Reviews
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 909-1083001
There was a need to replace the cables on my Honda Monkey. The original cables had damage to the outer jacket. To my delight, KITACO had these items in its product range. And KITACO was not let down, the quality of the cable turned out to be on top. There were no problems with the installation. View detail
It's true, Clutch is light.
The OEM handlebar had been replaced, so the OEM length was quite excessive, and the clutch felt too heavy, so I replaced it. It really lightens the weight, and I wish I had replaced it earlier, it would have made long touring easier, but no regrets. View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
สายครัชเดิม งานดีครับสวย monkey z50 View detail
Stainless Mesh, which I used to adore.
I changed it because I adored Stainless Mesh Cable when I was a student, and I am Large satisfied. View detail
Clutch Cablefor Replacement
The current Cable was about to run out, so I replaced it with this one.
I just changed it, so I don't know how durable it is yet, but it seems to be strong.
View detail
Is it a recommendation for those who value appearance?
Used for MBX50F.
I purchased and replaced it just for looks.
Bought it for the looks, too bad you can't see much of it in the shadow of the Tank, I knew that, but...
Depending on the installation, can it be made to stand out? (I don't like to see Wire outside, so I keep it quiet...)
The movement of the wire itself is not so different from that of the OEM, but if the wire has deteriorated too much or if the rust on the wire is noticeable, we recommend replacing the wire, but we are not sure if it is that good.
View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
From Red to Black
When the clutch cable I had previously used broke, I replaced it with a cable I had on hand, but I could only find a red-colored cable.
I replaced it anyway, but the Red color Cable is still the same. "Everything" The first time I saw it, I didn't like it because it had a
We decided that black is the best color for cables, so we replaced the cable with this one.
View detail
Products for peace of mind
It is safe to use
In my environment of use, I do not feel any special deterioration even after several years of use, but I am replacing it just in case.
View detail
Since it was ? time-tested product parts attached wholly, he bought it. A red wire is dressed up and is cool. Although attached and run, it is unchanging in it being pure. But I think that it is durable since the wire is a stainless.
Since it was ? time-tested product parts attached wholly, he bought it.
A red wire is dressed up and is cool.
Although attached and run, it is unchanging in it being pure.
But I think that it is durable since the wire is a stainless.
View detail
It's absolutely RECOMMENDATION over NORMAL!
[How is it used?
The normal cable is getting old and is not working well, so we decided to upgrade the cable as a replacement.
Was the one you received as per Image?
Parenthesis is good because you can see that it has been replaced by the color as shown in the Image!
Was the installation difficult?
It is only an exchange with the NORMALClutch cable, but for the first time, you may be confused at the spring part on the clutch receiver side.
How was your experience with it?
The Normal cable was old and no good, but this one with Stainless Steel Wire is lighter and seems to be more durable.
[Included Parts:were they on?
Quantity:Since it is a Set, RubberBoots, etc. are installed.
[Was there anything that disappointed you?
Not at all. I am satisfied.
▼ The construction is pretty solid, and I think it's a better product than the NORMAL!
View detail
Used for ModernWorkScratch
I bought it for the same secondary Clutch, ModernWorks for Clutch.
In the end, we could not use it as it was, but cut 2 cm of Outer and used it.
View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
No need to say anything as it is an exclusive product.
When I replaced the Engine of MONKEY with CD90, I will not have enough Cable of Clutch which I had enough until now. I bought a 10cm Long for it.
Cable for KITACO's LeftLever&Holder.
View detail
I was able to install it on my CL50.
It is for CD50 but installed on CL50.
Normal wire rusted and stuck. 。
OEM Parts discontinued.
There were no problems with installation, and the stainless steel wire makes the movement lighter.
View detail
This is an impression after using it for less than 10 years.
I bought it because OEMClutch Cable of KSR2 which I bought used became frayed from Wire of Lever holder part. It becomes an impression after using it for less than 10 years below.
It is mainly used for street riding. When I stored it at home, I used Motorcycle Cover outdoors, and when I went out, I exposed it to the wind and rain without Cover for about half a day.
When I don't use it for commuting, it's just CHOINORI, so I don't think the total distance is that long.
I have been using Waterproof Grease on the Thailand core and Wire grease or WAKOS Maintenance Lube on the wire.
First of all, the price seems to be almost the same etc. as OEM Product now and then.
Because it has not compared with OEM new, it is uncertain, but the movement of Wire feels Smooth obviously whether it is high or the influence of Teflon tube inside.
I think the quality of the wire itself is also higher than the one made by KITACO.
When the quality of the wire is bad and it becomes loose, frayed, or bent immediately, it gives a large influence to the operability of the wire, but the wire of this product has the pin and tension, and there is an impression that it seems to be strong to the bend of the holder part which is common.
The color is only Red, and our KSR is also Red, so I was satisfied with the color match with the car body color at the beginning of installation, but the color faded rather early. I am sorry about that.
It faded in less than three years, I believe, due to our use described at the beginning. If it had been exposed to direct sunlight, I think it would have faded even faster.
I think Red is one of the most vulnerable colors to fading, so I think there are a certain number of people who would like Manufacturer to set Black.
There are no problems with the lubrication and operation of the wire. However, the faded color is quite noticeable, and it looks a little shabby with the body of the vehicle.
The performance and durability of the wire itself is excellent, so I would like to see the Manufacturer offer a Black color.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA
Shift comfortably with FrictionFree!
Large satisfied with the very good finish and feel of operation. View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
Easy wire adjustment
I replaced it with KITACO's Holder setLever, which I replaced with Reinforced Clutch because NORMALLever may not cut the Clutch. It is.
The tension of the wire and the sharpness of the Clutch is good.
View detail
Satisfied with Cospa
I bought it for KSR2 Maintenance and it's a 20 year old Motorcycle! I was looking for a new Clutch Cable soon, and I found it! And if you read the impressions of trusted brand name purchasers, this is the one to buy After the replacement, the Clutch is lighter and more fun to ride View detail
I think that goods are good but since there is something different from the picture, evaluation can not be done.
Clutch Cable is different from the picture one. I am very sorry to accept Shock ,,,
It is not a Clutch Cable that can be attached to Monkey normalEngine It is very disappointing,
View detail
As expected after all
Even if Clutch adjustment, Cable adjustment, operation Feel and GEAR entering is not so good, we exchanged.
KITACO Clutch Cable attached in the previous Motorcycle.
Cost I liked it low, so I did it this time as well.
Impression after trial run, Lever operation is also light, GEAR entrance is also nice feeling.
I do not know the durability yet, so there are 4 ★.
It is even better if there is Outer cable color Black!
View detail
Cost performance ◎
As I received it yesterday, today I installed it immediately.
Installation is very simple as it is MONKEY
, If there is ten minutes of things, can we make adjustments?
Removing the cable before replacement, the movement of Wire is very reluctant,
After the exchange, it became the lightness of surprise.
Even though I left the Clutch lever, there was a feeling that I felt a bit like touchingly,
After exchanging it will return with lightness like you added in Spring.
Thanks to that, Clutch with a slippery feeling can expect a little improvement.
This time, because there was something I wanted to buy elsewhere, I made it cheap Red,
Since quality seems to have no problem at all, Custom feeling comes out in color,
I think that it was good..
View detail