Reviews
Fits: Others
OEM color to Black
I bought 4 levels of adjustment, but I should have bought 5.
However, I am happy with the Black.
View detail
Fits: Others
Short lever for Gixxer SF250 DAYTONA Nisshin Radipon
I have no problem with the Nisshin radipon-attached Lever.
When we changed to an external clutch holder, we changed to a short lever, so we also changed the brake to a short lever.
The product itself was as expected, but I think the price is a little high for Repair Parts.
View detail
Shorter than expected
Although the difference is only a few centimeters compared to the standard length, it is shorter than expected when installed.
Perfect for Small Type Motorcycle.
As expected, the production is unquestionable.
View detail
Fits: その他
As a spare for Brake lever
I purchased this as a spare for my Brake lever.
I think it is a very large thing to have as an on-board spare in case the lever breaks due to a fall, etc. and you are unable to return home by yourself.
The brake lever on the Master Cylinder can be changed to 6 positions, while the one on the Nisshin Master Cylinder can be changed to 4 positions.
As for myself, I do not need 6 steps, so I consider 4 steps to be sufficient.
View detail
Fit to radial master cylinder and operate perfectly. The short size matches to the size of my bike handle bar nicely. Look much better. View detail
Fits: Others
Nisshin Brake lever
Spec. changed from Silver to Black Lever.
It has a good grip.
View detail
Fits: その他
It's all good now!
Brake lever&hellip that was suddenly deformed by Accident;
It wasn't broken, so I was able to operate it, but it didn't feel right
I searched and found the NISSIN Brake lever with a view to replacing it
You can adjust the level in 6 steps to suit your position It is
Material:The cost performance is also very good for the accuracy feels high
View detail
Best liver
My bike is gsx400s katana. Best lever in this web site. View detail
Best Match for MONKEY
Size is just right for Minimoto, such as MONKEY
The Nisshin's Lever has 4 levels of adjustment, but this Lever has 6 levels of adjustment, and it's a cosmetic Also good
Recommended
View detail
Fits: その他
high
When I bought the radiphone, it was only available in silver
I replaced it with Black (Of course, I also replaced the Clutch Side with it.)
It looks refreshed and tightened up
But it's expensive
View detail
Fits: Others
Because I fell down ,,,
Although it was the end to break footpeg and Lever due to unfortunate standing, I managed to get back from the root because I broke ahead of time without breaking it with Packer, so I managed to return Is it such a thing?.
I bought it because there is no choice unless I bought it for the time being, but it was good as I got the next day.
View detail
Fits: Others
Stable items
There was only a firm Manufacturer feeling the feeling of feeling and feeling Fit when wearing very well.
I feel the height of rigidity even if actually used.
This time, I bought the opportunity to buy the used Motorcycle in second hand and Lever became old, so I was looking for something similar.
I made it better than the previous ones, but I was glad if you increased the selection width of Dial to adjust by about one more step. Currently I am using the first of Memory ....
View detail
Fits: その他
Looks good!
Nissin 1 when making the ape into a disc / I bought it for 2 masters. Because it is a mini bike, the clutch lever is about the length of this short lever, so I changed it to short, but it looks satisfying. It became about the same as the clutch lever and balanced between left and right. However, I did not think that the feeling of the brake will change so far. The brake does not work unless it grips strongly so I personally became difficult to use. Rather than the lever is far away. Even if you make the adjustment closest to you, it is still far.. It is four-stage adjustment. By the way, the normal length lever is a five-stage adjustment. This is not that far.. I am now returning to a long normal guy. Conclusion. I did not suit my body! Lever is not bad. View detail
Fits: Others
Short lever for NISSIN Radial master cylinder
I attached the NISSIN Radial master cylinder, but it was attached to the vehicle which was previously listed by OEM, but at that time I did not mind, but in this vehicle Lever was too long and it was hard to grasp. It became easy to grasp considerably in place of Short lever.
View detail
Fits: その他
Recommended for people with short fingers
Because my finger is shorter than general men, I chose this Short lever.
The replacement is to remove the Bolt nut as a fulcrum and to replace it with this Lever, but do not forget to apply Grease in that case.
From StandardLever, it makes it easier to apply Lever and Brake seems to be well-liked.
It is also recommended for small women in hands.
View detail
Fits: Others
NISSINNisshin 【NISSIN Master Cylinder repair
I bought it with RetroMaster cylinder.
It is a product of NISSIN so it can be used without any problem.
I can also recommend it as for Repair because the details are well built..
Only Black or Buff clear has Color, so I thought it would be nice if you could prepare Plating.
View detail
Fits: その他
[Webike Monitor] Although it wavered with whether the whole Master cylinder will be exchanged in maintenance, it decided to do Repair of. Since I am using the same product for about ten years or more, it is not uncomfortable. When ther
[Webike Monitor] Although it wavered with whether the whole Master cylinder will be exchanged in
maintenance, it decided to do
Repair of.
Since I am using the same product for about ten years or more, it is not uncomfortable.
When there was a Billet type in the
said form, he thought whether it could be dressed up, but since the familiar thing is first, the
operation system continues to purchase the product.
Although it is hard to treat it, since a little
regulation Dial is not used during a run, it has no
demerit mark.
View detail
Fits: その他
A Lever also likes the same Black as a Grip and it has equipped with this Lever. There is a sense of togetherness and it can assert touch different from others. The Dial which adjusts hardness is also attached and the function surface is also ex
A Lever also likes the same Black as a Grip and it has equipped with this Lever.
There is a
sense of togetherness and it can assert touch different from others.
The Dial which adjusts
hardness is also attached and the function surface is also excellent.
It has taken care and ridden so that
fall may be carried out and it may not bend.
View detail
Fits: Others
Since between until it reaches is long in case of a Lever with a bend, fatigue is felt at the time of clutch operation or a Breaking. This Lever had few bends, the hand arrived easily, and I also regarded appearance as whether it becomes close to a
Since between until it reaches is long in case of a Lever with a bend, fatigue is felt at the time of clutch operation or a Breaking.
This Lever had few bends, the hand arrived easily, and I also regarded appearance as whether it becomes close to a Sports.
It takes care and values so that it may not fall.
View detail
Perfectly fit to Daytona Nissin 19mm Radial Master Cylinder of my CB1300. Very fast shipping(from Japan to Korea, within just 5 days!), resonable price(cheaper than domestic on-line shopping mall even including shipping charge!). Nice one.
Perfectly fit to Daytona Nissin 19mm Radial Master Cylinder of my CB1300. Very fast shipping(from Japan to Korea, within just 5 days!), resonable price(cheaper than domestic on-line shopping mall even including shipping charge!). Nice one. View detail