Reviews
If it's just ChainMaintenance or Wheel cleaning.
If you don't do any Tire changes or other work, it's an outstandingly stable STAND.
Chain cleaning is so much easier now.
View detail
Products for peace of mind
It is a manufacturer's product and a safe product. The price is also high.
I have something like Manufacturer unknown, but to be honest, the usability is not that different (at Mini bike level). The paint is not strong, so if you hit a hard object, you can easily get a wound.
View detail
Race ish
Speaking of STAND, J-TRIP.
But if you look for it, you will find it in PinDrill.
I decided to go with this one because of its reliability.
It is necessary for the maintenance around Rear.
ChainMaintenance is a breeze!
View detail
In Maintenance
Chain and Wheel cleaning is now easier.
This is Recommendation because it also increases work efficiency.
View detail
welding failure
I have welding quality control qualification WES. There are two defective weld pits, and it is painted without repair. The company name and "made in Japan" are written proudly. I wonder if they are not ashamed. View detail
We need it.
I try to put STAND on it from day to day to prevent it from falling over. Of course, in the maintenance scene, items essential, and is useful. I cannot let go of it any more. View detail
Safe and reliable JAPAN
I thought it would be good to have for chain replacement, cleaning, adjustment and oil change.
Especially since my Motorcycle doesn't have a Center Stand and I thought it was a must have!
It can be lightly applied STAND and can be used easily.
The stability is good and you can work without feeling uneasy.
Doesn't bother me, but the paint peels right off where it touches the ground.
If you're worried about it, you might want to cure it.
View detail
I'm glad it's Chainetc.Maintenance.
When purchasing, confirm the operation in the past video.
No problems with tipping over during operation, which was a concern.
Great for chain cleaning, lubrication, wheel cleaning and more!
I was worried about rusting from the paint peeling off during use.
Cured with Spiral Tube.
View detail
Maintenance is easy.
It is very easy to do maintenance on the motorcycle.
Easy to lift up and release.
You can't lose anything by purchasing it.
View detail
Excellent
My MT-01 with 260kg of weight was crushed by the largest stand of a certain Astro Products at the first shot.
It was incredibly easy and effortless to get up there in comparison.
I should have chosen this one from the beginning.
View detail
It's not like the cheap stuff around here.
I've been using cheap STAND, but the operation feeling is too heavy.
I took the plunge and bought the JTRIP, although it was a bit pricey.
Basically, it uses Lever's principle, so the amount of Lift is the smallest value.
This STAND that can be used has a light feeling of operation even in Short Type.
Long would be even lighter.
I also think that the wheels contribute to the lightness of the operation.
It runs very smoothly.
Cheap STAND has a large shift and the shift amount is not adjustable.
The operation feeling is very heavy even in Long Type.
It is also very rigid and very easy to use.
If you buy something once, you can use it for a long time, so it is better to buy a good quality thing from the beginning.
I think it's a good deal.
View detail
Unexpectedly necessary! It's so handy to have!
Grom For maintenance.
I think it's a solid product.
Plating is Cool
View detail
A sense of trust that we have been building for a long time
I bought my first one over 20 years ago and hadn't driven it in a while and
I haven't bought one of these in a long time because I used to ride off-road motorcycles.
The impression of the shape has not changed at all, but at that time, the Swing Arm
For people who only use it occasionally.
The moment I put it on was very scary. Compared to that.
I am amazed at how easy it is to have such a dedicated Hook and Roller.
There are several low-priced ones available these days, so it's rather expensive.
This is a manufacturer that has been producing for a long time, so there is a sense of trust.
It is also safe to say that there are plenty of Option and Size
I think the pros and cons come down to this.
From now on, the front stand will also be J-TRIP.
View detail
U-shaped hook
I know it's a series of pitches, but I installed the RIDEA RIDEA Stand Hook yesterday and used it with a U-shaped hook.
It's more obvious than Swing ArmType, but it's totally stable.
However, it interferes with the bolt for hook fixation when the shaft is removed.
I removed the Bolt at that time because it won't come off once it's fixed in STAND.
U-shaped hooks can be used normally, so this is more PointUp than the last one.
But I still think it's too hard for a car with a lot of weight.
View detail
It is easy to use, but if you want to use it for a long time, you need to put some thought into it.
L-Shaped Receptor 1 and Quantity on a '14 MC41 CBR250R:It is used in the set. The height of the tire is just right with the adjustment hole in the middle.
It is a replacement for an old maintenance stand without a roller, and after deciding on a Daytona maintenance stand, I bought this one in order to get the peace of mind of a standard rather than a cosmetic one.
At a glance, the exterior texture of this model appears to be solid and solid with the necessary reinforcements in the required areas, however, there is some roughness in the paintwork of the welded joints, etc., which are in the shadows, and the paintwork of the weld spatters.
There are several different colors, but I choose red etc. for maintenance products to prevent accidents from happening.
The feeling of use is very good and Smooth itself without any difficulty at all in STAND-UP and STANDDOWN because it is a big talk that the ease of use is studied and improvement is repeated even by the Homepage.
I'm used to playing STAND without Roller, so I was surprised at its ease and smoothness.
Raising and lowering the 250cc Full Cowl is not difficult at all, as long as you follow the official procedure.
The stability after lifting it up is quite impressive and it doesn't seem to come off when you shake it hard.
From here, I'll introduce my own anti-Rust measures to make it last longer.
First of all, to solve the problem that the paint on the Frame of the part that touches the ground peels off immediately and Rust comes off from there, I cut the cat wall scratch prevention sheet sold at a certain 100-yen shop and put it on the width of about 3cm. (See image 2)
If you heat it up in a dryer, it will not wrinkle easily and you can apply it well.
It is a Recommendation because it is cheap and does not adversely affect the feel and stability of the product because it does not become thicker after being applied.
In addition, the PriceTag is stuck to the body and is hard to remove, but if you heat it up to GunGun in Dryer, it will be easy to remove it without any glue residue! (See image 3)
The rest of the year is a regular occurrence. (Especially after washing the car, etc., and after any work that uses water.) Coating the surface with Silicon sprayed Dustclothetc.
Be careful not to get on the Rollers.
As a general comment, things are well done and highly rated by those who use it, so if you want a sense of security, you can recommend it.
The Daytona product is better in terms of cost, so I think it's a good choice for your budget and use.
(Because Daytona products are not recommended for use in storage.)
View detail
Wow that's cool
We bought it to use in the garage as we moved from the Apartment to a detached house. Since we will not be able to move it during the winter, the Tire has become easier to maintain and prevent deformation.
And it's cool.
View detail
It's not easy to use with Swing Arm.
I bought it for the MONKEY125.
First of all, one hole in the Button bolt with a hole to stop the Tire was filled in.
I managed to install it with Pliers across the head.
I didn't have a Stand Hook, so I fixed it to the Swing Arm, but it was slippery and slippery.
In addition, it's not very strong or bouncy.
I don't know how much the Stand Hook & U-Shaped Bracket will improve it.
I don't think it's useless for heavy duty vehicles as even MONKEY is bendy.
It's priceless.
View detail
If only it was a little less expensive.
This is a good quality product. I bought it because I found information that the XANTHUS is already working.
Anodized color hooks are available from the same manufacturer for installation on the car body, however, the beautiful anodized color will peel off miserably as it hits the receiver, so countermeasures are necessary.
I think the only MinusPoint would be if it were a little cheaper in terms of price.
View detail
Fits: その他 , YAMAHA V-MAX 1680, DUCATI SPORT1000, DUCATI PAUL SMART1000LE
I should have bought it sooner!
PURPOSE OF PURCHASE
Purchased for maintenance on my Ninja1000SX.
Reason for purchase
The Ninja1000s have a swing arm shape that is not suitable for using a V-brace, even though it has a maintenance hole, which would damage the swing arm during work. However, it is not compatible with Kawasaki OEMRear stand, so I had to buy STANDBody.
Reason for Brand Selection
The BrandImage, the abundance of Options, the color variations, and most importantly, the lack of compatibility between OEMSTAND and Attachment.
[Impression]
After opening the package, you must first assemble the Roller to the Body.
For some reason the Instruction Manual was not attached. Since the number of parts was not insufficient, it assembles.
Since there was no Construction Manual this time, I decided to do what I could.
The Roller is fixed to the body by using the M8 Bolt instead of the axle. Apply anti-looseness medicine to the Bolt and a little grease to the Roller's bearing. Put the collar on the Roller and assemble it.
Compared to the OEM STAND, I was able to lift up with light force, which made me a little happy.
The size of the wheel diameter is larger than this one, but the difference is so big that I wonder what the weight was until now.
Or should I say, a rice cake maker, I should have bought it sooner!
Requests for improvement to the Manufacturer
? Bolt is the axle of the Wheel, so it's better to use a half thread instead of a full thread to reduce the rattle.
I'd like to see the accuracy of the Attachment insertion slot as it is a little annoying.
View detail
It's still J-TRIP, easy to use.
Front has been using J-TRIP for some time now.
Rear is Chinese Material:I used to use Aluminum, but it is a change to Short Stand of J-TRIP because Frame is obstructive to be Large.
Large size, which does not interfere with the use of the machine, and it is easy to raise and lower the STAND.
View detail