Reviews
Japanese Vehicle Inspection Correspondence
Before the inspection of SR400, I went to the tester place off site to check the light intensity. I had to go back and forth to Tester two years ago, but they did it without any extra charge, I switched to the new Stanley Hyper Halogen LightValve, which I brought with me again. It is just 150mm away from the specified light level, but it is OK.... Hyper Halogen Light is a high efficiency valve and can be brighter with the same power consumption as the standard valve, but it seems to have a shorter life. View detail
LED Bulb from leading manufacturer
Stanley is a leading manufacturer of OEM parts.
I am satisfied with both the brightness and the spread of light. The picture was taken with the position lamp in place.
The original brightness of the Valve is brighter than the image because the brightness is set to low.
View detail
SUPER CUB110 JA59 and SR400 FE Tail lamp LED
[How is it used?
Tail lamp LED for SUPER CUB110 JA59 and SR400 FE to reduce battery load.
Was the one you received as per Image?
No problem
Was the installation difficult?
Both JA59 and SR have BoltQuantity for Tail lamp Cover.:Easy to use, just remove it with 2pcs and change to LED light.
How was your experience with it?
No problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
It was cheap.
Anyway, I thought that the price was so low for a Stanley product, which I trust more than foreign-made products, even after I ordered it, but when it came in, I was surprised to see the price and quantity!
I installed the Meter Bulbs because I thought that if one bulb went bad, the other bulbs would also go bad, but two of the bulbs are replaceable!
The bulb packs are also easy to remove and store.
View detail
A little high-end light bulb
Used for LITTLE CUB.
In fact, the same shape MH Pine Stripe" I bought it at the same time as the Valve made by The Matsu Stripe Valve was purchased at Webike for less than $500. This product is almost twice as expensive as Matsu Stripe's at the regular price. The actual price is around 700 yen. I was curious to see how this 200 yen difference would affect the performance, so I bought two types for spares.
This Hyper Bulb is as bright as Halogen! This Hyper Bulb was included in the Package because of the CatchCopy that says "Brightness as bright as Halogen!
I expected it to be brighter than FuTwo's Pine Stripe.
The results of the comparison experiment are ・・・・ close!
Comparing the brightness of the projected area on the wall in a dark room, it might be brighter than that of a normal white light bulb, if you ask me. It was an impression that the light was brighter than that of a normal white light bulb.
Either way, it is inexpensive, so it is a good idea to go with Stanley (this product) in the hopes of getting One Upgrading!
The higher-end product is Halogen, but it costs around 1,500 yen, so I feel that this one, which is half the price of Halogen, is sufficient.
The Stanley was made in Thailand, and the cheaper MH Matsu Stripe was made in Japan.
View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
Reliability Large Stanley
Replacement of Meter lighting and Pilot bulb for VTR1000F.
The VTR was under total disassembly and was replaced.
I thought about OEM Product, but the price is too expensive for 9 pieces!
Quantities at Reliable Stanley:I bought 1 Set of 10pcs. because it was cheap! 。 No complaints and peace of mind.
View detail
LED Bulb for improved visibility!
Replaced with StanleyLEDStandard valve to improve visibility of Stop/Tail.
The deciding factors were that it is made by Stanley Electric, which is also used as an OEM for domestic motorcycles and automobiles, and that it has the Japanese Vehicle Inspection Correspondence and luminous color. (Color) was the light bulb color.
Lumen value when luminous (lm) 370/45lm, Kelvin value (K) The light:2700K, a natural coloring without becoming BlueWhite with the explosive light of so-called LEDs, so it can be casually installed even on older motorcycles.
We also expect that the load on the Battery will be reduced since the power consumption will be lower with a rating of:12/24V 2.8/0.4W.
Compatible Light Bulb Type is S25 BAY15d, so it can be used for most car models.
In my case, I installed it on a TRX850, so I had to remove the Seat Cowl and Tail lens during the installation process, which was a bit time-consuming, but I think the Kill is Large sturdy without any particular need for more work than necessary.
View detail
Lamp brighter
I bought this lamp to replace the original one that burned out. This lamp shines brighter, but not much stronger. I wanted it to be brighter. I hope it will work for a long time. I bought a lamp to replace the original one that burned out. This lamp shines brighter, but not much stronger. I wish it was brighter. I hope it will work for a long time. View detail
Great!
I have a SEROW250 with a Grip heater, but when I turn on the Blinker and Stop-lamp with Idling, the voltage sometimes drops below 12v, so I bought it to save power.
Even if Stop-lamp is turned on, the voltage hardly drops and Large succeeds!
This is only for SEROW250, but the Tail lens is really hard to remove, so it is better to remove the Tail Lamp Lamp ASSY and work on it, even if it is troublesome.
Remove the Seat, Number, Rear Fender, and Tail lamp in this order, and you will find a hole through which the Hexagonal Wrench that removes the Tail lens passes.
Working without removing the Tail Lamp Lamp ASSY is impossible to attach the Lens, even if you can manage to remove it!
View detail
In the Restore of VANVAN90
I used it to repair a broken tail lamp on a Van Van Van 90 that was given to me by a friend's father.
The 6vBattery can die without your knowledge, and if you run with the Light on without realizing it, you will inevitably run into various bulb breakages.
We are grateful to WeBig for always having 6v bulbs in stock because few stores have them in stock!
View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
1 pc. as spare
I haven't had to replace it in a long time.
Replace with a new one just in case
Well, it's just an ordinary light bulb.
Quantity:1 Set of 2pcs. so the other one is a spare.
View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA PRESS CUB 50 DELUXE, HONDA PRESS CUB 50, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI SUPERSHERPA , KAWASAKI ELIMINATOR 250 , KAWASAKI ELIMINATOR 250 , KAWASAKI SUPERSHERPA
Nothing to say.Quantity:1 Set of 2pcs.
ELIMINATOR 250's MeterLamp ran out and was replaced.
I thought I bought only one because Elimi only has 1 pc. of MeterLamp, but Quantity:2pc. I was happy to find a set in the package, but I think that the users who only need 1 pc. should be careful.
As it is really a Wedge Bulb of Two as a thing, it is a quantity correctly.:If you set it, it glows normally. The last Stanley was used for 60,000 km, so the life expectancy is about the same as the last time.
Recently, there are Wedge type LEDValve, but I personally dislike the brightness of LEDs! I like Filament's soft brightness, so I hope that this type of product will be available forever.
I tried to add a reference photo, but it was too bright due to exposure. The actual image is much darker, so please don't misunderstand me!
View detail
The 6v bulb, which is now rare and precious.
The 6V ball, which is now rare and precious, used to be available at Home center, but now it is not sold at all. 。 We keep several types under Seat in case the ball runs out while you are on the road. It is recommended to have a spare. View detail
No way, Quantity.:1 Set of 10pcs.
I thought that the price of 6v Meter class had gone up since it was sold for about 700 yen.:It was 1 Set of 10pcs.
It's a Meter grade replacement, so you only need to replace two … Well, if you see this imprement, please buy with caution.
View detail
just in case
For use in the car with Phillips Screwdriver for preventing ball breakage while on the road. View detail
CRF250 to full LED
CRF250RALLY50 was not LED only Tail bulb, so I bought it to change to full LED.
There are similar valves available from various manufacturers, but we decided to go with Stanley, a long-established manufacturer of light bulbs, because we wanted to get a good one.
Valve itself is very carefully made and very different from the inexpensive Valve.
The replacement itself can only be done by removing the Seat and then the Tail cowl, but it is not that difficult.
The light intensity after the replacement is also brighter, making it a very satisfactory product.
View detail
For automotive use
It is mounted on board with Phillips Screwdriver as a countermeasure against running out of Valve on the road. View detail
Stable Stanley
We introduced this led by saying Stanley in light bulbs.
The brightness changes as clearly as a light bulb when the Brake is turned on or off.
Then there is durability.
View detail
Savior of old cars
Tail lamp rated 12V23/8W S25 BAY15d StanleyA (BP) Replacement from 4879.
Quite good! Decided to come back here next time!
It is a bit expensive, but I definitely recommend it over purchasing cheap Chinese or other products that are more of a gamble and have many initial defects.
Not the common Red, not the annoying White explosive light, but a soft light emission similar to a bulb color as described.
I wanted to replace the one in my car.
This is a lifesaver for old car drivers who had given up on LED Tails because they were the only cool multi-light LEDs.
The phenomenon where the Blinker would not blink at intersections at night unless the Axel was blown, which is a common problem with old cars, has been greatly improved.
View detail
Standard will be this next time.
Double Bulb is used for Tail lamps, and I'd rather use a reliable brand with Stanley's name on it, rather than looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
We have not experienced any problems with the use of the License Plate Light as well.
View detail