Reviews
Fits: HONDA CB400SUPER BOLDOR vtec III, HONDA CB400SUPER BOLDOR vtec III, HONDA CB400SUPER BOLDOR vtec Revo, HONDA CB400SF Revo, HONDA CB400SF vtec III, HONDA CB400SF vtec II, HONDA CB400SF vtec I, HONDA CB400SUPER BOLDOR
[Webike Monitor] The Clutch cable was made into a 15-cm Long with Handle change. Making is solid and appearance, a using feeling, and a feeling of a Fit are not different from a pure Cable. It was likely to be enough also with a 10-cm Long fo
[Webike Monitor] The Clutch cable was made into a 15-cm Long with
Handle change.
Making
is solid and appearance, a using feeling, and a feeling of a Fit are not different from a pure Cable.
It was likely to be enough also with a 10-cm Long for Hardy road bar HIGH at
CB400SF.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA
It is solid from the pure thing and I also regard bending of a Wire as few. Since he likes that with which the Outer wire is coated, I also raise intensity and think again that it is good by pure temperament (since it rubs against a car body and is
It is solid from the pure thing and I also regard bending of a Wire as few.
Since he likes that with which the Outer wire is coated, I also raise intensity and think again that it is good by pure temperament (since it rubs against a car body and is hard to attach a crack).
View detail
It is changed and surprised although only the A little had doubt! To be sure, it is light. . . Although it has sometimes just lubricated, it turns out that it is light. After will be perfect if the number of times that a hand will becom
It is changed and surprised although only the A little had doubt!
To be sure, it is light.
.
.
Although it has sometimes just lubricated, it turns out that it is light.
After
will be perfect if the number of times that a hand will become hurts less if a periodical Maintenance is carried out becomes fewer (smile).
View detail
If it was Z system, the Matching with the time-tested Handle made from Z Parts was OK. I think that Size Exactlies are satisfactory goods by this Handle. However, the direction of brand-name parts seems to be reliable too. It is dependent on a Mai
If it was Z system, the Matching with the time-tested Handle made from Z Parts was OK.
I think that Size Exactlies are satisfactory goods by this Handle.
However, the direction of brand-name parts seems to be reliable too.
It is dependent on a Maintenance and a turning point is likely to come out in durability.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
He would like to make clutch operation light and it is exchanged. Since the KATANA is made into the Up Handle and it has exchanged to the Clutch wire for 750S, it is surprised that there is a Stainless wire substituted secretly and made! . Since it is [
He would like to make clutch operation light and it is exchanged.
Since the KATANA is made into the Up Handle and it has exchanged to the Clutch wire for 750S, it is surprised that there is a Stainless wire substituted secretly and made! .
Since it is [ Can it purchase a
750S authentic positive one? ] doubtful (it is not investigating), it is a delightful limitation.
Although
intensity is not expected too much [ steel must be stronger and ] therefore than a STAINLESS STEEL, it is expected that the possibility of the open circuit by rust decreases.
Although he hoped that the attached comment may have become easy, they do not change --
It is useless only with a Wire.
View detail
At the beginning, the Inner motion was more astringent than the pure Cable. since cable length is long -- resistance -- the place which put the Grease spray between the Inner and the Outer although many was thought -- an improvement. With [ it is sm
At the beginning, the Inner motion was more astringent than the pure Cable.
since
cable length is long -- resistance -- the place which put the Grease spray between the Inner and the Outer although many was thought -- an improvement.
With [ it is smooth and ] no problem after that.
Since it purchased at a low price pure, it was good.
The goods of
NORMAL length are also in addition good to have a Lineup carried out.
View detail
Fits: HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET
Although the Axel Wire was ordered for the Axel-Wire piece, the Clutch wire was also ordered in passing. Since it was what carried out used purchase of the car body, to the same Timing, he thought that it would go out soon and they were worries
Although the Axel Wire was ordered for the Axel-Wire piece, the Clutch wire was also ordered in passing.
Since it was what carried out used purchase of the
car body, to the same Timing, he thought that it would go out soon and they were worries.
It is easy, and
exchange does lubrication work and is completion in tension adjustment.
The
motion also became a Smooth.
The Clutch wire attached until now [
] is under storage as a reserve.
View detail
Since the Wire of the NORMAL kept that he was poor, it exchanged. I become an One point in red too, and think that looks are good. engine performance -- a pure new article -- it is equivalent -- although I think -, it does not know for det
Since the Wire of the NORMAL kept that he was poor, it exchanged.
I become an One point in red too, and think that looks are good.
engine performance -- a pure new article -- it is equivalent -- although I think -, it does not know for details.
Although it was used several months, there were no problem etc.
Thank you for .
View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD
It exchanged and the heavy grip also became light. Although it is a Parts without gaiety, polite structure can be used in comfort.
It exchanged and the heavy grip also became light. Although it is a Parts without gaiety, polite structure can be used in comfort. View detail
[Webike Monitor] Since the hole was vacant into the black Tube portion ? of pure Clutch and the Wire had Rusted, it exchanged. The Wire was moved, br(ed) > surprised only by having aslant as people besides had told. after attachment moves
[Webike Monitor] Since the hole was vacant into the black Tube portion ? of
pure Clutch and the Wire had
Rusted, it exchanged.
The Wire was moved, br(ed) > surprised only by having aslant as people besides
had told.
after attachment moves to a Smooth with an uncanny Clutch --
riding the clutch -- it becomes easy to do.
View detail
Since it was restoring, and it was special, also when changing, the Clutch became light and it was surprised.
Since it was restoring, and it was special, also when changing, the Clutch became light and it was surprised. View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI Eliminator 250LX (Eliminator)
Since the price was cheap, it purchased, but it can be especially used without fault.
Since the price was cheap, it purchased, but it can be especially used without fault. View detail
Fits: HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50
[webike Monitor] Since attachment was impossible unless it exchanged Clutch levers when set Switch was attached, but it uses the Wire here, it purchased. Since attachment it is [ attachment ] help that whose price is not high to t
[webike Monitor] Since attachment was impossible unless it exchanged Clutch levers when
set Switch was attached, but it uses the Wire here, it purchased.
Since
attachment it is [ attachment ] help that whose
price is not high to there (smile) should just make it only crawl on the same place as the Clutch wire of a NORMAL, it is easy.
Since the Boots is attached at the place where the Wire by the side of a Clutch is unreserved, the place different from the
NORMAL is a point with sufficient a Garbage and water being difficult to adhere to a wire body.
Although it may be after [
] fancy, I feel that clutch operation became heavy.
(Cause ? of adjustment)
View detail
[Webike Monitor] I think that it is cheaper than the original manufacturer's product, and structure is not bad, either. Although the Axel Wire of ZRX400 made from NTB is used in about two years still now [ ], cannot take a Crimp and s
[Webike Monitor] I think that it is cheaper than the
original manufacturer's product, and structure is not bad, either.
Although the Axel Wire of ZRX400 made from NTB is used in about two years still now [
], cannot take a Crimp and structure is good.
I think whether to be equivalent elegance especially compared with an original manufacturer's product.
When future is also required, I think that he would like to purchase.
View detail
Since having used until now is rusty and it always entered within the field of view during operation, it was worrisome.It was good to change too.
Since having used until now is rusty and it always entered within the field of view during operation, it was worrisome.It was good to change too. View detail
First of all, please take note that the item I purchased and reviewed is different from the item in this catalogue. The model (or part number) of the item I purchased and reviewed is JB016C-S while the item in this catalogue is JB016C00. The reason I post
First of all, please take note that the item I purchased and reviewed is different from the item in this catalogue. The model (or part number) of the item I purchased and reviewed is JB016C-S while the item in this catalogue is JB016C00. The reason I post my review here because the item I purchased has been removed from the catalogue I think. All I would like to say is that the item I purchased is perfectly fit with clip-on (separate) handle bars. And I will be very happy if Webike will consider to take the model JB016C-S back to the catalogue. This will be greatly useful for W400/W650/W800 owners who want to customize their bikes to cafe racer look with clip-on (separate) handle bars. View detail
Fits: KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750
Since the pure Cable had been extended, it exchanged. It is the NORMAL length which was purchased this time [ ]. Although it could be pure, since Mr. Webike's shipment rule of thumb was comparatively early, it carried out here. Since he is con
Since the pure Cable had been extended, it exchanged.
It is the NORMAL length which was purchased this time [
].
Although it could be pure, since Mr. Webike's shipment rule of thumb was comparatively early, it carried out here.
Since he is conscious of the difference by
goods having high quality and it being pure, it does not become precocious.
Although trouble has
exchange truly, this is unavoidable too.
Since fault may come out if it is not made the same at all with
management being pure, cautions are required.
Although it is a new article, probably, it is good again before attachment to carry out a Grease up in the meaning which prevents invasion and rust of moisture.
Since the
Clutch needs to carry out meat adjustment after attachment, according to SM, let's adjust it perfectly.
View detail
a Manufacturer -- the unknown Long clutch cable was attached, and since exchange time was also touch [ soon ], it purchased. Although the vehicle types were 3WPs of SRX250, it was satisfactory to die-length management. Since it was the Just size
a Manufacturer -- the unknown Long clutch cable was attached, and since exchange time was also touch [ soon ], it purchased.
Although the
vehicle types were 3WPs of SRX250, it was satisfactory to die-length management.
Since it was the
Just size, I, the amateur, took pains over attachment for a while, but since スパ っ and a Clutch came to go out, it is satisfied.
Since it is
pure equivalent device, I also regard the next as probably using NTB.
View detail
Since the Normal wire was likely to go out, it purchases. Wires -- 品質勝 -- it was found in the place and Net which were regarded as it being made a Normal wire since there is a negative place. Although it was charmed by the portion made in Japan and
Since the Normal wire was likely to go out, it purchases.
Wires -- 品質勝 -- it was found in the place and Net which were regarded as it being made a Normal wire since there is a negative place.
Although it was charmed by the portion made in Japan and being purchased, there is also no coarse portion as the wording, and it is by touch in case of the goods whose Cost performance is quite high.
I think that I will unify exchange of a Throttle wire etc. with this Brando's goods from now on.
View detail
Although there is not necessarily something specially, since it is too long, at 90 cm of STD, it is felt refreshed in case of a Separate handle.
Although there is not necessarily something specially, since it is too long, at 90 cm of STD, it is felt refreshed in case of a Separate handle. View detail