Reviews
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA REBEL500, HONDA REBEL250
Cospar good
REBEL250 (mc49) The mileage of the engine is 13,000km… I bought it in the faint hope that it would increase the intake efficiency and power up the engine a little. It's easy to replace the engine oil because all you have to do is remove the 3 plus screws. I think the effect is that the airflow is a little better. The price is the same as the OEM product, so I recommend it. View detail
Fits: HONDA XR250MOTARD, HONDA XR250, HONDA XR400MOTARD(Exclusive with Gauge) 05-08
Cool!
I don't know the effect, but it looks lighter than OEM and looks like it would have less resistance to suction. View detail
Water intrusion
I asked my favorite Motorcycle shop about this Air cleaner, but be careful because depending on the angle of the rain, water may enter the Engine!
and ad vise!
It looks like there was actually a Case that broke down because of it.
It would be nice if it didn't rain where you park, but be careful.
If possible, I would like to see Manufacturer take measures in this area!
I'm happy with it for normal running.
View detail
I only want Harness.
MONKEYJB03's Temperature SensorHarness (Extension) I wanted to buy only one, but there is no such sale, so I bought this product.
I think it's because Harness alone is not good for business.
I know I had no choice, but I would have preferred to sell it as a Single Body if possible.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF
Reliable quality.
When I replaced it with a uniFilter, the intake noise was too loud. This is cheap and very quiet, whether coarse or fine. I can hear the navigation sound even at full throttle. View detail
Fits: HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i Special (SCOOPY CREA i SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart・Dio DX, HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO), HONDA ZOOMER (ZOOMER)
Engine is happy.
I hadn't replaced it in about 15 years, so the Engine seems to be happy and starts up with a single Cell. View detail
Fits: HONDA CBR 1000 F, HONDA CBR 1000 F, HONDA CBR 1000 F
CBR750 (1987) Available for
Although the model is listed as CBR1000, it can be installed on CBR750. View detail
OEM Compatible Filter
Air filters for mopeds, especially filters for slightly older 2-stroke models, are generally made of urethane foam.
This sponge filter deteriorates due to the gasoline component of the blowback, resulting in a terrible condition like that of the STELLA.
This time, I prepared it for the carburetorOH of JOG remote control, which had been neglected for a while.
I worked on it and found that it was still torn up in the air cleaner box, so I quickly replaced it.
Size was also generally usable without any problems.
The difference from OEM is that engine oil and filter oil must be applied since the oil is not soaked into the engine.
In my case, I put about 5cc of engine oil on FilterSponge, put it in a Vinyl bag, and spread it around as if holding it. I applied the oil by squeezing the Vinyl bag and spreading it around.
Too much will cause resistance, too little will reduce the ability to filter sand dust.....................
If you are concerned about it, place it on the ground between sheets of newspaper and step on it after applying it. The newspaper will absorb the excess oil and become a good ambai.
If Oil was applied in the right amount, it would be 5 stars.
View detail
Fits: YAMAHA gear, YAMAHA box, YAMAHA Box, YAMAHA NEWS GEAR, YAMAHA GEAR
Purchased for Yamaha VOX50 maintenance
I bought it to replace all consumable parts including filter and Oiletc. because I got it from an acquaintance. I was able to purchase all the parts at once, so the motor runs smoothly and smoothly. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF
Easy to install with excellent cost performance ◎
■ Product features
This is a Type product that replaces the air filter in the OEM air cleaner box.
The OEM Air Filter is a paper type, but this product is a mesh type, so the air permeability of the material itself is high.
The filter area is also quite large, so the air in the air cleaner box will be almost at maximum efficiency.
■ About installation
If you only need to remove and install this product, you do not need to remove the Cowl because you can remove the Cover by inserting your hand through the gap in the Front and turning the Screw.
However, if you want to replace or remove the Air ductHose, you would need to remove the Left Side Cowl.
About ■Filter
The filter has a rough and fine filter, but we use the fine filter because we do not have a Merit that uses Sugar Crystal due to the suction resistance inside and outside the box, as described below.
I'm going to go a little off topic, but I think it is important, so I will briefly describe my findings.
We hope this will be helpful to those who are purchasing.
■About suction resistance
By installing this product, the resistance caused by the air filter when passing from the cover of the box to the box body can be reduced, and the change in the material of the filter and the increase in the area of the filter aim to increase the air passage rate through the filter. The air filter is designed to be more efficient in passing air through the filter.
However, in the case of the Grom, it is not the resistance of the Air Filter that is the problem for increasing suction volume, but the resistance of the Air DuctHose that sucks air into the box and the inside diameter of the Intake Pipe that sends air to the Throttle body that is the Neck. If the resistance of these parts is not reduced or the bore diameter is not widened, the improvement in suction volume cannot be achieved.
Suction Duct to Air cleaner
The Large Diameter Air DuctHose is a third-party product that is marketed by removing the OEMHose, modifying it to widen the bore, and installing the Hose. Personally, I have been resisting the idea of installing a Hose in the first place, and I don't think it is necessary in the first place, so I have removed the OEM Hose and am using it. The direction of intake is changed, but from the position of the box, I think it is better to inhale from the top because the suction temperature is lower. "Ngooooo." and sound, but the volume is not so loud that it can be heard by those around him, and if he does not mind, he can remove it.
Intake Pipe from Air cleaner to Slovo
The InnerIntake Pipe inside the box, or InnerIntake Pipe as it is called, can be disconnected from the HRC Grom due to a regulation revision a few years ago. Removing this connection shortens the length of the hose and improves the suction resistance from the inside of the box to the throttle body a little.
Looking at the Net article, I see that some people have put a RACINGFunnel here, but in my personal opinion, I think that adding a funnel looks beautiful, but has little effect on performance.
Adding a funnel narrows the entrance diameter by the amount of funnel, so even if you have reduced the resistance, you may have to increase the resistance again.
■Precautions for installation
OEM filters are installed in a way that they fit inside the box, but this product is sandwiched between the body of the box and the cover, so the outer diameter of the box is larger and the capacity itself is increased. Therefore, please be careful if you have replaced the Horn with a third party product, as it may get stuck.
Also, removing the Duct and Hose above will improve the Torque depression above 6500 RPM a little, but Response at low RPM will be just a little worse.
Also, if this is done with the OEM exhaust system, the air cleaner may sometimes make a banging sound when blowing back, so it is recommended to properly balance the intake and exhaust air (i.e., replace the exhaust system).
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
I see what you mean by OEM margin.
I was attracted to the big Air Filter, a bit like Mushroom, but I decided to try it first to see the effect.
Installation is very easy.
The effect was, oops, a responsive improvement that could be felt.
You can feel the increased thickness in the Torque, especially at medium and low speeds.
It seems that the OEMs are purifying the air with specifications that take into account the traffic environment not only in Japan but also in other countries, or perhaps the intake efficiency was considerably low.
On the other hand, this Filter has two types, but the coarser one is called Quantity:It seems to be much more efficient, perhaps due in part to the fact that it has been Set.
For those who are still struggling with the 125cc MONKEY, we recommend this easy-to-use custom items.
View detail
Fits: KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI GPZ400R, KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI Zr-7., KAWASAKI Zr-7.
Large satisfied
I think it's the best value for money, about half the price with the same level of quality as OEM products. View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
under the influence of price
I bought it because the price was low.
It is a consumable item, so I am very grateful that you sell it at such a reasonable price.
View detail
ใส่แล้วสวยเลย เข้ากับรถมาก งานแพ็คเกจดี สมราคา View detail
The best zero resistance filter for a stock box
Bolts directly onto the larger 34mm throttle body for a clean look
About quality and texture, I can confirm that the quality is great and that the materials used is cotton gauze for the filter material, surrounded with a stainless steel mesh and rubber mounting base. About the feeling of use, Bolts directly onto the larger 34mm throttle body for a clean look and improves top end performance. Products to buy together, While looks and performance are improved over the original Honda setup the ability to use the bike in all types of weather is not. Adding a water proof covering would be ideal to also add to your cart to overcome this negitive aspect. Difficulty of installation, I can say the fitment of the round taper air filter for my installation was easy due to the ease of access and simple nature of securing the air filter directly to the throttle body with the included band clamp. Cost performance and comparison with other products, The pricing of this product is great, much cheaper then specific air filter kits for the Grom that are available from the other brands. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR)
Not so different from OEM Product
OEM Product is expensive, so it is a Repeat.
I have no problems with it.
View detail
Genuine HiFlo Oil Filter for GSX 750 2005
My friends GSX 750 2005 was in need a bit of a service. The oil filter definitely needed changing out as it had been a while since the last service. The bike ran ok, but not to the best of it's ability and I did not feel right not changing it. Anyway, with a few other parts for this project, all my order was shipped via EMS and arrived in great condition in 5 days. HiFlo oil filters have been around for years and if memory serves me correctly, a lot of the big manufacturers use these branded in their own name. So, solid choice usng a HiFlo. These filters have a great life span and are pretty cheap. Yes, you can get more expensive ones, but for a bike this old and how often it would be ridden would be a waste. I have used HiFlo for a long time and they have never let me down. The quality is awesome, the threads are always spot on and no bad incidents fitting. No problems at all with them. The old filter was a little tricky to remove due to age so needed a little persuasion. After it came off the new filter was a breeze to fit. Filled with oil and the bike purrs like a kitten and has a good flow of oil. Thank you Webike. View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Pretty cool.
It is a bit pricey,
cool
View detail
Discontinued and used here
Cut to the same Size to make and use. View detail