Reviews
Confirm delivery date.
Shipment was around 3 days, but it's out of stock and will take over a month. Check the delivery date. View detail
delivery confirmation required
Shipping is around 3 days, but the product is out of stock and it takes more than a month. Check the delivery date. View detail
Could not be installed.
I tried to install it on my 1997 YZF1000R 4SV, but the inner wire on the side that opens the Axel was too short to install...
The one with the bent tip in the second photo is the Throttle Cable removed from the car body.
I worked on it believing it to be a product with webike's conformity guarantee, but in the end I could not replace it...
View detail
Fits: HONDA CB400SF, HONDA CB400 SF Ver.S -98, HONDA CB400 SF Ver.R -98, HONDA CB400SF
Shorter than OEM and unusable.
Same length as OEM, but shorter and less useful View detail
This is a lousy product. DR-Z400SM users should not purchase this product.
I purchased one for my DR-Z400SM.
I bought it because it is a Stainless Mesh case with good parenthesis, and although it is expensive, it is made in Japan, but the shape is totally different from the OEM Throttle case.
The WireGuide did not fit into the case at first, so I had to shave the part where it hit the case with a Belt Thunder in several places and managed to get it in. The Throttle tube was caught and the Axel could not turn.
On the carburetor side, the angle of the Pull Side Guide was more bent than the OEM, so we put it in a vise to make the angle shallower and the angle the same as the OEM.
Although we managed to turn Axel by processing it, we decided not to use this Accelerator Wire because we were worried about it.
Even a cheap, no-name Chinese Throttle Cable is at a level where it can be used by simply popping it in, but it is unusable without considerable modification.
It also took about 3 weeks to arrive and I was looking forward to it, but I feel like I threw away a lot of time and Gold.
I will never buy another product from this Manufacturer.
Oh, only the length was the same as OEM, lol.
View detail
Fits: YAMAHA SR400, YAMAHA SR400 88-00 Barnett accelerator holder
It didn't fit.
Does not fit the '00 2 SR400. Disappointed as I seem to have thrown away time and Gold. View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z1-R/Z1-RII
late (e.g. "late at night")
Delivery is very slow, do something about it. View detail
It didn't work.
I bought this Reverse Side for my CBR250R (MC41, 2011) at the same time as the pull/return, but this Reverse Side is different from the OEM and does not work.
The screw diameter on the Throttle side is so small that it is completely useless.
Why is this for a CBR250R (MC41)? I have no idea.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400
I couldn't pimp it
While acknowledging the lack of confirmation ….
The handlebar side plate shape was different, so it could not be popped on, so it was reshaped and reattached using Drill and Disc Grinder.
Well, I guess this is what Universal Product is all about.
View detail
Fits: SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400 SM, SUZUKI DR-Z400 S, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400 SM, SUZUKI DR-Z400 S
Although the object for DR-Z was purchased, the die length of the metal fittings (banana) attached to the axel side was different, and the degree of setting angle had bent. It is safer for deleting by a file grinder etc. to have needed to be processed
Although the object for DR-Z was purchased, the die length of the metal fittings (banana) attached to the axel side was different, and the degree of setting angle had bent.
It is safer for deleting by a file grinder etc. to have needed to be processed, and to purchase an original manufacturer's product, since it cannot attach as it is.
View detail
It is the worst. Do not buy.
I resent it. As it turns out, it did not come with it. However, I could not return the product because it had been over a month since I purchased it, and there was no contact or location information on the product to contact the manufacturer. Specifically, the Gold part of the Wire did not fit into the Throttle holder because the dimensions of the Throttle holder side were not correct. When I moved the Axel, I felt a bad rubbing sensation, so I gave up the installation. View detail
goods Throttle Wire
I'm going to stop being a member. View detail
Are you sure that's the length shown?
I bought this product of 100mm long because the accelerator wire was stretched to the limit by 30mm up of the handlebar and it seemed to apply unreasonable force.
Long enough to reach Light's Lens when I replace it!
When you line up the OEMs, it looks to be about 150mm long. Definitely not 100mmLong.
It is ugly because it draws a large Loop in front of the eyes even if it is disagreeable because it is not possible to make a Route to turn other because the space that the space that Cable passes through is Limit in Motorcycle VTR250, and it associates with the antennae of the cockroach.
Longer is probably safer, but you're looking at too much leeway.
I'd like to return it, but there's nothing else I can do to change it, so I'll just cry myself to sleep.
View detail
ProductCancellation
I have placed an order, but the delivery date is too late, so please Cancel. View detail
At least update the estimated delivery date.
How long do I have to wait for it to come? It's already been over 3 months since it was supposed to come in?
Come on, that's enough.
You haven't heard from them, and they don't plan to come in?
View detail
What kind of parts take that long to deliver?
I haven't received it at all, what's going on? I've never heard of such a long wait, it's already been two months since the November 30 shipping date. ・・・・・・ I wonder if the parts are so bad that we don't even know the new estimated shipping date. I'm sure it won't come even if I wait 6 months. View detail
Isn't it too late for that?
I ordered on November 4, 2020 and it was supposed to arrive on November 30, 2020, but it hasn't even arrived yet. Are there that many orders concentrated and delayed during the winter season? Did they forget about me? I'm in Hokkaido, so I'm not in a hurry, but isn't that rude to people who are in a hurry, Manufacturer? View detail
Throttle cable do not fit with my SR400
this DAYTONA Long Throttle Cable cannot fit into my sr400 because the end of the cable cannot fit into its place ( to large to fit into the cable holes). Can you suggest or recommend what cable i should buy?. View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
Thailand is Small
Thailand is Small.
When I checked it when I felt something wrong with Throttle while driving, Thailand was out of carburetor.
Thailand is Small so Thailand Ko is playing in the place fixing the Thailand co on the carburetor side and its part has been deformed.
It is about 1 mm in dimension. I think that it is a large error for such industrial products.
Although it became slightly concerned at the time of installation, I felt that Large was durable
View detail
Fits: YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
since die length is not known unless it is clearly short as compared with an original manufacturer's product and opens, returned goods are not made, either -- the minimum -- they are the worst goods.
since die length is not known unless it is clearly short as compared with an original manufacturer's product and opens, returned goods are not made, either -- the minimum -- they are the worst goods. View detail