Reviews
Great grip comfort
The OEM Lever for the SV650 is a good or bad bike Level, but this Lever not only looks cool, but I was surprised at the high quality when I held it for the first time after installation!
Installation is easy and takes less than 30 minutes if you have experience with grease up and lubrication of Lever!
View detail
Fits: SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSR750
The texture is very good.
As expected from Made in Japan, the texture and finish are very beautiful.
Easy to operate as both lever and position can be changed.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125
I purchased this product because I have small hands and Brake lever puts a lot of pressure on my fingers when I grip it.
[How is it used?
I bought a CT110 HUNTER CUB this time, but my fingers hurt when I hold the RightBrake lever.
Maybe it's just me, but my middle finger is a little deformed after many years of use, so it inevitably causes pain when I use it.
So we decided to use this product made by Kanaya, which we have been replacing since the CB era.
Was the one you received as per Image?
Yes, it meets my expectations, it matches the color of my Motorcycle and looks great!
It was just like the plane.
Was the installation difficult?
The OEM lever is removed for installation, but the mounting bolt is not fully removed and the head is stuck in the accelerator wire.
It was difficult to pull it out because it got stuck. After that, once it was removed, it was just a matter of soaking it in, but it was a little difficult.
It took a while, but it was done!
How was your experience with it?
It is easy to use because the user only needs to adjust the position that fits his/her own medical needs with 6 levels of adjustment.
[Included Parts:were they on?
Included Parts:was only Lever, so I didn't have to buy aTouch separately like before, which was a big help!
[Was there anything that disappointed you?
I have no problem with the product itself, but it would look better if the mounting part was the same color.
Other items that would be helpful
If possible, lever should also be installed on the holder side (if it is greased up at the bolt).
I think it's a good idea... If you don't have BrakeGrease, you need to add it (apply it) ?Even if it's just a little bit of s
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The installation point may be a bit tricky to remove the mounting bolt, but you should be careful not to bend the Accelerator Wire part.
as a request
As I mentioned before, a little grease on the lever itself, or a small amount of tube attached to it, would be nice.
View detail
This is a good one:??
I thought it was easy to grip from the time I tried it at the store, but I was skeptical because I had not actually driven it, but even after using it on a 400kmOver day trip Two, I am not tired at all! View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Lever replacement for CBR600RR
[How is it used?
City Riding ~Touring
Was the installation difficult?
Instruction manuals are also available and are extremely easy to follow.
How was your experience with it?
I am up to my ring finger when I use it, so Short is just fine and easy to use.
[Was there anything that disappointed you?
It is not so much a disappointment, but even if the Lever is matted, the Attachment section will be glossy. It may bother some people.
I was not sure whether to choose Blue or Silver for the Adjuster, but I chose Silver because of its harmony with the Bolts around the Handlebar. Personally, I think it was the right choice.
There are six levels of adjustment, but please note that fully locking the handlebar to the furthest position will cause partial interference with the vehicle body.
As a note on installation, I don't think the Instruction Manual mentions it, but it is recommended to apply grease to the areas where the gold elements rub against each other.
Since there is vibration around the handlebar, we also used a screw lock agent to prevent the screws from loosening.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR
Appearance and operability
[How is it used?
City Riding ~Touring
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Instruction manuals are also available and are extremely easy to follow.
How was your experience with it?
I am up to my ring finger when I use it, so Short is just fine and easy to maneuver.
[Included Parts:were they on?
I don't think there are any missing items.
[Was there anything that disappointed you?
It is not so much a disappointment, but even if you choose the matte type, the Attachment part will be glossy. This may bother some people.
Although not specifically mentioned in the Instruction Manual, it is recommended that grease be applied to areas where the gold species rub against each other.
Also, the handlebar section is subject to strong vibration, so a screw lock agent was used just in case.
Note that when the Adjuster is expanded to the maximum Large, some interference will occur. 5 out of 6 levels are Large sturdy.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25
Good looking and well made
The replacement is only OEM and it looks great! View detail
The feeling of use is double ○.
The way I gripped the lever caused my small and ring fingers to get caught between the lever and my fingers and my grip tended to become loose after standing for a long period of time.
The grip and comfort are good, and the replacement has made driving very comfortable and smooth.
View detail
Fits: HONDA SUPER CUBC125, HONDA CT125 CT110 HUNTER CUB
The texture is GOOD.
The OEMLever position is a little far for my wife who has small hands, so I replaced it with this Lever which has an adjustment mechanism.
The replacement itself is super easy, but on the CT125 it is a bit of a challenge to pull the Bolt out. I'm very happy with the grip, precision and quality, and my wife was happy to see that the Lever position is closer and safer.
View detail
Replacement while repairing
I decided to purchase this product after reading the multifaceted reviews, thinking about shortening and dress-up while replacing the brake lever that I broke when I was standing up.
The installation itself was not that difficult with tools and took less than 30 minutes.
On the other hand, the Clutch Side was as good as the Brake Side until I put the Bolt through, but when I touched it after assembly, it had a strange wobble… Maybe I'm too worried about it, but I may have to add some kind of work in the future. I may have to add something to it in the future.
I'm generally happy with the look and feel of the lever, as it replaced an OEM lever that felt a bit long, but is now SMART and fashionable.
View detail
Fits: HONDA ADV150, HONDA ADV160
Brand's peace of mind
I bought this for ADV160.
There are many cheap Chinese-made ones on the market, but I wanted to install a reliable one made in Japan if I have to.
I chose this product. I have no complaints as I have put it on other Motorcycles I own.
I feel safe. I think it is cool.
View detail
Fantastic
Ordered these for my Suzuki GSX-1400, the fit is fantastic and great feel as well. Great quality and great adjustments as well. View detail
Made in Japan
There is no wobble, it is a Snap and can be held without any worries.
All the cars had Chinese ones on them, but the difference was remarkable in comparison.
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF
easy to grasp
I chose the same Matte Black for the Lever and Adjuster.
The lever itself is easy to grip and can be adjusted to the desired position with the adjuster, which helps reduce fatigue during long tours.
I don't know if it is the compatibility with the bar end, but when the clutch lever side was gripped tightly, it hit the clutch lever and both sides were scratched.
But I think it is a good product both in Design quality.
View detail
Fits: HONDA SUPER CUBC125, HONDA CT125 CT110 HUNTER CUB
Excellent finish and performance
I replaced the existing genuine brake lever -> k-speed lever -> u-kanaya brake lever.
I sold it because the K-speed brake lever had a lot of play.
Replaced with U-kanaya brake lever.
The build quality is great and there is no hesitation.
I attached a photo, but you can't see it clearly. -------------------------------------------------- -------- In the existing genuine brake lever-> K-SPEED lever-> u-kanaya brake lever. Sell it as a player of the K-SPEED brake lever Replaced with U-Kanaya Brake lever. The creation is great and there is no play I attached a picture but I can't see it well. Powered by Google Translator
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Increased sense of luxury
YZF-R25 2023 type was replaced with YZF-R25 2023 type.
It is one of the most stable and well-known manufacturers, and is a recommendation product as one of the dress-up items.
There are many types of Adjuster and Lever colors, so you can choose the one that suits you best, and the precision is my personal favorite part.
View detail
Fits: KTM 125DUKE, KTM 200DUKE, KTM 250DUKE, KTM 390Duke
Aluminum Billet Lever SetShort
Street Riding Touring
Good to know it was as per the Image.
I had a friend of mine install it.
Installation was quick and easy.
Easier to grip than NORMAL.
Product as expected
The year was listed as 2020, but there was no problem with the 2021 model.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
Fitted on REBEL250 2023
Mounted on a 2023 REBEL 250. The feel and texture are both good. Installation was easy. View detail
Fitted on SV650 2021
Installed on a SV650 2021. clutch lever and was too far away, so it is just right. The quality and feel is good.
It was easy to install.
View detail
Fits: HONDA CB650F, HONDA CBR650F, HONDA CBR650R, HONDA CB650R
Eukanaya Lever Exchange
First of all, the appearance can be changed to the color of your choice with Fashion.
I was able to differentiate myself from others.
The feel is better than OEM and it fits my hand very well.
You can ride your Motorcycle with peace of mind.
I was able to replace it easily by myself and I'm glad I bought it.
View detail