Reviews
Fits: HONDA Ape 100, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
It is not OEMSize!
Throttle Wire disconnected while running!
OEM Product discontinued & out of stock
I was lucky to find it on Webike ….
Short length of Wire coming out of Outer tube
or
Longer Outer wrapping the Inner wire
Even with the shortest adjustment screw on the outer tube, it is still 5mm short!
The drums at both ends were of the same size and had no problem.
It has to be fixed with the Throttle turned.
Drilled a drum hole in the Throttle and managed to assemble it.
I couldn't turn my back on it, so I had no choice but to process it.
Too bad I was expecting a pimping.
View detail
Fits: HONDA CB400SF, HONDA CB400 SF Ver.S -98, HONDA CB400 SF Ver.R -98, HONDA CB400SF
Shorter than OEM and unusable.
Same length as OEM, but shorter and less useful View detail
Can be used as an inner cable.
It is important to measure the proper length and use a wire cutter with good cutting ability. View detail
Fits: YAMAHA SR400, YAMAHA SR400 88-00 Barnett accelerator holder
I didn't realize it was not available for OEMThrottle WireHolder.
I inadvertently bought the wrong one, so I decided to take the opportunity to purchase a Throttle WireHolder, which is a cleaner, external Throttle WireHolder. View detail
Fits: YAMAHA SR400, YAMAHA SR400 88-00 Barnett accelerator holder
It didn't fit.
Does not fit the '00 2 SR400. Disappointed as I seem to have thrown away time and Gold. View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II
Mesh
[How is it used?
Throttle Wire for new
How was your experience with it?
no problem
Installation is a bit of a hassle.
If you are not a self-starter, you should ask Shop for help.
Mesh color is a good Accent!
How did it compare to other products?
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
If you are replacing a pure product, this is the only way to go.
I like that the connection on the ThrottleGrip side is made of Gold genus.
Pure products are Material:It's Plastic, so it breaks easily at the slightest thing.
Made by Gold, so you can rest assured.
The inner surface of the tube is also treated internally, so the movement is smooth and it is a good product.
If you're looking to replace a pure product, this is the one to choose.
View detail
It was the structure which carried out the well just like pure. Large satisfaction!
It was the structure which carried out the well just like pure.
Large satisfaction!
View detail
Fits: SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400 SM, SUZUKI DR-Z400 S, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400 SM, SUZUKI DR-Z400 S
Although the object for DR-Z was purchased, the die length of the metal fittings (banana) attached to the axel side was different, and the degree of setting angle had bent. It is safer for deleting by a file grinder etc. to have needed to be processed
Although the object for DR-Z was purchased, the die length of the metal fittings (banana) attached to the axel side was different, and the degree of setting angle had bent.
It is safer for deleting by a file grinder etc. to have needed to be processed, and to purchase an original manufacturer's product, since it cannot attach as it is.
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1
ALCAN hands:Throttle WireJB013A-S
I've used things from many places, but after weighing the quality, Gold price, etc., this product is my favorite.
Some of the other company's products used some kind of tube, and the first movement was good, but the wire was so thin that a groove was made on the inside of the outer tube at the bend, and the throttle suddenly became difficult to return.
The wire here is thick, and there is length from Short to Long, too. (Especially for me, I'm happy to have 5?Short) I would recommend it if you are not particular about the OEM look.
As long as they continue to make the same products, I will continue to buy from them.
View detail
I'll never roll over …
When I was in high school, I used to play around with my GT50 as an OffSpec Throttle Wire died on the road, and I lost my Holder to my finger I have memories of wrapping it up, managing to get the Throttle operational, and finally getting home So when I get a raggedy body that I don't trust, I'll be the first to replace this one It's good now (?) It's a memory, but we still want to avoid that, so we're going to have to replace the body that's gone the distance Recommendation View detail
Fits: YAMAHA SR400, YAMAHA SR400 88-00 Barnett Accelerator Holder, YAMAHA SR400 88-00 Barnett Accelerator Holder
Buy with Barnett type accelerator holder for simultaneous exchange
It is not less than OEM Product's fabrication quality, and there is only a model exclusively for the car type and the Wire mounting part was satisfied with Large in that it was shaped like an angle like the OEM Product.
Length can be chosen from abundant Lineup, so it is also wonderful to be able to choose the one suitable for the vehicle!
Regarding durability, I think that Large big individual differences will come out due to frequency of use etc, so I will periodically carry out WireMaintenance and I will continue to pull my car so that it will last as long as possible.
Since we are considering exchanging all types of Wire to Mesh TypeWire in the future, I would like you to add a Mesh Type to this Barnett type Wire Lineup.
View detail
Price is higher than OEM
OEMCable of WR 250 R is less than 4000 yen at 5% discount, and this product is 5000 yen.
The difference is the thickness of Cable. This one is 1 Size thick.
Fat barClamp etc. Since it installed, OEM used this product because the Length was insufficient, but this product collapsed the other day and surroundings collided Throttle Resin part inside the throttle (Where it turned to L-Type) Because it was unavoidably broken and replaced.
Because it is the Other Company Product, we would like at least to make it cheaper than OEM. OEM is higher quality such as Waterproof structure of Adjuster.
Inside Axel, the internal wire rubs and feels gorgori, but it may get worn out as you use it.
I purchased it without the choice of Long wire, but I think that if you purchase other things you will buy that one.
View detail
In 1100 KATANA this is the only option other than OEM
OEMWire in Normal cab
There are only two choices of ALCAN hands.
Although the price stretches slightly,
Wire moves to Smooth more than OEM
It is smooth..
Moreover, it is domestically produced.
I was kept waiting for BackOrder for a while
There is only a thing suitable for the price.
View detail
As an alternative to OEM Parts Number
Because OEMCable is expensive, I bought this product.
Because it was Manufacturer who can not hear it, it was uneasy but can be used without problems.
Regarding durability, I am praying that it will not cut immediately although it is still unknown as it is still in use.
View detail
It distinguishes itself. I purchased it to match my meshed brake hose. I think it has good quality because it's a made in Japan product. It's difficult to place the wire nipple through to the carburetor side as I suppose it is when installing it to four c
It distinguishes itself. I purchased it to match my meshed brake hose. I think it has good quality because it's a made in Japan product. It's difficult to place the wire nipple through to the carburetor side as I suppose it is when installing it to four cylinders of other manufacturers. I had to use valve tools and a long minus driver to squeeze it through. View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Satisfied with a smooth motion, although die length was somewhat long.
Satisfied with a smooth motion, although die length was somewhat long. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard, HONDA Ape 100, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Although it was going to attach to the APE 50, when it was like which is not Big-carburetor correspondence and having been attached, it changed into the state where the Axel opened. The structure of the thing itself had improved.
Although it was going to attach to the APE 50, when it was like
which is not Big-carburetor correspondence and having been attached, it changed into the state where the Axel opened.
The structure of the
thing itself had improved.
View detail
Fits: SUZUKI Sky Wave 250, SUZUKI Sky Wave 400
Since the pure Axel Wire went out although mileage remarkable by the nature of its work every day every day called a delivery service by motorcycle was run, I adopted this product. Although pure lay price was somewhat high, since I heard that it was
Since the pure Axel Wire went out although mileage remarkable by the nature of its work every day every day called a delivery service by motorcycle was run, I adopted this product.
Although
pure lay price was somewhat high, since I heard that it was hard to go out and lasted long, it purchased.
I think that they are firm goods since there is no sign of going out although run about 10,000 km after this Wire change.
View detail
Fits: HONDA MONKEY [MONKEY] Big Carburetor, HONDA monkey
The Throttle wire was purchased for the specification from which the original carburetor cannot remove a Throttle wire, although he planned to have diverted. It is impressed very much that it can move with Sour Sour so few that the resistance at the time
The Throttle wire was purchased for the specification from which the original carburetor cannot remove a Throttle wire, although he planned to have diverted.
It is impressed very much that it can move with Sour Sour so few that the resistance at the time of pulling the
Wire is surprised.
View detail