Reviews
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
To APE with PD22 installed!
Used for Engine of APE100YOSHIMURA115carburetorPD22
Considering the sudden rain, I thought I'd stay dry.
If you're looking for a Filter with a 45 degree bend, this will work!
I used three Nitrile rubber O-rings of slightly larger inner diameter in the carburetor as spacers and Exactly
With this, I was able to install the Side coverSmall and the heat shield between the carburetor and the Filter to prevent rain!
View detail
Air cleaner with cover
Installed on pc20, which was a direct carburetor
It looks like the parts have been replaced with Balibali's Plating.
Large durable in sudden rain with all-weather cover (LargeIf it rains, I'm worried.)
Inhalation sound is the level of not to be bothered thanks to the cover. (I've been a direct carburetor until now.)
Although there is the ease of getting out of the setting of Pc20, I was able to get out of the setting without any difficulty.
Durability is … well, it's a regular replacement, so it's probably enough in this price range.
I heard that the Screws will come off after a while of driving, so I'll use Bond to harden them.
View detail
Instead of an OEM Product!
I got the DAX from a friend of mine, and this is a big 88cc with a Bore up It was a cab air funnelSpec It was cool enough as it was... but I still like the OEM look decided to replace the carburetor with a PC20 and replace it with this air filter!
The airfuel itself is fine, as is the detail in other people's Impressions It's just fine! It's cheap! LOL!
Once you put it on, you don't have to worry about the details! expected to be
I thought it would be easy to put the Air Filter for DAX on the DAX! is PC20.... It wasn't so easy to get the carburetor side of PC20 size I added KITACO's Joint funnel to adjust the size of it and then I was able to get a better fit The Air FilterBody managed to install with a bracket
It came on like that, but it's pretty fluffy lol
But it looks like it, so let's call it good! Because it's cheap lol
The performance itself How is it? As far as the performance of the Filter is concerned? There are a lot of parts of it that are...cheap, lol
It needs some work to install, and I don't think it's number one in terms of performance, but It's okay.. It's okay! It's cheap!
I can't recommend it to complete beginners, but I'm sure you'll find a way to make it work If you like things to be attached, you should try it
View detail
I can't install it
The position of the Bracket to the Frame is not right at all
Also, the intake is in a bad position and obviously not going to work
It's going to be just a decoration
View detail
It's cost effective compared to OEMs
The OEM product is too expensive to buy, so we can't afford this Universal Buy Product
The surface paint and details are crude, but it's cheap, so it makes sense
View detail
Installation Now in use.
Although it is in use right now after installation it is inconvenient etc. etc. There is none. It was also easy to install and could be installed immediately.
I would like to purchase again.
View detail
Driving Improvement of GYROUP
【What made you decide the purchase?】 Required
As a result of investigating to improve the running performance of GYROUP, I decided to try Tune of the intake system. We searched items by Wye Big and gathered information and chose from the Power Filter with Cover that can be used without problems even in the rain with an easy price and Minimoto.
【How was it actually used?】 Required
With NORMAL it was accelerating that I could not accelerate on a slightly ascending slope, so I got to be able to run comfortably. However, - Resistance changes, so we are also implementing carburetor's Main jetSetting and Weight Roller's setting.
Carburetor setting MJ changed to # 75 for OEM # 65
Weight Roller changed to 8 g x 6 for OEM 11 g x 6
【Was it difficult to install? (Hard parts case)】 Any
It was harder than I thought it would fit in Carburetor, but I think that anyone who can remove OEM's Air cleaner set from Motorcycle is a problem.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
Initially it gently inserts obliquely, and while turning it a little, I entered it by pushing hard with a lot.
[Is there anything I was disappointed about?] Required
It was a product as expected. There is no particular problem.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
Because it is an invisible Parts, it does not matter if it is not a Shiningly Plating.
【Have you compared items?】 Required
KITACO - DAYTONA - KN Planning - Hiroo etc..
[Others] Any
Tune of inspiration type is easy, but just changing OEM's Air cleaner to Power Filter will make Gas thinner Setting. We recommend setting at least carbettor's Jet only.
View detail
Mounting not
The one of the most standard Type arrived like the picture but the position of the Bracket in the attachment part with the Body is weird or the position of the suction Pipe can not fit in the fixed position properly.
It seems that there is no choice but to give up as it is not Gap that can be done with some processing ....
View detail