Reviews
Fits: SUZUKI address V125, SUZUKI address V125
Fire
It's look firee that's extinción how I imagine great service View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
No grooving required.
Complete 2FingerSpec., 125cc is sufficient for both with light input.
There is a groove cut on the lever part, but I would have preferred not to have it because it is not pleasant to the touch, and I sometimes grip it as if it were sliding.
Adjust is conveniently adjustable steplessly with Dial.
This product appears to be compatible with 20 years or earlier.
View detail
Hoho!
Installed over a month after purchase. LOL.
It's a cf4ma and I was able to install it with no problems!
The only drawback is the high price.
Momentum is a LARGE thing when it comes to potty mouths!
The resin cover attached to the Thailand coil at the end of the wire needs to be cut off. However, it would be better to remove the collar inserted on the lever side and insert the resin cover as it is.
?Don't forget to Grease up!
View detail
Slit is Parenthesis good!
I used it on my SEA BASSZZ. It is for the Addressv125, so it cannot be installed as-is, but if you remove the plastic cover from the end of the rear brake cable, it is large and strong.
The front side interferes with the cowl a little bit, but it seems to be fine for use.
I like the fact that the adjustment knobs are infinitely adjustable.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, Others NISSINRadial type Brake master cylinder, SUZUKI GSX-R1000, KAWASAKI ZX-6R
I was a little worried because it was made overseas, but…
I was worried about the Billet parts that are not made in Japan, so I bought it. The gold price was also quite high, so my fears were unfounded. The accuracy is good and the anodized is beautiful. I am very happy with it so far. I've been using it for a while now, and it's only a matter of time before the moving parts rattle and the anodized fade. the Asian detailing is a bit all over the place, but the design and parenthesis are good, and I'm happy with the Large variation. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125
Clutch lever is a ….
The Clutch lever does not have the part that pushes the Switch on the OEM Lever, so I replaced it with another company's Lever.
I was able to install the brake lever with no problem.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
It's great for Clutch2Finger!
[How is it used?
This is a conversion from OEM.
Was the installation difficult?
For the Clutch Side, you will need to remove and install the Cable.
How was your experience with it?
It's a short bar, so it's especially good for those who grip the Clutch Side with two fingers, index and middle.
[Notes]
There are some models that cannot be installed, so please check before purchasing.
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
Stable Lidea
Even if I put my finger on the Lever, I do not feel uncomfortable because of the smooth Curve. I have used three Lever of Lidea with this, and I cannot return to the square Lever any more. View detail
Fits: HONDA MSX125 (GROM), HONDA MONKEY125
Used for MONKEY125
It doesn't come with an adjuster, but you can fine tune the lever position and extend it. I like the Logo and Two-tone color of RIDEA. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
Not on the 2020 gsx-r125
When I took it to a motorcycle shop, they couldn't install it because the shape of the clutch lever was wrong. If I had known that before I bought it, I wouldn't have bought it because it's not cheap. View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
I can recommend this product as a fairly satisfactory one.
The short lever was a bit confusing at first, but after a few miles of riding, I got used to it and it felt more like a part of the motorcycle. It was. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
I think it's good
I wanted the Parking brake feature and saw it in Webike's newsletter, so I bought it.
The installation manual was easy to read and it didn't take too long to install.
After installation, there is no dragging of the brake and the stop-lamp is not left on, and the accuracy is good.
The rest is up to you to ride.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ1FAZER, YAMAHA FZ6R, YAMAHA FZ6FAZER, YAMAHA FZ8, YAMAHA MT-07, YAMAHA MT-09, YAMAHA XJ6DIVERSION
Stable Lidea
Lidea's short lever, which is also installed in Grom, is foldable A bit pricey But I always put my finger on Quantity:It's very comfortable to drive with 2pc. The non-slip process is also very comfortable and less tiring Outstanding View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GTR125, YAMAHA GTR125Aero
The Touch on Brake has changed
The Lever ratio naturally changes, so the Touch of Brake is better
I made Titanium, so it looks more luxurious and Brake is also more expensive than the OEM It's a little bit short, so the operability is improved
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
Tightly, tightly
Dissatisfied with the grom levers and was looking for a short lever, finger quantity:It's a perfect fit for a 2pc seat and has a non-slip shape and tightly structured It feels right This is the best Lever I've ever had and it's a pleasure to operate The price is a bit high, but in terms of quality, it's probably justified View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
RIDEA LV4
RIDEA LV4 Omega Short Foldable Knob Adjuster Lever Set (for Left and R） When I bought, the manufacturer had no goods and needed to produce now. I waited for 20 days because I knew that this brand was very good for making bicycles. Their products were also very good and exquisite. I was very confident about their products. Sure enough, when I received the goods, I opened it and saw it. It was very good and the workmanship was very fine. I like it very much. It helps to ride. I recommend you to buy it. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155
For the price …
Parenthesis is good
Accuracy is not so good, and movement is a little reluctant
Parking brake parts are difficult to install and adjust, and I'm concerned about what I installed
There are likely to be other good levers for a similar price
View detail
Fits: KAWASAKI ZX-10R
It's all about the price
My own breaking is done with my index and middle fingers
I have a 2017 10RR, and with the OEM Brake lever, my index finger is just I had the impression that it was difficult to Brake because it hit the Curve part
So I chose the one with a loose Curve
As a result, it's just fine
If you've ever used a Foldable, you'll know that it feels uncomfortable when breaking I think
But this product is non-foldable without re-tightening (So-called OEM) It was wonderful to feel close to the
Loosen the Master CylinderMounting bolt and move it to the Left Side If I gave it up, I was able to bring it to a place that was close to ideal for me personally
View detail
Fits: YAMAHA BWS100(BWS100), YAMAHA GRANDAXIS(GRAND AXIS), YAMAHA BWS X125(BWSX125), YAMAHA BWS125(BWS125)
Good.
The position of Brake can also be finely adjusted, the texture is still firmly made with Fashion.
Also carefully translating Instruction Manual (written in here please fill in, it is easy to understand when adding.
Although the price is a little expensive, I think that there is no loss by purchasing.
View detail
Fits: YAMAHA BWS100(BWS100), YAMAHA GRANDAXIS(GRAND AXIS), YAMAHA BWS X125(BWSX125), YAMAHA BWS125(BWS125)
Good.
The position of Brake can also be finely adjusted, Brake's Touch has also improved.
Next time I will try to wear this Brake to CYGNUS.
View detail