdn.net/catalogue/11305/056-0500057_TS.jpg)
Wiring.
I bought it to do Wiring.
It is safe to say that it is for Motorcycle.
I wanted to use it just a little bit, so I was glad to find a shorter length for sale.
View detail
Wire Fixing
It is 1m short for wiring. This time I bought it for fixing to suppress wobble of change shift which is a chronic disease of GB250 CLUBMAN. 0.57mm is just right and 0.6mm is not enough to fit in the gap of change shift, so I could not wrap it. I am worried that it will break, but it is a first aid measure, so I would like to see how it goes. View detail
Easy to store!
I used it for Filler cap and Grip. Grip is about to be replaced so I used it as a first aid spec. 25m long so I don't mind if I fail in wiring. It is 25m long so I don't mind if it fails in wiring lol. View detail
First aid for Cowl cracks
[How is it used?
I used it in Repair of a Chinese Cowl that had cracked some time ago.
We chose KITACO's Stainless Steel Wire because we also planned to utilize it for Wiringetc.
How was your experience with it?
We drilled a hole around the cracked area and threaded it through to fix it so that it would not flap for the time being.
I think it would be a little more exact if I applied a guess board, etc., but it was too much trouble, so I covered the top with tape to cover it up.
If you want to fix it properly, Plastic repairetc. There are many ways to do it, but it was enough to fix it for now in a short time.
How did it compare to other products?
I thought that the appropriate needle Gold would be fine, but I decided to use this product because it can be used in a variety of ways.
It has a fairly large capacity, so I don't think you will run out unless you are on Raceetc.
[Points to note]
Not particularly
【Review】
Large capacity and reasonable price.
It can be used for various purposes such as fixing Wiring and Grip.
View detail
I chose it for its capacity.
Large capacity and Reasonable. I wonder if I can use it in my lifetime…. View detail
Wiring for the first time
What made you decide to buy?
Wiring is mainly to prevent parts from falling out. Oil Filler CapSecurity is reinforced this time, the Oil Filler Cap of Motorcycle is bare and can be easily loosened by hand except for its special construction. If it is pranked or … stolen on the road, … that's why I bought it.
[How did you like it when you used it?
The wire used for wiring seems to be basically Stainless Steel Wire.:Pro safety wire is a soft stainless steel wire packed in a compact resin case. The wire size is 0.6mm. I was concentrating on my work, and when I realized, my hand was bleeding. Also, be careful not to scratch the area around the installation. Also, be careful not to scratch the area around the installation. I installed this wire ring for the first time, but I twisted it too much, and it got shredded in the middle, … the twisting position did not work, … I failed many times, but the contents are 25m long, so you don't have to worry even if you make a mistake. With the current construction, it will be years before the Wire is gone.
View detail
DAYTONA Pro safety wire
After using a wire, it becomes RoseRose, or bounces around, etc., and you feel trouble in storing it. However, this type is used by pulling it out of the resin case, so there is no need to worry about such hassles. It is very easy to use. View detail
It is effective for loosening, and it is also sustainable.
This product is effective in loosening screws and other fasteners. I like the long-lasting effect and the compact case for easy storage! View detail
![Stainless Lock Wire [0.57mm] 5m](https://global.webike-cdn.net/photo/impression/24/2470e801d5f5ce9370843cf001447cf9L.jpg)
Also dedicated to Motorcycle
Initially, I sought cheap ones from Homesense, but I have heard that they are easy to break.
I was able to attach the grips without worry, as they showed no signs of breaking even though I twisted them a little too hard during practice.
This was my first time Wiring and I am satisfied with the finished product.
When I purchased it, I thought it might not be enough, but this amount seems to be able to do quite a few times.
View detail
Easy to use
There are surprisingly times when it is necessary and Stock.
Convenient
View detail
To Grip's Wiring
I use it for the grip wiring of my yz125. It's made of stainless steel, so you don't have to worry about it rusting.
I recommend it because the price is cheap and the quantity is just right. I think it is also easy to use for other Wiring of Boltetc.
View detail
Cost performance good
I had trouble with the other size thingy. Large also means Small That's why I bought the 0.8mm.
I am using it for wire lock. If it is thinner than this, I worry about the strength, but if it is 0.8mm, I feel secure.
It is also a universal product that can be used for many things, not just wire locks.
View detail
That would be handy
Shoddy Wire will run out quickly though.
This can be used normally.
This is a must-have item for your toolbox as it can be used for repairing cars and houses as well as motorcycles.
You can also keep some length in your on-board tools to help you in case of a fall Repair.
It is not easy to reduce, but I will buy the next one.
View detail
Essential Items for Race Activities
Wiring is a must-have item for race regulations, and although there is a small amount of wire in the package, I think it's better to buy the bottom type if you are still racing. I think these are frequently used items. View detail
Easy to use
It's a standard thickness lock wire and very easy to use. The best part is that it comes in this Case. I've had it for more than 20 years and it hasn't gone away. I think it's going to last a lifetime in my personal youth, so it's a Recommendation that you should have a few wire locks in your street. View detail
Wiring.
Wiring is required for the cars competing in the race:KITACO's Stainless Steel Lock Wire is available in several different thicknesses, so you can choose the one that best suits your needs.
This thickness is a good salt, not too hard and not too soft. The thickness is just right and I think it can be used anywhere.
However, be careful when twisting with Twister because it is easier than you think.
View detail
You don't use it up as much as you think
It's used for the Grip, Drain bolt, and Oil Filler Cap when wai-ring to I am
It is easier to pass the wire through the hole and use it with Grip than the normal one If you do
I like to use it because it doesn't hit my hands
The wire is thin, so it is natural, but if the wire is twisted, it will be cut off, and the wire will be broken It's easy
View detail
Will it last a lifetime …
This is the so-called Gold Needle for Wiring
The thickness is 0.57mm, not too hard, but not too easy to break
Wire twister and Quantity:Buy in a set
There's a lot of it in there, so even if you're a Race player, unless you're too bad at it to waste it, it's going to last pretty well I think
I don't know if I can use it up in my lifetime lol
View detail
usually
I bought it for the Grip's wire lock, you don't need it in a large amount and you can use it a few times With both Grip and Grip, I think there's a lot of room for 4 times or so The fineness was just right View detail