Reviews
Shape is almost OEM
OEM Clutch initial position is not quite right, so it was replaced.
I tried to use a Z company's one before this one, but it had the same model number as the S1000, but the shape of the cutout for the mounting position was different, so it stopped in a slightly retracted position. I wanted to make the initial position closer, so the position was better, but the Low RPMAssist was almost ineffective. I don't need it, but I don't like the fact that a certain function doesn't work, so I decided to use this one, which has a different model number from the S1000 and the GT. The adjustment method is Screw, which is a bit uncool, but it works just fine.
I changed the color, but the shape is almost the same as the OEM shape, so I wondered if there was something more I could have done. I thought it would have been nice to have something more.
View detail
Conti II type can be NORMAL.
The OEMHandlebar is so large that if it is replaced with a narrower one, the OEM will have a little extra space.
However, it could be left as OEM, but it interfered with the RadiatorRight Side surface.
It is a product that is better to have than not to have.
View detail
Explosive light, but not compatible with Off-roadFender
H4 Valve replacement Type, so replacement is easy.
Valve size is the same as Halogen bulbs, so there is no need to worry about replacement work.
After installation, the impression is bright! Super bright! It's super bright!
It also reduces power consumption, which is essential for TRAIL vehicles that turn the Cell many times on forest roads.
It may be due to the brightness, but it seems as if the light is diffusely reflected upward by the Fender.
I think it may be due to the Decal, but there is more light in the upward direction, which cannot be managed by optical axis adjustment.
Not enough to adversely affect oncoming traffic, but enough to require a little care in making adjustments after installation.
View detail
Ideal for Wiring processing of homemade Parts!
I used it for the Wiring process of my own ShiftIndicator, and I strongly RECOMMEND using Protective Tubes like this one, as Wiring looks and durability sucks when left bare! I'm glad I bought it because it has withstood rain and UV rays for almost a year and is very durable! View detail
Yellow-colored areas fall off considerably.
I had no problem with the fit since it is the same size as the manufacturerOEM, but the yellow-colored part on the back of the sponge is falling off. But the yellow-colored part on the back of the sponge is falling off.
I have a feeling that if Carburetor sucks this in, it will clog up, so I will not use it and buy OEM.
View detail
Fits: YAMAHA Majesty., YAMAHA Majesty 250SV, YAMAHA Majesty C, YAMAHA Serow 225WE, YAMAHA Bronco., YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA TW200, YAMAHA XT250X, YAMAHA TW225, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA RZ50, YAMAHA MAJESTYC, YAMAHA MAJESTY, YAMAHA MAJESTY 250SV, YAMAHA BRONCO, YAMAHA MAJESTY 250SV
Front and Rear are also replaced with the same brand.
I felt a chill when touring with Tandem touring, so I replaced the Rear with this pad from DAYTONA along with the Front.
Satisfied with both braking power and control. No complaints.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
The pictures are confusing.
I bought this for use on a 2023 SV650.
It's my fault for not checking carefully, but I saw two Levers in the sample product photo, so I decided to order a Quantity:Pair (for Left and Right) Quantity:I bought it thinking it was Pair.
When it arrives, it is only Brake lever.
I had no choice but to purchase an additional Clutch, but since it was not sold for the SV 650, I had no choice but to return it.
The product itself had a good texture, but the sample photos were confusing.
View detail
Fits: KAWASAKI KX125, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA XT250X, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA DT230 Lanza, YAMAHA DT200WR, SUZUKI Jebel 250XC, SUZUKI Jebel 250 GPS Ver., SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI DR250SHE
Slightly Mild than Red Pad?
I replaced Red Pad with this one.
The previous one locked easily when I stepped on it with a thump, but this one did not lock, perhaps because it is somewhat mild.
Since it is an OFF car, I don't think it would be easy to lock it, so this level of gain may be just right.
View detail
Fits: KAWASAKI KX125, YAMAHA Serow 225WE, YAMAHA Cerro 225W, YAMAHA XT250X, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA DT230 Lanza, YAMAHA DT200WR, SUZUKI Jebel 250XC, SUZUKI Jebel 250 GPS Ver., SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI DR250SHE
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
The only thing that I thought was different from the Red Pad was that it locked easily when you stepped on it with a thud, but I don't think it did that….
It may be a Large cutoff to lock, but I'm afraid to lock it so easily, so maybe this is as good as it gets.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA TT250R, YAMAHA TT250R Raid, YAMAHA DT230 Lanza, YAMAHA DT200WR, TRIUMPH T955 DAYTONA, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, SUZUKI Bergman 400, SUZUKI Sky Wave 400, SUZUKI Jebel 250, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI RM250, SUZUKI RM125, SUZUKI DR250SHE, SUZUKI DR250S
I've only driven about 100km ….
I replaced Red Pad with this one.
I drove about 100 km for now and it works normally.
No wonder.
This may be more suitable than Red Pad, which is more aggressive because it is an off-road vehicle.
It was before, so I don't know much about it. (Sweat)
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER SF250(ECSTAR COLOR), SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GIXXER250, SUZUKI GIXXER250, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125
It's a cautionary recommendation IMPRESSION!
It is currently a 2022 Gixxer 150 and before that it was a 2018 Gixxer 150
I ordered Rear's Brake Pads in that vein ….
Shaft position does not fit….
The shape is slightly different….
I checked again, and the Gixxer 150 has this 951 as the initial MODEL for the 2019 model year.
MAJORChanged after 2020 model was 675 in SBS
This was an IMPRESSION to warn everyone to buy after careful attention.
The rating is from the 2018 model year, affordable, not too bad or too bad for a normal ride, and that it is a recommended Pad.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, HONDA CRF250L, HONDA CRF250L SPECIAL EDITION, HONDA DAX125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA CB125R, HONDA CB125R, HONDA GROM, SUZUKI GIXXER150, SUZUKI GIXXER150, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125, HONDA CB250R, HONDA CB250R, HONDA CRF250RALLY <S, HONDA CRF250L <S
Ordinary, but enough for a normal ride.
exchange procedure
Remove the pin (1), apply a Phillips screwdriver or similar tool to the shaft holding the bad, and lightly tap the shaft with a hammer.
I'll remove the ? pod in case it's not too hard and try to grind it.
Click here for ?Needed Tools (excluding Wrench)
4) By the way, the decrease is like this
(5) Push back the pod with PistonTool and install it in the reverse order of the removal procedure.
View detail
Good flashing
Very nice flashing lights. View detail
Fits: HONDA GB350, HONDA GB350S
I think COSPA is expensive
I bought a new car with the new Type added and I replaced it.
The bend of Lever was good and it was easy to finger.
Clutch side rattles have been reduced and the clutch is easy to grip.
Some products are expensive, but Quantity:Pair (for Left and Right) So I think the cost performance is high.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1100, HONDA CB1300SUPERTouring, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB750, HONDA CB750, HONDA CBF1000 (06 - 10), HONDA CBF1000F, HONDA CBF600N/S (08 - 14)
Fine Alloy 55 (Fine alloy) Brake Pads
Compared to other companies' pads, when the front brake is applied, it works much better than before. View detail
The product was exactly what I expected.
This is the third time I've bought U-KANAYA's Lever,
I decided to use a short type for the first time because the car to which it is attached is a Grom (JC92) and it is small in size.
The look was quite Refreshing and the feel of the operation was perfectly fine with three fingers.
The quality was satisfactory, as I had already experienced with the previous two times, so I was satisfied with the quality I expected, although there were no surprises.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA AUGER, YAMAHA FORCE2.0, YAMAHA X FORCE, YAMAHA BW'S125, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS Gryphus
Exhaust system is changed so intake air is also changed.
Installation was easy and two types of filters were included to match the Engine's TuningStyle. View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI XANTHUS, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 250SE, KAWASAKI ELIMINATOR 250LX, KAWASAKI ELIMINATOR 125, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR250, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400
With reference to your Impression.
I bought one from this Manufacturer based on your Impression. View detail
Bar handle has
I used to use 10cm Long on my HURRICANE Pipe Handlebar Kit, but it was too long, so I decided to use 5cm.
Clearance is just fine.
View detail
Fits: HONDA VFR750, HONDA CB1000, HONDA VTR1000SP, HONDA CB1300SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000, HONDA VTR1000F FIRESTORM, HONDA VFR800, HONDA CB1300SB [SUPER BOL D'OR] , HONDA CB1300SB [SUPER BOL D'OR]
Clutch operation is easy!
My Left hand, which was always bad on the way home from touring, does not hurt at all!
The grip was a little jerky with the OEM, but after changing it, the grip felt nur-nur.
Recommendation:Silicon grease and OEM Boots should be purchased separately when installing.
MASTER Boots are likely to be shredded unless they are O/H, so …. (Mine was shredded…) 。
If you are wondering about brembo's MASTER, I think one way is to try this first and see how it goes.
View detail