Reviews
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
If it's old, it's worth replacing
This is a replacement from the original, and probably new car-installed product that came with it
The Wire movement itself didn't feel bad, but the RubberBoots are starting to crack Therefore, I decided to replace it
The wire that I removed is much more bent than the new one, and there is no wire fraying And it wasn't in good shape
But even after replacing it, the weight of the Throttle remains almost the same However, the Idling rpm went down and became stable After all, there was a snag
I'm glad I replaced it
View detail
KN Accelerator Cable Repair Kit
large mounting kit(6 different sizes-should fit) , two cables , all Packed in an aluminum can. great set, I am very happy View detail
Throttle cable do not fit with my SR400
this DAYTONA Long Throttle Cable cannot fit into my sr400 because the end of the cable cannot fit into its place ( to large to fit into the cable holes). Can you suggest or recommend what cable i should buy?. View detail
not quite
I used it on my MD16 and bought it because the OEM Pull Side is out of stock The angle of the Axel is 20mm longer than that of the Reverse Side I made various adjustments, but the return was not good and it was scary, so I reverted to the OEM which was about to run out of steam I know it depends on the model, but it's not suitable for the MD16, the height of the Handlebar If you Offset it, though, you might be able to use it View detail
The same as the OEM Product, so you can rest assured
It's been 2 years since the replacement and there are no problems
I think this is a quality product that is safe to use
OEM Products are no longer available
Thank you, NTB
(I also use Clutch Cable and Brake Pads from NTB.)
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R, KAWASAKI Z1000MkII, KAWASAKI Z1000LTD, KAWASAKI Z2 (Z750 FOUR), KAWASAKI Z2 (750 RS), KAWASAKI Z750FX, Others Universal
You're right, it's a bit light!
I replaced a competitor's Wire
I replaced the Wire a year ago, but I replaced it with the Mame Shiba Wire, which I was curious about
I was skeptical about it, but it sure is a lot lighter and I'm happy with it
Fast long distance touring will be a breeze!
It's just that the gold on the throttle holder is not plating, it's just that the gold on the throttle holder is not plating It would be great if they could make it Stainless Steel, but I guess it's a matter of Cost & hellip;
View detail
Satisfied
The one I used to use for High Solo became noticeably rusty, so I used this I bought the Stainless product
I can't judge the presence or absence of rust as it has been in use for a short period of time yet, but I'm happy with how it looks
View detail
Satisfied
Used on the ZrX-1200R
Because the one that came with the set when I put together the Active's high slot was not stainless steel I replaced it with a stainless steel one as the rust was noticeable after use I can't evaluate the rust and other factors because it's not been a while since I installed it, but I think it looks good and I'm happy with the way it looks It is
View detail
Speaking of High Solo, Active
It's a classic that goes without saying
It's a safe quality, and with High Solo, I wouldn't hesitate to choose Active
I think it will work even smoother if you lubricate the wire before installation
It would be nice to have more length variations in Universal
View detail
High Throttle Kit included wire ? ? ?
As everyone is commenting on, the throttle wire included in the Hiroshu kit really gets rusted! We will take care not to rust, but rust will still be on in a week! ? ? ? Cost performance is high, but I bought it carefully according to the handle exchange. Honda installed model ? Grom 2016 When it was Hurricane Forward Conch 2 type it was 800? It was good, but since it was replaced with SP Takegawa handle this time it changed to 900? Equivalent to genuine size. About 1 month has elapsed after installation change, but there is no occurrence of rust like last time. As the price of the Hiroshu kit can also fluctuate, I would like you to choose either option. View detail
A little disappointing
Although it was pointed out by others, when turning over the Rubber cover which is hanging on the play adjustment part of Center, when Cable is pulled, Cable has gone out of the caulking part. Quality problem of caulked part. Write it as a point of note or wish for a strengthening of the caulking part. View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
Thailand is Small
Thailand is Small.
When I checked it when I felt something wrong with Throttle while driving, Thailand was out of carburetor.
Thailand is Small so Thailand Ko is playing in the place fixing the Thailand co on the carburetor side and its part has been deformed.
It is about 1 mm in dimension. I think that it is a large error for such industrial products.
Although it became slightly concerned at the time of installation, I felt that Large was durable
View detail
Stainless's dull shine is good
Formerly TAPE 1, the Gold genus was Plating.
The new one is beautiful, but after 1 or 2 years it has been found that corrosion comes out on the surface and this is also noticeable, because it's on Handlebar (* ≧ ∀ ≦ *)
When polishing it with METALCompound, copper plating under Chrome plating can be seen and it is unnecessarily anxious, (≧ ∀ ≦)
It seemed that there was not any problem in Wire itself, but I replaced it, it is slightly expensive, but if it is Stainless, I do not have to worry about rusting.
View detail
Fits: HONDA SUPER CUB C90, HONDA SUPER CUB C70, HONDA SUPER CUB C50
I am satisfied.
Used for SUPER CUB 90Custom.
Replacing with this Wire probably the cheapest as OEM Product got crawled and the return got worse.
The handlebar around has been replaced by Made by HURRICANE 's Pipe Handlebar Kit, but in particular it fits Exactly without Length missing.
Once we lubricated and assembled, the return is also satisfying and satisfactory.
It is good feeling that firms such as Adjuster and Rubber cover making and Thailand part are also solid..
View detail
For the second Motorcycle
It is Repeat because I liked using it for the first Motorcycle.
The good part is that the gold part is Stainless Steel so it will not rust.
Because there is no extra thing of Adjuster in the middle of Wire, it is easy to handle.
The thing to watch out for is that the Earle part of the Gold tool is looser than the one of Plating of iron.
View detail
Is good.
93 year model XLR 250R MD22 PD79 CCarburetor stuck and it was troubled.
It improved considerably by exchange of Throttle Wire. Thank you.
View detail
GT50 (II type) Used in Restore - - - I am OK for it
Gold class exposed part of Throttle Cable of car body Original (Pipe part - Adjusting Screw Department -
Since the fixation gold tool) was rusted until it could not be recurrently, the thing that can be diverted is the color.
Similarly, ThrottleSingle Body's Holder's model, currently other company ProductCable is on sale for TZr
Because it was for RZ 50 of Long Tank, purchase it with Cable length.
I was wondering if I could afford a pong, but the tall fixture is tall, as it is to Holder
It will not hold down Cable - - -
So, as Spacer, wound Tying Band at hand, filling up the skimmer with the head of Tying Band
It became possible to do it by doing it.
Incidentally, as for the part to be inserted in Holder, since Rubber was thick, remove it, adjust the diameter with Self Fuser Tape
doing.
For now I am OK with this (Maybe you may put your own Spacer on your own).
However, since it is not in the original wearing state, please take self responsibility when referring.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R, KAWASAKI Z1000MkII, KAWASAKI Z1000LTD, KAWASAKI Z2 (750 RS), Others Universal, KAWASAKI Z750FX, KAWASAKI Z2 (Z750 FOUR)
very good.
FCR Carburetor Bodycarburetor 's Spring is heavy and changed to Low RateSpring and the Throttle Wire also changed together and it is light and surprised?
Long distance Touring will not bother me.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZEPHYR400
Exchange from OEM
I bought it to replace Handlebar.
Through changing from OEM, Throttle became lighter and I thought it was such a change.
If you are looking for a cheap Throttle Cable that is not on board yet How would you like to try it?.
View detail
Fits: YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR)
Exactly!!
I installed it in DRAGSTAR 250 VG 02 J.
Does Slot get lighter?
I bought a bar TEC 's Throttle wire in the Amazon, but the Screw on the return side wire is too big to enter and the pull side is thin and scarce ...
NTB products, products were more than expected.
View detail