Reviews
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Good!
[How is it used?
No leakage of waste gas
How was your experience with it?
No problems
How did it compare to other products?
Good cosmetics in a pack of 2
[Points to note]
None
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA SR400 1JR, YAMAHA SR400 3HT1-9, YAMAHA SR400 3HT1-A, YAMAHA SR400 S 1JR, YAMAHA SR400 S 3HT1-9, YAMAHA SR400 S 3HT1-A, YAMAHA SR500 1JN, YAMAHA SR500 3GW1-9, YAMAHA SR500 S 1JN, YAMAHA SR500 S 3GW1-9, YAMAHA TX650 All models, YAMAHA V-Max1200 3UF All models, YAMAHA XT250X 5C11-, YAMAHA SEROW250 3C51-55, YAMAHA SEROW250 FI 3C56, YAMAHA SEROW250 FI 3C5C, YAMAHA XG250 TRICKER 5XT1-7, YAMAHA XG250 TRICKER(FI Vehicles) 5XT8-A, YAMAHA ROYALSTAR1300 4WY1-, YAMAHA ROYALSTAR1300 TOUR CLASSIC 4WY1-
Exhaust System Replacement
Front pipe has been replaced!
Items essential for the exchange!
Replaced Titanium with Titanium
Design Change
View detail
That's expensive.
I bought a used AKRAPOVIC Exhaust System, but there was no Gasket.
That's too expensive!
It was thin and gnarly when I tried to put it in.
I managed to get it in, but it was a bit of a mess.
I bought it because I had to, otherwise the exhaust would leak, but I wonder if you can find it if you look hard enough. (Cheap)
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA ROYAL STAR TOUR CLASSIC, YAMAHA SR500, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
No problem
I bought this product because it is a little cheaper than OEM Product. No problem at all. View detail
Fits: SUZUKI LETS CA1KA All models, SUZUKI LETS DX CA1KA All models, SUZUKI LETS G CA1KA All models, SUZUKI LETS II CA1PA All models, SUZUKI LETS II CA1KA All models, SUZUKI LETS II-Combination brakes CA1PA All models, SUZUKI LETS II-L CA1PA All models, SUZUKI LETS L CA1KA All models, SUZUKI LETS II-S CA1KB All models, SUZUKI LETS II-S CA1PC All models, SUZUKI ZZ CA1PB, SUZUKI ADDRESS V125 CF46A, SUZUKI ADDRESS V125 G CF46A, SUZUKI ADDRESS V125 G CF4MA All models, SUZUKI ADDRESS V125 S CF4MA, SUZUKI ADDRESSV125-G CF4EA, SUZUKI VERDE CA1MB All models, SUZUKI VERDE CAIMA All models, SUZUKI STREET MAGIC II TR50S CA1LB, SUZUKI STREET MAGIC II TR50SD CA1LB
The quality of the original cylinder gasket
About quality and texture
Excellent quality of the exhaust ring, an absolute copy of the original part, the execution completely repeats the geometry of a high-quality gasket, the antennae to hold the ring in the exhaust window are present, although they are not in the product photo, please note this
About the feeling of use
Excellent exhaust flange fit and even crushing of this ring results in excellent sealing and no exhaust leaks.
Products to buy together
The set contains 1 ring, choose the quantity according to your needs
Difficulty of installation
Easy installation, thanks to small stops, it is securely fixed in the cylinder groove and provides a high degree of sealing of the exhaust
holes
Cost performance and comparison with other products
Low price, high quality, comparable to the original spare part, completely repeats the shape and manufacturing technology
About shipping and packaging
The simple packaging that you can see in my photo is no longer required, the gasket is not susceptible to damage.
Any concerns, cautions, or advice when purchasing
I can only recommend this product, it is the highest quality!
-------------------------------------------------- -------- About Quality and Texture The excellent quality of the exhaust ring, the absolute copy of the original spare part, the performance completely repeats the geometry of high -quality gasket, the antennae to hold the ring in the exhaust window are present, although they are not in the photo of the goods, consider this ABOUT THE FEELING OF USE An excellent fit of the exhaust flange and uniform crushing this ring leads to excellent sealing and the absence of exhaust gas leaks Products to Buy Together There is 1 ring in the kit, select the amount for your needs Difficulty of Installation Simple installation, thanks to small stops, is securely fixed in the cylinder groove and provides a high degree of sealing of the exhaust holes COST Performance and Comparison with Other Products Low price, high quality comparable to the original spare part, completely repeats the shape and manufacturing technology ABOUT SHIPPing and PACKAGING Simple packaging that you can see in my photo is not required, the laying is not subject to damage Any Concerns, Countions, or Advice When Purchasing I can only recommend this product, this is the highest quality! Powered by Google Translator
View detail
Cheap, fast, OEM same etc.
OEM Gasket 18293-KV3-004 SpringAExhaust pipe and the same etc.
There is no problem in using it. Incidentally, we use a thin coating of heat-resistant liquid Gas, including when using OEM products.
The good thing about this product is that it's inexpensive; OEM Product is 4,268 as of the date of posting. (@ 2,134) The price is about double at
OEM Product is also available now, Delivery time from order:on delivery, usually around 5 days. It was
If you are not very particular, this product is fine.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Reliable Quantities:1 Set of 2pcs. helped!
We prepared this item because we need to remove the Exhaust System when replacing the Rear shock of CT125. As we are planning to replace it with SCRAMBLER Exhaust System next month, we have prepared this product.:1 set of 2pcs. is convenient! However, when we reinstalled the exhaust system this time, we seem to have forgotten to remove the old gasket (W), and it was tightened a little off. Fortunately, there is no leakage, so we left it as it is for the sake of time, but when we have time to work on it, we plan to take it off and put it back on in the proper position. The quantity of the new exhaust system was originally supposed to be used for the new exhaust system next month.:2pc. I was able to use the second set of Gasket, so I did not have to rush to order more.
Since these are inexpensive parts, it is always a good idea to procure several amateur mechanics for this type of Gasket and ORingetc.
View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Smaller than OEM
I used it on my YAMAHAXG250 TRICKER and the outer circumference is smaller than OEM.
There were no functional problems and no exhaust leaks, but there was no snagging at all during installation, making temporary fixation very difficult.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
For exhaust manifold replacement
Used to replace the exhaust manifold with SP Tadao
It was difficult to remove the OEM Gasket, but the installation itself was not that difficult.
I checked the exhaust leakage after one month of installation, and there is no leakage and no problem.
View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA goldwing, HONDA goldwing, HONDA goldwing, HONDA BENLY CD125T (BENLY50), HONDA CB125R, HONDA CB125T, HONDA CB125T, HONDA CB223S, HONDA CB223S, HONDA CB400SS
no problem
I used it to install nrf's Exhaust System on my CB223S.
There were no exhaust leaks and no problems.
View detail
exchange
The exhaust was dirty due to leaks, so it was replaced with a new one during maintenance and cleaning.
Since it is no different from OEM Product, this product is sufficient because the price is a little lower.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Used to replace Exhaust System of CUB
I used it to replace the Exhaust System on my ja58.
It was a very normal exchange.
It comes in a 2-pack, so I will use it when I return it to the OEM Exhaust System.
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Reliable Fit
It is safe to use. No exhaust leakage. View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
high
Gasket exchange itself is something I think some people leave to Shop,
I would have liked to see some notes on the exchange.
Price could be a little lower.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FS, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F4i, HONDA CBR600F4i, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR600F
There's no doubt about it.
It was as good as expected. Great cosmetics. ?? View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
It is a must-have item when replacing the Exhaust System.
I wish I could buy it at a lower price.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250, YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XZ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ750D, YAMAHA XJ650
Excellent for Cost performance
[How is it used?
It is used as Exhaust Gasket on XJR400R.
We are replacing the oil filter every 6000km, but because it is an external full exhaust system, the exhaust pipe must be removed when replacing the filter, and the exhaust gasket must be replaced.
Up to now, YAMAHAOEM Product500 yen/piece×4 pieces would be 2000 yen, so it was quite an expense, but this product is Quantity:2pc. I purchased the set for 450 yen, which is a very reasonable price, and I thought it was a KITACO product, which is a famous manufacturer, so I could be sure of its safety.
How was your experience with it?
The product itself is OEM Product and little manufacturing method (Material) seems to be different.
Is this a problem since they are about the same thickness, I've been using Liquid Gasket in conjunction with it and so far no disposal leaks and I'm happy with it.
I am a little concerned about the next time I replace it because other reviews said that it was very sticky when removing it.
How did it compare to other products?
Anyway, I think the price is excellent.
There are also several Other Brand Products, but their prices are not that different from OEM products, so it is safer to buy OEM products.
[Points to note]
I have to install the exhaust pipe after attaching the Exhaust Gasket, but it falls off at a high rate.
If you do this, you will pick up sand on the ground and it will be a hassle to wipe it off again. It is a good idea to apply oil or Liquid Gasket to the backside of the device to prevent this problem.
Other items that would be helpful
Opinions and requests to Manufacturer:Quantity:I would appreciate it if you could offer a cheaper version in 1 Set of 4pcs.
View detail
Fits: YAMAHA XJR1300, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR125, YAMAHA SR125, YAMAHA RZV500R, YAMAHA DT200WR, YAMAHA DT200R, YAMAHA DT125R, YAMAHA FJ1200, YAMAHA DT230 LANZA (DT230), YAMAHA BRONCO, YAMAHA VIRAGO400, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YD250
More cost-effective than buying OEM
[How is it used?
We used it to return the Exhaust SystemNORMAL for an XJR1300C that was about to be inspected.
There were no exhaust leaks and, of course, the Size could be used Exactly.
How was your experience with it?
This is a comparison with OEM Gasket, but it is just as cosmetic.
It is no different from the OEM in terms of performance or preventing exhaust leaks.
How did it compare to other products?
KITACO has a white core and paper-like material, while KITACO has a white core and paper-like material.
I wonder if the OEM is the Gasket that contains Carbon, and the Material that seems to make it easier to remove the Gasket the next time it is removed.
However, while the OEM is 1pc. and the list price including tax is 506 yen, KITACO is Quantity:2pc. The cost is 500 yen for the set, so it is very cost-effective.
In this case, we used the OEM for the return of the OEM Exhaust System after the vehicle inspection.
It will be two years before I take it off again, and I don't want Gasket to be stuck on the Engine side....
[Points to note]
KITACO's Gasket of this type is Large strange to peel off after long use, so OEM is recommended for those who do not like it.
If the surface of the Gasket falls off and is annoying during installation, you can apply a thin layer of liquid Gasket to the surface and stick it on, making the work smoother.
View detail
Anyway, it's expensive!
Anyway, it's expensive.
I can only assume they are changing the Size on purpose.
I would love to have the same size at a lower price from KITACO!
View detail
Fits: HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio cesta (DIO CHESTA), HONDA Dio cesta (DIO CHESTA), HONDA Dio SR (DIO), HONDA Dio ST (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA Dio ZX (DIO), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA Live Dio (LIVE DIO), HONDA Live Dio (LIVE DIO), HONDA Live Dio J Special (LIVE DIOSPECIAL Knife), HONDA Live Dio J Special LIVE DIOSPECIAL Knife), HONDA Live Dio ZX, HONDA Live Dio・S (LIVE DIO)
No problem!
The quality of the product seems to be the same as OEM Product, and I don't think there are any problems regarding its use. View detail