Reviews
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Unchanged appearance from OEM and improved operability
It is used for crf250rally50 and md44.
The appearance is the same as the OEM appearance, but Short
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
OEM look and feel for improved operability
Used in crf250rally50 and md44 。
Short lever is Direct in operation and responds to detailed Action.
The same appearance as OEM is also good
View detail
OEM look and feel for improved operability
It is used for crf250rally50 and md44.
It has the same appearance as the OEM, with Direct operability and responds to detailed Actions.
View detail
The HorseMaterial is hard.
Material the Tank of WR:When I replaced it with IMS to make it plastic, the Hose on the end of the Cap was too plain, so I bought this one. However, the material of the hose was too hard and came off easily, which was caused by the fact that the cap did not have a shape to prevent it from coming off. I should have used Aron Alpha. View detail
Fits: KAWASAKI KLX250R (Competition), SUZUKI TS50 Hustler, YAMAHA TY250Z Scottish, YAMAHA TY250Z Scottish, KAWASAKI KDX125/SR, KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX85, KAWASAKI KX85, SUZUKI DR250S, SUZUKI RM125, SUZUKI RM125
Not included with DR-Z400
It may be good for other Motorcycle, but I can't install it on DR-Z400s. the Bolt hole position was off by about 4-5mm.
I am disappointed because I bought it because it was conforming.
I would like to return it but it is too much trouble to send it back so I will throw it away.
Everyone please take note.
View detail
Fits: KAWASAKI KLX450R, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX450F, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI RM125, SUZUKI RM250, SUZUKI RM80, SUZUKI RM85, SUZUKI RM-Z250, SUZUKI RM-Z250, SUZUKI RM-Z250, SUZUKI RM-Z450, YAMAHA WR450F, YAMAHA WR450F
Good
Everything was fine, the shipping was fast, the price doesn't include the tax but you can see this information on the website, and they give all documents for easyer and fast administration for the customs. View detail
Fits: HONDA CRF250 RALLY, YAMAHA WR250R, YAMAHA WR250X, YAMAHA YZ450F
The OEM Exhaust System for WR250X/R includes (?) It's not working
D31-41-650 was used for WR250X.
As a result, it is not possible to pimp the OEM Exhaust System.
All the inner diameter outer diameter all the lengths are no good, it was torn when I put it in the OEMManifold side….
I wonder if the quality is not consistent because some of my predecessors can't use it and some can use it normally.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Did not work well
XR250MOTARD, used for front and rear Blinker LEDs.
It did not work well.
Specifically, I have become a high flasher.
Honda's Front blinker seems to be a bit special as it also serves as a position.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
It was not too short, but just the right length.
Since it is a Brake Side, I don't grip the Lever with 4 fingers, but it was just long enough to hang my 4 fingers.
The hand guard that is currently installed has space, so NORMALLever is not a problem, but some hand guards can get stuck if NORMALLever is used. (It actually happened.)
The reason for this purchase was that the clutch side was changed to short for driving operation, so the brake side was also changed afterwards.
I think the product quality is fine.
View detail
Fits: KAWASAKI KDX250SR, KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, SUZUKI 250SB, SUZUKI Jebel 250, SUZUKI DR250S, SUZUKI DR250R, SUZUKI RMX250S, SUZUKI TS200R, KAWASAKI D tracker, SUZUKI DF200, SUZUKI DR125S, SUZUKI DR200, SUZUKI TS125 Hustler, KAWASAKI D Tracker, SUZUKI TS125 HUSTLER, SUZUKI DR200, SUZUKI DR125S, SUZUKI DJEBEL250
easy to do
[How is it used?
I keep it in my Parts box as a spare for Races and practice. Recently, I often organize Races or help out as a marshal rather than attending Races, so I can help people in trouble if I have it with me. It's called "Aruyo Osan", isn't it?
Was the one you received as per Image?
As per Image, Off car Lever has always bought this Series from DRC.
They are usually cheaper than OEM Parts and often in stock, which is a big help.
Was the installation difficult?
I haven't used it yet, but I just need to remove one Nut and one Pivot bolt1 pc.
It is a good idea to clean and Grease up at that time.
It is quite dirty, and if sand gets into it, it can become abrasive and the Holder can become thin and rickety. There is nothing more stressful than a rickety clutch.
I even put in a KITACO Shim to adjust for rattling.
How was your experience with it?
DRC's Lever is not that different from OEM, so there is no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've already written about it, but it's cleaning Grease up, because Clutch operation is important for Off cars.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI supersherpa, SUZUKI 250SB, KAWASAKI D tracker, KAWASAKI SUPER SHERPA, KAWASAKI D Tracker
Safe to have
[How is it used?
I keep it in my Parts box as a spare. Recently, I have been organizing Races and helping out as a marshal more often than attending Races, so I can help people in trouble if I have it with me. It's called "Aruyo Osan," isn't it?
Was the one you received as per Image?
As per Image, Off car Lever has always bought this Series from DRC.
They are usually cheaper than OEM Parts and often in stock, which is a big help.
Was the installation difficult?
I haven't used it yet, but I just need to remove one Nut and one Pivot bolt1 pc.
It is a good idea to clean and Grease up at that time.
It is quite dirty, and if sand gets into it, it can become abrasive and the Holder can become thin and rickety. There is nothing more stressful than a rickety clutch.
I even put in a KITACO Shim to adjust for rattling.
How was your experience with it?
DRC's Lever is not that different from OEM, so there is no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've already written about it, but it's cleaning Grease up, because Clutch operation is important for Off cars.
View detail
Convenient to have
I bought Repeat because I lost it when I caught it on a tree while driving in Woods. There are short ones that do not use the Stem hole, but I use this one because I do not have to worry about where to put the cap when refueling and it does not get dirty. View detail
Fits: HONDA CRF250 RALLY, YAMAHA WR250R, YAMAHA WR250X, YAMAHA YZ450F
Required Items for Silencer Replacement
It is an essential Items when replacing Silencer,
When newly fitting the exhaust pipe, install it on the exhaust pipe side rather than putting it in the silencer side.
I think it would be smoother to put the Silencer side over the Silencer side.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Good vibes
It is a little shorter and easier to grip. View detail
Fits: SUZUKI Jebel 250XC, SUZUKI Jebel 250XC, SUZUKI DR250R, SUZUKI DR250R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250 XC
It is good to be normal.
The product was as described, a little shorter than the OEM, and the lever touch was smooth and the brake adjustment was easy. I have the impression that it can be used for a wide range of applications from city driving to long touring. View detail
Additional purchase for spare parts
I was afraid that I would run out of this product, so I purchased an additional one as a spare.
Comparing with the spare inventory on hand now, I see that the Package has changed and the
The product itself has slightly rounded corners.
I don't think it is a problem as far as strength.
I fell down a couple of times, but I think it was because of the Bush Guard.
It worked for 15 years just because the tip circle was removed.
Operability is usually good.
No problem at all.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
Don't break or bend.
Standard Parts for Off cars
A little peace of mind♪
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, KAWASAKI D Tracker 125, KAWASAKI KDX125/SR, KAWASAKI KLX125, KAWASAKI KLX250, YAMAHA XT125, KAWASAKI D Tracker X, KAWASAKI KLX150, KAWASAKI KLX150, KAWASAKI D-TRACKER-X, KAWASAKI KLX250, KAWASAKI KLX150, KAWASAKI KLX150
What a relief!
The OEM is spared and the short lever is replaced.
It is a standard ITEMS.
View detail
I wonder if it's hard to break.
The OEM is spared and the short lever is replaced.
It is a standard ITEMS.
View detail