Reviews
I used it on my GPZ900R.
I bought this for High SoloWirefor replacement on my GPZ900R. I have been using StainlessBracket for a long time, but I bought StainlessBracket again because it is less likely to rust. The price is higher than before, so I give it 4 stars. View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX
HURRICANE 10cmLong throttle cable
Long cable was replaced when the handlebar was replaced.
Handlebar is HURRICANE's POLICE2 type with 27mm up set up holder compared to NORMAL.
OEMCable was not enough, so we decided to use a 10 cm long cable.
I think it fits nicely without being too long.
The replacement was done by one person, without removing the carburetor, so it took more than 30 minutes to hook up the new roll of Cable,
The return Cable did not take that long, but it was a struggle.
View detail
HURRICANE LongThrottle Wire GPZ900R
I received the product immediately after purchase and am very satisfied with it.
I'm sorry
View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
If Wire were a little longer, it would be GOOD.
GSX-R750 (GR77C 89K) The OEM Product is no longer in production, so it's a big help to have a reproduct like this.
However, due to the short wire length, there is almost no play in the throttle even when the adjuster is fully tightened. It would be best if the wire length were 2~3mm longer to allow for more adjustment!
View detail
HURRICANESlot cable
I purchased this one because OEM Parts has been discontinued.
Brand strength and no quality issues at all.
Replacement requires time since the carburetor needs to be removed and installed.
View detail
Replacement for Steel wire
SteelWire is no longer working properly, so we replaced it with this product instead of cleaning it.
I tried to install it without lubrication because it is a rust-free stainless steel wire, and it was perfectly smooth without any problem at all.
I went touring once without lubrication and the throttle operation was very smooth.
It was satisfactory enough, but when I lubricated it with Wire oil to try it out, it was even lighter.
It is so light that I am considering strengthening the return spring (including the expectation of a quicker return).
It was installed on a GSX1100S (carburetor is YOSHIMURATMR). Originally it had a 90cm wire but it was Tight to handle.
This time, we purchased a 110cm one in order to make the handling as gradual as possible (less resistance).
I feel that the 100 cm ones are fine.
I'll give it 4 stars because the company has a higher-end (?) product with a mesh outer tube. I will give it up to 4 stars because there is a higher-end product with a mesh outer tube.
View detail
Texture GOOD!
I bought this for my XJR1300C High Solo.
Two Quantity because two pulls and two returns are required.:You need to purchase Set.
XJR appears to be 1050mm, as noted in Active's table.
The reason why I buy Rose is because the plating wire rusts quickly if it is a car-specific kit.
So from the beginning, StainlessSpec. was the way to go.
After purchasing Kit, I buy it in bulk because buying Wire is expensive and it is a waste of Wire.
View detail
Bar handle conversion
Used to convert HURRICANE to bar handle with Kawasaki holder kit.
5 cm is better.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R, KAWASAKI Z1000MkII, KAWASAKI Z1000LTD, KAWASAKI Z2 (750 RS), Others Universal, KAWASAKI Z750FX, KAWASAKI Z2 (Z750 FOUR)
It is recommended
Throttle is lightened.
Resin Grip, Wire Lubrication before use, Proper Wire routing, Low Rate Return Spring and Quantity:If used in a Set, it is effective.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R, KAWASAKI Z1000MkII, KAWASAKI Z1000LTD, KAWASAKI Z2 (750 RS), Others Universal, KAWASAKI Z750FX, KAWASAKI Z2 (Z750 FOUR)
ULF
The same Throttle Wire with different lengths was used before. This time, we replaced it with a 10 cm longer wire in order to change the wire's routing, aiming for even lower friction. The effect was the same as before, but the change in the wire handling was extremely large, and the Axel suddenly became much lighter. I can't wait to experience it on the long touring. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R, KAWASAKI Z1000MkII, KAWASAKI Z1000LTD, KAWASAKI Z2 (Z750 FOUR), KAWASAKI Z2 (750 RS), KAWASAKI Z750FX, Others Universal
Throttle lightened.
I heard that Mameshiba-san passed away, and I chose this as a memorial service.
Replaced from Active's Wire and lighter.
The carburetor is a CR4 series.
I am satisfied about the lightness.
Minus one star for the fact that the part to be removed from the throttle holder is not Stainless Steel.
View detail
Stainless Steel is good
If you buy the high throttle set, the adjustment part of the accelerator wire is made of steel, so I bought this one made of Stainless Steel. View detail
Fits: HONDA SUPER CUB C90, HONDA SUPER CUB C70, HONDA SUPER CUB C50
usually
[How is it used?
To replace Throttle Cable
Was the one you received as per Image?
Yes
Was the installation difficult?
Cable crawling is troublesome.
How was your experience with it?
no problem
[Included Parts:were they on?
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA BRONCO, YAMAHA SEROW225, YAMAHA SEROW225
It's a lot lighter!
[How is it used?
SEROW225 (1KH) Used for
I was thinking that the clutch was too heavy for its age, so I decided to renew the cable as well as the maintenance around the throttle.
It is a little Longer than OEM, but OEM Product was a little expensive, so we chose this one.
Was the one you received as per Image?
It was just like the Image, just a little longer than OEM.
Was the installation difficult?
The work is a little bit more complicated than with a clutch cable, because you have to disassemble the throttle and remove the tank.
Since the Cable is 1 pc, the Quantity:I think it is easier than 2pcType. I think anyone can do it as long as they check the current status.
How was your experience with it?
I didn't feel that much when I replaced the clutch cable, but the Throttle Cable has made a noticeable difference! I didn't have to be so careful when handling the cable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Well Good
Part Number:HB6858, Part Number:0605-KE3-TS Part Number:HB6859 If you purchase a total of 3 products together, you can install them on z900rs. The existing throttle cable can also be used, but it keeps the parts that you don't want to see clearly. There is no option for performance to decline or increase. View detail
Fits: KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR)
Cost-effective
While OEM parts are reliable, many of them are quite expensive, but NTB's products are reliable because of their reasonable prices and high quality.
It is expected that OEM parts for old cars will be discontinued in the future, but it is helpful that there are manufacturers that sell this type of replacement parts.
View detail
![[Big carburetor kitReplacement Parts] Throttle Cable](https://global.webike-cdn.net/photo/impression/1d/1d0a46633f7965ea27762b36525f5169L.jpg)
Fits: HONDA NS-1, HONDA NSR50, YAMAHA TZR50
Replaced with Carburetor replacement
Used for NS-1 MikuniVM20-246.
Since it is a non-fueled condition, each person should prepare his/her own Grease.
One side of Lock nut is awfully long, so it would be nice if it were a little shorter.
It is an L-shape, but it normally interferes with the Helmet in, so we plan to cut the Gold part of the L-shape, cut the Helmet in, or float it.
View detail
The cygnus X FI 09 Taiwan sporty was attached and used. Although the die length of the pure cable was insufficient for the long wheel base, it was canceled with this product. It is recommended!
The cygnus X FI 09 Taiwan sporty was attached and used.
Although the die length of the pure cable was insufficient for the long wheel base, it was canceled with this product.
It is recommended!
View detail
I want it to be a High Throttle Kit.
High Throttle KitIncluded Parts:Nickel plated wire is said to be prone to rust, so I purchased this product made of SUS additionally from the beginning.
I compared the plated product with the SUS one, and it looks more luxurious and better looking than the glaringly shiny Nickel plating.
When installing the Nut on the carburetor side of the ZEPHYR750, the Gold plate of the Bracket interferes with the Nut, so it was removed and shaved with a grinder.
View detail