KIJIMA Motorcycle Air Cleaners / Air Filters Reviews

Filter

Write a review and get Webike Points!

Reviews

KIJIMA

22 Feb 2024

Power Air Cleaner

Fits: YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E, YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E

Japanese Webike user

5/5

Cost and Performance

Power Filter, the standard Tune for intake and exhaust, Powerful.
The Power Filter makes the air flow smoother and provides air without stress to the throttle work, making the engine more responsive and increasing torque and power.
Throttle response when opening the axel has also been improved, and you will be surprised at the difference in the comfortable start.

Setting the carburetor and injector is essential for installation. After the carburetor and injector are installed, the power of the carburetor and injector can be experienced, but there are also Merit and Demerit.

Merit to be replaced by Power Filter
[Merit1] Power up The shorter the intake pipe is and the rougher the filter is, the more air resistance can be reduced by replacing it with an air cleaner. 。 Most OEM filters that use filter paper, etc., have low airflow per area and large intake resistance, whereas the mesh Power Filter has much lower intake resistance. 。 When the intake resistance is reduced, the negative pressure resistance when the piston is lowered during the engine intake process is also reduced, so both power and response can be increased. 。 The higher the RPM, the more air intake per hour, the larger the benefit will be, and as long as the fuel condition is well controlled, the power can be increased by replacing the power filter. 。

[Merit2 Sound change The Merit of replacing with the Power Filter is that the intake sound becomes easier to hear. 。 Normal air cleaner box is designed to reduce intake noise, so intake noise is barely audible 。 The bare power filter directly emits the sound of the engine intake, and this alone creates a sporty atmosphere. 。

[Merit3 Space-saving By eliminating the air cleaner box, which occupies a large volume of space in the motorcycle, the available space can be effectively utilized. In addition, it contributes to weight reduction. 。 Mopeds with less loading Space can increase their loading capacity, albeit slightly, by installing an Accessory Case! 。

It seems to be a Power Filter full of good things, but there is also this Demerit.

Power Filter Demerit

[Demerit1] When replacing the noisy Power Filter, not only the intake sound but also the blasting sound of the Engine and even the Mechanical Noise can be heard.
The air cleaner also serves as a silencer, and replacing it with a power filter will significantly reduce the silencing performance of the intake system, etc., so when the RPM is increased, the noise may be greater than the exhaust noise. 。 I like it (laughs).

[Demerit2] Low-speed Torque becomes thinner and harder to ride. 。 The Power Filter and direct carburetor certainly increase power by reducing intake resistance, but precisely this is only the result of the TorqueBand shifting to a higher RPM side. Therefore, the starting acceleration may seem weak, or the TorqueBand may lack the feeling of Torque when the Throttle is slightly opened, and the motorcycle may become difficult to handle.

[Demerit3] If the Power Filter has a nipple to install the blowby hose, there is no problem if the hose can be inserted there. However, it is illegal to release the blowby gas discharged from the engine to the large airflow because there is no installation point for a blowby hose. 。 Blowby gas is sucked out by the negative pressure of the intake air and is discharged because the replacement of the Power Filter or opening of the large air intake does not provide enough negative pressure as the OEMAir cleaner box does, and blowby gas cannot be sucked out as efficiently, The increase in the internal pressure of the engine crankcase prevents the piston from moving, resulting in power loss. 。 While replacing with a power filter will increase power by reducing intake resistance, it may also cause power loss by reducing blowby gas discharge efficiency.

Based on Merit and Demerit, I purchased KIJIMA's Power Filter this time, and it is not bad relatively speaking. In a word... it runs well (with Carburetor setting).

good point
◎Filter capacity, well treated joints, and durable performance.

◎Cheaper than K&N.

After Fire will not appear.

A bad point
◎ Cannot be used on rainy days. →Because it absorbs water.

◎Intake noise became annoying.

◎Carburetor setting is required.

◎Engine characteristics become closer to high rpm. →If I say that it has come to revolve, it does (laughs).

◎Cleaning will be necessary for the blisters.

Some people do not have the Merit to install the Power Filter from Demerit, but it depends on how you use it and the form you want to use it in.
The purpose is to set the intake and exhaust to match the current running conditions. 。 In such cases, we think the Power Filter is a logical part. View detail

KIJIMA

25 Sep 2023

Air Cleaner

Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2

Japanese Webike user

4/5

Cancellation.

I asked for it this morning and it is safely Cancelled. View detail

KIJIMA

07 Aug 2023

Air Cleaner

Fits: その他

Japanese Webike user

4/5

Asymmetric shape is good

[How is it used?
NSR250R (MC21) I was looking for an air cleaner that matches the size of the TA22Carburetor (54mm).
The OEM air cleaner box was originally missing, so I would have preferred the OEM one, but I chose this one because used parts are very expensive and I basically don't ride in the rain.

Was the one you received as per Image?
It was just like the picture.

Was the installation difficult?
The TA22carburetor is so close between cylinders that a regular cylindrical one would interfere.
This product could be installed thanks to its Oval and One Side joint.
Installation is instantaneous as all you have to do is tighten the band.
I was a little concerned about the loose insertion before tightening the band, but once the band is tightened, it is firmly secured.

How was your experience with it?
NSR250R for Package (up to 89) but MC21 (90) But there was no problem.
It is a mystery why Carburetor is almost the same, but it is compatible up to 89. Is it because the shape of the air cleaner box changes and it is not confirmed yet? I think it is because the shape of the air cleaner box changes and has not been confirmed.
There was no particular interference with the Fuel Tank or Others components.
It is universal, but as stated in the Package, it seems to fit NSR250R/NS250/CB750F/CB900F/GSX1100S.

[Included Parts:were they on?
The tightening Bandetc. is also included in the package.
As long as you have a Driver, you can install it.

[Was there anything that disappointed you?
Not particularly

【Review】
The asymmetric shape is good for TA22.
It is difficult to say what the compatibility information is, but I am satisfied because it is cheaper than buying a used air cleaner box and filter. View detail

Power Filter (Compatible with Blowby gas circulation)

KIJIMA

27 Feb 2022

Air Cleaner

Japanese Webike user

4/5

KIJIMA KIJIMA Air cleaner

Used for NSR50.
Installation is not difficult and easy.
The air cleaner is considerably smaller than the OEM air cleaner, making it easier to maintain. View detail

KIJIMA

13 Feb 2021

Power Filter

Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200

Japanese Webike user

5/5

Parts that can bring out the performance of OEMcarburetor.

I use it on my SR400 and was thinking of going with the FCR Carburetor Body or CRcarburetor but wanted to try it out first.
The caveat is that you have to buy the Joint separately.
Main is stable at 175.

good point
Torque up is quite a bit.
While reducing the intake resistance, it also blocks harmful substances such as garbage from entering the engine.
The low price makes it easy to use Repeat.

A bad point
You can't use it on rainy days because it absorbs water.
If the carburetor setting is not set properly, the performance will not increase but decrease.

It takes a lot of time and effort, but the results are worth the effort.
It's good for people like me who still want to see the potential of the OEMcarburetor. View detail

KIJIMA

12 Feb 2020

Power Filter (Compatible with Blowby gas circulation)

Fits: YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200

Japan User(translated)

3/5

You'll want to create a Bracket separately

I've admired the word "powerful" since I was in high school It seemed so fast
But when I became a Large person, I heard that I'm not good in the rain or something like that So I was a bit hesitant to become a Large person
Eventually I forgot about Powerful and before I knew it I was this old That's me

This is what I put on my TW200

The Power Filter can capture more air than the OEM filters Theoretically, the explosion in the Engine will be large, and the Speed and Power will be reduced to This is one of the recommended intake and exhaust parts for those who want to raise it, but it has a weakness:it is vulnerable to water
That's right There's a carburetor at the end of this Filter, and beyond that is Engine
Goodbye to the air cleaner box that says OEM and goodbye to masala town!
If water enters the engine, some kind of malfunction can't be avoided

This product is a perfect example of the fate of POWERFUL, but I'm not sure I'm ready for the rainy season It was a grueling run
But it's about a 20-minute commute to work
In conclusion, we were able to afford it That is the first thing I will tell you But I don't know more than that

Installation
It's a car model Exclusive Design, so it came with no problems
You can buy a Universal, but if you have a dedicated one, you should buy a dedicated one Recommendation Don't do anything you don't want to do It is a family motto

There is only one problem, there is no bracket to hold the PowerfulBody in place
So it's just supported by the connection to the carburetor and the FilterBody is robustly gravity driven
I hope it's stopped, but if it's running, it's probably bran bran bran rocking, so I'll be honest, I'll connect it I am concerned about the degradation rate of rubber materials

And it's mentally tough to run with the possibility of breaking and dropping it at any moment I used Tie Wrap to hang it moderately from the Frame
But it's not cool, so I'm going to have to buy a Bracket from Homsen to fix it up Recommendation

In general, it's neither good nor bad It's just plain POWERFUL
View detail

KIJIMA

11 Oct 2013

Power Filter (Compatible with Blowby gas circulation)

Fits: YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200

Japan User(translated)

4/5

Since it was disagreeable to have attached a Breather filter, here [ Blowby-gas circulation type ] was purchased.Appearance is also settled shapely, without an Engine becoming dirty from blow off of the Oil from a Breather filter.Since attachment and remo