Reviews
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
Genuine Continental Fuel Hose
I do have a lot of bikes come in with really bad fuel lines for one reason or another and I always like to have some of this hanging around for just this reason. One bike in particular had the original stock line which was far from good and this bike was literally a few years old, 2020. Really rigid line was replaced with this. I do like Continental fuel hose as it is proven to work exactly as it should and not be too rigid but also has enough flex to be abnle to loop around weird placements. This was well priced from Webike and they also packed my order with great care so not to damage or bend this hose where it should not be bent. It came as a nice loop.The flexibility is excellent. A really nice fit to the clamp fitment too. Very pleased, thanks Webike. View detail
![[SR(SR)]Slip-on Silencer ExhaustGasket](https://img.webike-cdn.net/catalogue/images/126670/03_TS.jpg)
Fits: HARLEY-DAVIDSON FLSBMODEL, HARLEY-DAVIDSON TRYGruid, HARLEY-DAVIDSON Free Wheeler
SportsGruidOEM Gasket Compatible
I purchased this product because I needed it for the installation of a SportsGruid external Slip-on Silencer.
If you try to reuse them, it is safe to purchase new ones as they are RiskLarge and will be damaged and collapsed.
It is a conscientious product that is compatible with HarleyOEM Gasket and the price is definitely lower without feeling any difference in quality.
View detail
A truly versatile product
I also use it to put together PC wiring. It is sold by piece, which I think is quite rare, so it is a recommendation for those who want a few! View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Thank goodness for OEMAir cleaner box support.
I used this on my 2000 883XL1200C SPORTSTER 1200. The air cleaner element is easily dirty from the inside due to the engine oil from the Breather, and the one before the replacement was sticky. Even so, I don't feel any deterioration in performance, but it still feels good to put on a new one. Also, I think it is good that the new Sponge part is stiffer and can be fixed firmly. I think that there are few users who use the old type and Normal air cleaner, so it is nice to have a new air cleaner element at a relatively low price. View detail
As fuel pump piping in Fuel Tank
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump built into the tank, and the rubber hose connects the fuel pump to the piping in the tank that goes to the fuel cock.
I was going to use AN-BU cloth-wrapped hose, but when I soaked it in Gasoline as an experiment, I discovered that the adhesive-like paint that holds the cloth in place was being attacked, so I decided to use this high-performance hose.
As you have already noted, the quality of the Hose is superior to other Hoses.
Fuel Hoses sold by top brands such as DAYTONA, KITACO, and Posh are of course safe to use and do not easily crack over time as inferior Hoses do.
Therefore, for ordinary use, those hoses that are easily available will suffice.
However, if they are used as they are for years, or if they are used in such harsh places as tight bending, passing through places with great heat, or constantly exposed to direct sunlight, they tend to become Pushing stiff.
When you go there, this Hose is different.
It is the same hose that EuropeManufacturer uses in the engine room of a car, and we know from experience that it does not lose its flexibility even in the toughest conditions.
In any case, the quality is not hampered.
I used AN-BU's cloth-wrapped hose for the parts visible through the gaps in the Frame for visual appeal, but if there is no such reason, it is best to use this hose for all of them.
At least the Trouble caused by Fuel Hose should be wiped out.
View detail
Fits: HARLEY-DAVIDSON Most Harley HSRs using CVCarburetor and EFI, as well as Carburetor carburetors according to the CVCarburetor Air cleaner mount.
I installed it on my XLH883.
I purchased this product to use on my HarleyDavidson XLH883.
The price was reasonable and the installation accuracy was excellent.
One complaint is that the Chromium Plating has a strong Shiningly feel to it, which is good for the current XL1200C SPORTSTER 1200, but a little too bright for my older, rougher 883.
I think it would be great if there were also types such as Matte Black.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
OEM and same as etc. products
The HarleyOEM Snap ring was rusted out so I bought this product instead.
The impression is that it is built to be quite rigid, just like the OEM.
Snap rings are inconvenient because you need a special tool to attach them, but they are useful because bolt etc. will fall out if you don't wear them.
I am very satisfied and will try to buy this product again next time.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily
Exhaust System Replacement
Used for Exhaust System replacement. View detail
I appreciate it in many ways.
This is a product that I always use for 150mm.
This is my first purchase of the 200mm, and it serves not only as a Tie Band, but also as a Large Band to adjust for free shipping!
View detail
Fits: HARLEY-DAVIDSON Universal
Millimeter but dare InchHose
When I installed an oil cooler on my XR250 using a universal type hose, I used a cloth mesh hose that I had on hand and when I installed it, the hose on the side where the OEM pipe was cut slipped out and I had a terrible time.
So I looked into using a stainless mesh hose that is close to the exhaust pipe, heat resistant, low expansion, and reasonably priced.
The Hose is pretty tight to install, but I looked at it with Idling for 30 minutes and this time it was Large sturdy.
Now we will be able to go out for a real test run.
It also fits tightly into the M8Banjo.
If you measure and buy in the length you need, you can use it without waste.
View detail
Indicator bulb out of service.
It was used due to a broken bulb in Indicator.
It's working fine
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON S&S X-WEDGE Engine
In preparation for vehicle inspection
The gasket of the exhaust pipe had not been changed for decades, and since it was rare to remove the exhaust pipe, it had been overlooked. As expected, the Gasket had not been changed for decades, so it had almost lost its function. I have to do a thorough check once in a while. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily
FXDC DYNA SUPER GLIDE CUSTOMExhaust pipe replacement
I reuse it twice or so, but it gradually loses its elasticity due to rust, etc., so I replace it. View detail
Easy to grip!
[How is it used?
busy
Was the one you received as per Image?
Street Image
Was the installation difficult?
This was my first time replacing a lever on a Harley, but it was easy since all I had to do was pull the pin.
How was your experience with it?
I had the impression that the thin one was easier to grip than Harley's thicker Lever.
[Included Parts:were they on?
Reinforcement Spring
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
important point
⇒Pivot pin is hard to pull out without a tool.
View detail
On a ball run out.
I bought this for replacement because the bulb was out!
It was fixed normally!
View detail
Wiring cohesion is easy
The light case was organized and assembled securely.
I also used it for framesetc.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Pimping is not possible, but the cosmetics are good.
I purchased this product because OEM is expensive. As other people have commented, the hole where the cone enters on the lever side is full of BALI and needs to be corrected by Fileetc. However, considering it as a consumable item, the cost is good. View detail
Fits: HARLEY-DAVIDSON Universal
Required for MooneyTail.
I used it on a Kawasaki 250TR Tail lamp (MooneyTail). It works fine, but it interferes with the lens unless you use a short bulb. I bought a regular bulb without knowing it and had to buy a new one. View detail
Meter Bulb
Meter Bulb went out so I replaced it. View detail