Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Tail Bulb replacement for KSR's Fender Eliminator Kit
I purchased a used KSR80, but the previous owner installed a Fender Eliminator Kit, and the tail lamp is a Lucas type.
There was a Trouble with Tail Bulb immediately after purchase.
I removed the Lens to see the model of the Lamp to replace it, but unlike the usual Double Bulb, the head was a Small Rhinoceros Bulb.
This Type was not sold at Home center or Car Shop 。 Maybe MotorcycleParts specialty stores have them, but I can't find any near me. 。
However, because the length of the Tail Bulb was different, it interfered with the Lens, causing the Lens to chip, melt, and consume more power due to its higher wattage.
I had put it off because it was inexpensive but the shipping and other things made it needlessly expensive, but I had some shopping to do at WeBig, so I bought it as a package deal.
After installation, there was no interference (obviously), and since the Watt number was lowered, the power consumption was also lowered, eliminating the concern factor.
I am planning to eventually switch to LEDs, but there is a barrier of full-wave rectification, so I may end up putting it off.
View detail
Classic color and cool!
I installed it on my JA07SUPER CUB and it looks great with the classic color! And the Yellow Bulb is easy to see even in the rain! I like the durability and the fact that it doesn't break easily! I am very pleased with the durability of the bulb and the fact that it doesn't get damaged easily! View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Punching in as is
As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.
I don't know about durability so far.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Sufficient light intensity even when converted to low W
Used for KSR2 (B6).
Color of Pine Stripe:YellowMax is also used for the liter machine I own, and the moment I saw it. Hmmm, something weird just came in." I like the Large layer because of the Impact that makes me think "I'm not a big fan of the Large layer.
KSR2 OEMValve is 25W for both 12V and high low, and I used to use High Wattage bulb, but it was not bright enough and the life of Valve itself was significantly shortened. I am satisfied with the bright yellow color as I expected.
The Yellow Bulb is reputed to be easier to see in bad weather conditions such as rain, but I personally do not notice much difference. I personally do not feel that it makes much of a difference, but it definitely increases visibility from other cars, so that is enough for me.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Can be used for socializing.
I don't know if I will use it, but I have been wanting a "Round and round Tail" for a long time, so I bought it. I bought this one because the price is not so different from the one that is priced at about 2,000 yen from Yahoo! View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
No problems so far.
I just wanted to White the Light, so this cheap Valve is sufficient. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Made in Japan for peace of mind
There are plenty of cheap Valves out there, but Valve almost always uses M&H Mats Stripe. I don't remember Trouble until now.
G18 BA15S, but the Valve tip is Lens-like and it is supposed to emit a sharp light.
I certainly feel that way.
Made in Japan.
View detail
For NSR250R MC18
I used this product for a tail lamp to save power consumption for my old 2nd motorcycle. I purchased this and L8186 at the same time and installed them because the direction of the pin is opposite to the direction of the light as shown in the description of the product. View detail
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: Others
Visibility Up
Since it is a scooter, the flickering during idling, which is not stable, is unavoidable, but it is brighter and more visible than the OEM. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
White light!
The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail
Normal is fine.
Tail lamps that are always on are consumable.
Stop-lamps are still alive but replaced immediately when noticed to avoid maintenance failure due to trivial things.
We had thought about using LEDs, but we concluded that Standard was the best choice due to its cost performance and reliability.
In the case of DJEBEL, the OEM installed Carrier interferes with the approach of the Tail lamp cover to the Screw. This is where SEA BASS comes in:remove the rear screws from the carrier, loosen the front screws, and stand the carrier up like a Gal wing, and the replacement can be completed in a few minutes.
The durability of the bulbs is a matter of luck, but since it is a product of FOR JAPAN MODEL MANUFACTURER, it is safe to use for the time being.
View detail