Reviews
It was easy.
This is my first Roller stand.
I decided to do my first ChainMaintenance and bought it.
When I purchased the product, I watched a video on how to use it and felt comfortable purchasing it.
When I received it and actually used it, it was surprisingly easy to use.
However, I was more afraid of removing the STAND.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Good stand!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Lightly raised.
It goes up surprisingly easily.
The first time I did it, I didn't always notice if it went up in time.
Since we do not exchange Tire, this is sufficient.
View detail
Great stability!
Anyway, easy installation. Lever length is just right.
A 200 kg Large Motorcycle can also be easily carried.
Four-wheel Tire and sturdy Chassis for great stability.
View detail
It is built with outstanding reliability.
It is made in Japan and has excellent stability.
The price is high, but it is better than using STAND, whose strength design is not well understood.
The L and V receptacles are sold separately, so you should use them for your own vehicle and application.
My vehicle is a KTM, so I bought and use the ShortV receiver.
When lifting, it is easy to place a piece of wood under the vehicle's Side Stand, keep the vehicle as upright as possible, and slide the Roller Stand under the vehicle in an image.
If you are not familiar with it, lift it carefully so that the receiver does not come off.
I think that up to 180 kg or so can be pushed in and STAND applied with their hands without using their feet.
View detail
Short low ler takes up little space.
The lightness and ease of handling are impeccable. I am satisfied.
I use it on my Racer, but it is also useful when I carry it on the Transporter because I can hang it on my STAND.
View detail
It's safe to say that it won't come off.
As the name suggests, we believe that first-timers can STAND on it.
The biggest problem with stand hanging is that the stand may slam when hanging or removing the stand.
The Axle Shaft is hollow, but this product does not have that flap, so you can concentrate only on not knocking over the Motorcycle, which makes the Large change easier on your mind.
I initially tried to use a rear stand from another China product on my 212 kg motorcycle, but it wouldn't lift up at all, so I bought this product.
However, since the Chain Tension adjustment does not allow Axle Shaft Access, I think you will need a Bracket for the L shape or Hook so far.
The quality of this product is very good because there is less shock when lifting up and taking off. I think the quality is very good.
View detail
I like the CHIC Black!
Familiar with Maintenance Stand JTrip." The Short lowler Rear Stand of the
I used to use Long Type, but I wanted a compact Short Type, so I replaced it.
such as the V-supply. "Taken." I chose this product, which does not come with a receptacle, because I already have a I was also happy to see that this product comes in a choice of Black.
After opening the package, the Roller part needs to be assembled (easy).
It's hard to explain, but I liked the texture of the Roller. It's easy to use and seems to have a luxurious feel.
Naturally, it required more force to Lift up compared to the Long Type.
I liked that it rose to a good height with the lowest height adjustment.
If you have a large work Space or storage area, you may want to use the Long Type.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Lift up is easy
Purchased for maintenance and winter storage.
It is used with Hook with ZETA Spool installed.
I have considerably less strength than others, but I was still able to Lift up.
I couldn't stand on the car body Left Side, as it is generally called, and stand on my feet...,
I crouched down behind the vehicle and held the STAND with both hands and lifted it up a couple of times and it was stable,
Women and those who are not very strong can use it safely.
The initial setup is a bit cumbersome, but once it is set up, it is easy to use as is.
It will be quite useful for Oil replacement and ChainMaintenance.
View detail
JTrip Stand for Beginner
At first I was worried about being able to stand the STAND without tipping the Motorcycle over, but it was easier than I thought it would be. I wish I had purchased this product earlier. View detail
Definite shopping
Stable J-TRIP.
Used in conjunction with V receiver 1.
Impeccable.
View detail
J-TRIP Short roller stands
I used it to replace the Exhaust System on my Z900rs, and in combination with the V-shaped Hook, I was able to stand it up by myself without any problem. The price is not cheap, but it was a good decision to buy a new one from Webig because you can't find used ones on Yahoo Auctions or Mercari, and even if they are listed, they are full of rust and the price is high for that. View detail
When in doubt.
I was looking at APRO and DTONA products, but the quality was not good enough.... So, I decided to buy one from JAPAN because of its high price but reliability. My car did not have a hook bolt, so I bought one separately. Installation was easy.
When I tried to use it, the Mud Guard was in the way and I thought I had made a mistake in purchasing it. I thought about it carefully and realized that I had to remove the Mud Guard, and then I attached the V-receptacle I had purchased separately to the body and lifted the Rear Tire.
View detail
If it is Shinobu Sen, Limit
I use it in Shinobu Sen.
To go up, it will go up.
However, with the two Bolts that come with it, it seems scary.
I added one of my own and made it three.
After that, the Frame lock starts to work just before it goes all the way up and stops.
In this state, if you loosen the Brake slightly, it will raise completely.
But I think U-type Clamp is easy.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Questionable quality inspection of products
I received it ahead of schedule, but when I was setting it up for installation to fit my Motorcycle's size,
The Clamp's corner Pipe was not penetrating the ArmHolder's insertion hole (One Side).
I had no choice but to use a slotted screwdriver as a chisel to remove the BALI.
DAYTONA, please inspect your products carefully.
View detail
How about one for Garage?
I purchased this product for the first time for Chain Maintenance.
I was nervous when I put it up for the first time, but Quantity was there without a hitch!:Set is ready.
It is so convenient that I wish I had introduced it sooner.
I am satisfied with the quality of the product, but I have one point,
The hook part was bare gold and it looked like it might scratch the Swing Arm,
I covered it with Fuel Hose, which happened to be available.
Other companies' MAJOR products have already taken countermeasures in this area, so please check this when purchasing.
View detail
Heavy objects are easily lifted
There are many products out there, but I chose J-TRIP. It is already easy. However, L-Shaped Receptor and Small Motorcycle seem to be incompatible, so I purchased a V-shaped Receptor separately and am now using it. View detail
J-TRIPShort low ler Rear stand
I purchased this for my MT-09.
We considered cheaper companies A and D, but after reading your review, we decided to purchase JT-RIP.
Because there is no room in the length of Garage, we decided to use Short. It is also stable enough.
It helps with maintenance, but if it were cheaper, I would have no complaints.
View detail