Reviews
Cheaper than OEM, and if you're going to replace them anyway, it's safer to replace both.
When I removed the exterior to remove the engine head, I found that the slot cable was almost broken, so I thought about ordering OEM, but it would take a few days, so I ordered this product, which was in stock.
It arrived the next day, which made the work easier.
If you're going to replace it anyway, Quantities:We chose to replace both pcs because it is more efficient, safer, and cheaper than OEM!
I gave it 4 stars because it looks comparable in appearance, although I won't know how durable it will be until I use it for a few years.
I have my Handlebar up about 3 cm, but it went on with the same length as the OEM Product with no problem.
The OEM is painted black, but this product is plated, so I will have to try it out to see which is better for rust.
View detail
It is not OEM compatible.
It was Repair Parts for High Solo.
It is not OEM compatible.
View detail
CD125T, used during PE24carburetor device.
The Accelerator Wire was bent 90-degrees on the CD125T because it was too loose and hit the body. View detail
It was just fit.
KITACOHigh Solo installed decades ago.
For some reason, the length did not match, and it had been bothering me for a long time.
However, it was used as it was because it was handled in a way that felt right at the time.
I happened to be replacing the Clutch Cable this time, so I ordered it incidentally to save on shipping costs.
It is for KITACOHigh Solo, so I had no problem at all installing it and the length was EXACTLY the same.
Thanks to this, the Handlebar area is now Refreshing.
View detail
Can also be used with OEM Throttle holders
[How is it used?
Commuter vehicle, PetitLong touring
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Wire movement has been lightened, and since there are three wire adjustment points, it can be adjusted on the car body, the Throttle holder, and the Throttle side, it can also be used with the Other Brand ProductCarburetor with a large body.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The rise is crooked.
The wire rise from the carburetorTop is curved, so it is easy to pass under the tank. The two play adjustment points are also appreciated. View detail
Throttle Cable VIRAGO250
The Stainless Mesh texture is also very satisfactory with American and Match. View detail
Looks PetitCustom!
[How is it used?
Used for city touring, not applicable parts for MONKEY125, but I used them because they are for Grom!
Was the one you received as per Image?
Beautiful Mesh
Was the installation difficult?
Almost all of the parts are pontoon type. Adjustment of Wire at Throttle part is a pain in the ass.
How was your experience with it?
Effectiveness is the same as OEM Product, indistinguishable
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
No worries, just replace it.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
At Restore
Used for MONKEY Restore
At first, we were going to use the original OEM with oil, but we could not reproduce it due to broken Rust and Wire and oil loss, so we chose this one.
It is easier to obtain than OEM and I am satisfied with the quality that seems to be more than the same etc.
View detail
Dress-up and a slight decrease in cost...?
I've been using an OEM Product from a used car body I got used for a long time, but lately it's been sluggish even when I oil it, so I decided to take the plunge and replace it with a new one!
At first, I ordered OEM, but then I got a surprise. 'Isn't this one cheaper on Total?' I thought of this and cancelled the OEM order and reordered this one.
The feeling of the product is the same as the OEM product.
Well, it is an Accelerator Wire, so it is not surprising that there is no difference in Large...
The look is silver mesh and matches the mesh of the Brake hose, so I am personally satisfied with the color and the fact that it is cheaper than OEM.
View detail
Great if you have lowered handle bars
Although this is for a grom, it will fit on a Monkey 125. I installed Protaper Honda Mini bar's and the oem cable slack annoyed me. Plus it was hard to adjust the throttle without ending up with cable binding. The kitaco cable fit much better and look great. I was able to remove more of the throttle free play without getting binding issues. View detail
The quality is very good!
It's my favorite way!
And the quality is also very good --------------------------------------------- ------------- I wanted to be the best!
And the quality is also very good
View detail
Installed on MONKEY125
It is for the Grom, but the frame and engine are the same, so I put it on the Monkey 125.
It was just fit because I replaced the Handlebar with a Takekawa one.
The operativeness became considerably smooth though the influence of the thing that I adjusted when I refurbished it might be large.
If you have never touched a Throttle Wire before, it is better to leave it to the shop.
Mesh texture is good and Wire is Material.:This is a Recommendation product because Stainless Steel is supposed to improve durability.
View detail
I've been using it on my APE 50 (OEMcarburetor) with no problems.
I purchased this product because I have used this product in other people's Reviews and the OEM is rather expensive.
The Handlebar is not OEM, it is Large (Grip position is higher), but the length is not insufficient.
View detail
When I changed to PCcarburetor.
When I changed to PC18, I discovered that the Throttle Cable was not long enough.
If I change to Throttle Cable for CD50, which is compatible and long enough, can I solve the problem? I bought it.
good point
The result is perfect, the Throttle Cable is now properly deflected. Now the tension of the Throttle Cable is eliminated.
In addition to the CUB, Honda vehicles with Horizontal TypeEngine are also compatible.
PC18 and PC20 are the same size, so they are compatible with PC20.
A bad point
None
The OEM Throttle Wire is not long enough for the CUB carburetor conversion.
In such a case, please use for CD50 or here.
View detail
It's cosy!
I bought this for Repair.
Variation in length helped, too!
View detail
It took it properly.
Exchange the Clutch Cable after exchanging it when you lower the Handlebar. The Accelerator Wire came to return properly even if you disconnected Handlebar. I regret that the tip is Plating. It can not be adjusted on Handlebar side. Well it's because it's cheap so can not be helped. View detail
I chose by color.
We are incorporating Red Parts at Point KSR 110.
Accelerator Wire was about the extent I thought to replace it just to be sure, but I was looking at Webike! And decided on the color of Outer tube promptly.
Naturally installation is also no problem, it can be used for Smooth without funny stuck.
It incorporates Mugawa's Big carburetor kit, but it was also a big decisive factor to say that this Cable is compatible with VM 26.
I'm glad I bought it.
View detail
KITACOMulti-throttle cable
Until now I have used Small Craft for PC 20's Throttle Cable for VM 26.
Since there are two places to adjust, Throttle's adjustment range was wide and it made it feel good.
View detail
Cheap making makes lots of dimensions.
If it becomes a long Throttle cave which exceeds 1500 mm to equip Scooter with High Solo and Big carburetor, this KN planned product (http : / / www. webike. net / sd / 21415350 / ) There were only SALETag, so I bought it for 1179 yen. But even at non-Sale prices are almost unchanged and a little disappointing.
In the product page, White and Black Outer color Cable are displayed side by side, but this product is Red.
There was Inner discharge amount of 100 mm in the item description, but actually it was only about 80 mm. Inner length is somewhat owing to being too long, but as long as it is short, I can not do anything about it, so this point is frustrated with Large.
For PWK 28 is sung, but if it is this it is likely that Length will be missing if you add a Top.
There is only one Nut for Length adjustment and Tube for Waterproof is not attached. Also, Thailand does not have a protective resin Cover, and the Outer tube is not doubled, so it is cheap overall. Although KN planning product is as high as 300 yen, 2 Nuts for adjustment of length are attached, WaterproofTube and protective Cover are also attached.
Although it is not described, since the angle of turn of the Gold genus Tube part is not about 90-degrees but about 70 degrees, attention is necessary.
When purchasing, you should not think that you can use it smoothly.
View detail