Reviews
For everyday use
I bought this for regular use for Repair because the Throttle Wire on my old Motorcycle broke and OEM Parts were out of business and there was nothing I could do about it.
Screw lock was used for the Thailandoko fixing Screw, and the Thailandoko was fixed Firmly with a Solder at the root of the Thailandoko.
View detail
For emergency spare parts and maintenance of old cars
[How is it used?
TZr250R (3XV) I purchased this as a spare/for replacement for the Throttle Wire of
We chose this product because it was inexpensive and the Size feel seemed fine.
Was the one you received as per Image?
L-Type Wrench is included as shown in the photo.
Since it takes up very little bulk, it is convenient to carry as a spare.
How was your experience with it?
It is stored in the storage space under the Tandem seat for emergency use when touring.
Fortunately, we have not yet encountered a SCENE to use.
TZr250R (3XV) In the case of the "Oil Pump", the OEM Product is discontinued and there is no Replacement Product due to the complexity of splitting the 1 pc Wire into a carburetor, YPVS, and Oil pump.
Many used ones are also in poor condition, and since they are consumable parts that will have to be replaced at some point, they will not be wasted as long as you continue to ride because you will eventually use them when that time comes.
[Points to note]
It would be nice to have a Wire cutter to adjust the length.
How did it compare to other products?
The delivery time was so long that I also bought a No Brand product sold at a certain Large Hand NetShop just in time.
Fortunately, I have not used either of them, but the No Brand product did not come with tools, so I think this product is better for emergency use. I think this one is better for emergency use.
【Review】
Although it is best not to use it, it is a product that can be soldered for emergency use or for long-term use, so it will not go to waste.
I have had to push Motorcycle for an hour in the past because the Wire ran out, so it is a good idea to have it with you to avoid that kind of feeling.
View detail
And for Throttle mods.
Purchased for Wire length adjustment to replace OEM Throttle with High throttle.
Usually Outer and Quantity:It is not only for repairing when the inner wire is broken, but also for replacing the inner wire of the old car when the length is not enough due to high throttle like me or OEM parts are no longer available.
Usually, you will have to adjust the length by cutting the opposite part of the Thailandco, but that part is also neatly frayed and fastened, so that it does not get caught or cause problems from before Spec.
UniversalWire may look good, but stretching and durability issues can be large, so we recommend using these reliable products.
View detail
It's best not to use it
I bought Inner wire from KITACO.
I take it with me in case of emergencies on the way to touring (I don't want to use it).
The area of the bag is quite a lot, but it is very thin because it is Wire, so I think that it can fit under the Seat if it is a Scooter, and I think that it can fit under the Seat if it is a Motorcycle, and I think that it can be stored in Dee Bucketc. without taking up space.
There is enough length, and there are two kinds of thickness, a thick 2mm length of 1.5m for Clutch and a 1.5mm length of 2m for Slot.
1.As for 5mm, LWrench, Cable end and Screw are also Quantity.:It was in the Set, and the one of 2mm longitude is only Wire, too.:I wanted it to be Set.
If you are in the middle of touring, you may need a tool to cut the wire?
When you use it for the front brake of the old car, it stretches and it becomes Large strange. When it is used for the front brake of an old car, it stretches and becomes Large strange.
View detail
That would help.
The wire on the Large old TL125 OEM Throttle that I was using for MONKEY broke so I repaired it here.
At this time, I thought about using a high throttle kit outside the company, but the cost is much cheaper and the only thing left to do is to do it yourself. (Lol)
All you have to do is cut the broken wire to length and secure it with the attached screw.
As a working hang, it is best to use a wire cutter that can cut well.
If you don't have it, you can also cut it with Nipper, but it takes a lot of power and the cutting surface becomes easy to fray.
Putting it through Outer and ThailandCo before cutting will save you a lot of trouble later.
But if you pour solder on the cut end, I think it can be used permanently.
On a side note …
Because the overall length of the Thailand coil is a little long and the head of Screw was 0.2?
So I used a sander to shorten the length a bit and delivered it.
It's not impossible to deal with Trouble at the Touring Destination, but if you are worried about it, I think it's wise to carry a spare.
View detail
Feeling of security
Once in the past, when I was a Large student, the Throttle Wire broke and I had no choice but to The bitterness of pushing a Motorcycle home
I have memories I was young and strong and managed to push through to my house, but I was tired, LOL
When I stumbled upon this Inner Wire Set, I knew I had to buy it soon..
I snapped it up instantly
If you think about the hardship when the wire is cut, it is necessary to always have an inner wire I think that it is not a thing that can be cut very often, but it is not known when it is cut, so if you always have it on hand, you will have a sense of security is Extremely Large
I haven't used it yet "Mounting accuracy When "Performance/Functions is a 3 star (probably a 5 star if you use it)
View detail
It purchased by the thought which clutches even at straws in order not to obtain a wire by a discontinued car. What is necessary is to take out an inner wire and just to cut to die length together. If it fixes with a screw lock or solder although
It purchased by the thought which clutches even at straws in order not to obtain a wire by a discontinued car.
What is necessary is to take out an inner wire and just to cut to die length together.
If it fixes with a screw lock or solder although it is with the object for emergencies, long-term use is also taken as it is possible, and it has written on the opinion.
it cuts in order to unite die length, but power is needed very much -- probably, only it also has reinforcement.
In my case, it remained very well, since the drum for clutches was also sold, it purchased, and it was able to use also for the clutch wire.
View detail