Reviews
Necessities when replacing Exhaust System
The KITACO product that was the least expensive was used. No problems and no exhaust leaks. View detail
Also a necessity when removing Scooter Tire.
I wanted to buy OEM product to replace the rear tire on my Address110, but SEA BASS and Honda do not allow personal user to search for parts easily, so I chose this manufacturer which I have purchased from Nankai Parts in the past. This is my first purchase for the Address110, but I have used this manufacturer's Gasket for the ksr110 and the Axis. When you remove the rear tire of the Scooter, it is necessary to remove the exhaust system. To prevent exhaust leakage, replace the Gasket with a new one. View detail
OEM Compatible Parts
I'm not sure if this is a compatible part for 18293-KV3-004 or OEM source, but it can be used normally.
It is a little cheaper than taking it from HondaOEM.
View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
R1-Z ChamberGasket
I used KITACO Gasket for R1-Z because the OEM one is quite expensive. I think the product itself is well made and good, especially for those who change the chamber from time to time. View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA goldwing, HONDA goldwing, HONDA goldwing, HONDA BENLY CD125T (BENLY50), HONDA CB125R, HONDA CB125T, HONDA CB125T, HONDA CB223S, HONDA CB223S, HONDA CB400SS
Delivery Method
This is not a product impression, but it is a problem because I can't place and distribute products when they don't fit in the Post! View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
Exhaust System Replacement
Reliable manufacturer's product. No exhaust leaks, easy installation!
I always use this product when servicing and replacing Gasket.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
Used for MD47
It worked without any problems. Costa rica is the best. View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Any vehicle.
I use it every time I replace or remove the Exhaust System.
Quantity:It is kind of nice that it is 1 Set of 2pcs.
I guess it would be better to use OEM, but it would take a long time to order, and these are usually sold at supply stores and motorcycle shops.
good point
The number of lineups in the ●Size.
● Quantity:1 Set of 2pcs. so if you use one, you can Stock the rest.
● Easy to obtain.
Accuracy and quality are fine.
A bad point
● No.
Exhaust system replacement is of course a good idea, but if you feel that the fuel mixture is a little strange, you may also want to suspect the Gasket.
Use and reuse are strictly prohibited.
View detail
It fits securely
It was installed securely. There are no exhaust leaks. I think this performance is sufficient for such a low price. View detail
Fits: YAMAHA TZR50, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZR250, YAMAHA TZ50, YAMAHA TDR250, YAMAHA RZ350, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA RZ250, YAMAHA R1-Z
Consumables at the time of Chamber replacement
[How is it used?
TZr250R (3XV1) This was used in conjunction with the Chamber replacement of
I chose KITACOBrand because I felt comfortable with the name KITACOBrand and there were a lot of Impression.
Was the one you received as per Image?
Quantity as described:1 Set of 2pcs.:It is 1 Set for 1 Vehicle, so it is easy to use.
How was your experience with it?
It is a conforming product, of course, but the size and feel, etc., were perfect.
There are no exhaust leaks and it is perfect.
Since it is a consumable item, it is essential when replacing the Chamber.
[Points to note]
It is not limited to this product, but it is good to apply Liquid Gasket as a countermeasure against exhaust leakage if you are concerned about it because it may shift when installing the Chamber.
How did it compare to other products?
Exhaust Gasket for 3XV is quite limited, but I purchased this product based on price, evaluation, etc.
【Review】
Quantity:It is available in 1 Set of 2pcs. and has no performance problems at all.
Although almost no one buys OEM products, they are very inexpensive compared to OEM products, which cost more than 2,000 yen per pc.
View detail
Fits: YAMAHA MT09TRA, YAMAHA MT09TRA, YAMAHA MT-09 SP, YAMAHA MT-09A, YAMAHA MXT850D, YAMAHA TRACER900 GT (ToRacer), YAMAHA TRACER900 (ToRacer), YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZ1
Size is perfect? (^-^) /
It is Exactly stuck without Wobble. View detail
To install Full Exhaust System
I purchased this product to install the Full Exhaust System on my ZX25R.
I have driven about 1000 km since the replacement and have had no problems.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Necessities for Exhaust System Removal/Installation
The exhaust pipe had been installed and the flange was bent due to over-tightening.
The Gasket was still crushed and stuck to the Cylinder.
With the Pick tool, I forced it off by sticking the Pick while pulling on the Gasket.
Cylinder was cleaned with foam Carburetor cleaner and Dustcloth, and exhaust pipe was cleaned with Oil stone.
When installing the Gasket, it is best to install it on a slightly inclined surface with the Front facing up so that the Gasket will not fall off.
Put in a new Gasket, tighten the exhaust pipe by hand, and set the Quantity:Pair (for Left and Right) Tighten it to even etc.
If you get to the point where it will not tighten, adjust the exhaust pipe up or downQuantity:Pair (for Left and Right) The first time, the client shakes the machine to see if it is settled. Then tighten it again by hand.
When it got to the point where I couldn't tighten it anymore, I tightened it with an Offset wrench at about 90-degrees to 180-degrees to even etc.
If there are no exhaust leaks, the system is complete.
I think it is loose, so I recommend checking regularly or double nut. If you tighten it too much, it is not the end of the world.
I did not take pictures of the work since it is a friend's vehicle.
View detail
Fits: SUZUKI BIRDIE90 (4Cycle), SUZUKI BIRDIE 80 (4Cycle), SUZUKI BIRDIE 50 (4Cycle), SUZUKI BIRDIE 50 (4Cycle), SUZUKI BIRDIE 50 (4Cycle), SUZUKI GAG, SUZUKI GS50, SUZUKI GS250FW, SUZUKI DR-Z70, SUZUKI DR-Z50
Maintenance
Used when the exhaust system is removed for maintenance.
Quantity:2pc. The price for the Set is cheap.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Used to replace Type 3 Grom Exhaust System
It was a little difficult to remove the NORMAL Gasket, but after 10 months of exhaust system replacement, I managed to get it off by prying it with a slotted screwdriver. When I took it off, I found that it was in a tattered and battered state.
It was the first time to replace the exhaust system, so I can't compare it with the normal basket, but it didn't stop on the exhaust system side, so I had to use my fingers while putting it on the exhaust pipe. Quantity:It's set. (I did this because I failed to apply Silicon grease with a dot, but there may have been a better way. Maybe there was a better way.)
After that, I drove about 100 miles and checked it again, and it was fine.
View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Used on GSX-R125
Purchased KITACOGasket to replace OEM exhaust system with external exhaust system.:I don't have many chances to remove the exhaust system, but I keep 1pc. as a spare. View detail
Fits: KAWASAKI VULCAN400, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI KLE400, KAWASAKI GPz1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX
To replace the Full Exhaust System
Purchased to replace Full Exhaust System on ZrX1200DAEG
I think it's cheap
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Quantity:1 Set of 2pcs. is useful.
I remove the Exhaust System several times a year for maintenance.
In that case, I always replace the Gasket, so I use this product.
Quantity:It's a set of 2pcs. but it's reasonably priced, easy to use and very useful.
Each time Quantity:2pc. When I have used the first set, I try to buy more so that I always have some in stock at home.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To replace the exhaust system on my MONKEY125!
I used it to replace the exhaust system on my Monkey 125. It installed without any problems and no trouble.
It is made by a reputable manufacturer, so you can use it with confidence.
View detail
Fits: YAMAHA MAJESTY125, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS)
No problem
I have been using KITACO Exhaust pipe Gasket for a long time.
I've never had a problem.
I suppose you could use a cheaper one, but I want to use it with peace of mind.
View detail