Reviews
Dream rear stand
Very well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this product View detail
I think it looks sturdy and has good cost performance.
The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands.
View detail
Unexpectedly necessary! It's so handy to have!
Grom For maintenance.
I think it's a solid product.
Plating is Cool
View detail
It's a must if you're going to do the maintenance yourself
First, look for a Type that has a Bobbin attached to a Swing Arm and lifted by a Y-shaped Arm But I couldn't find anything to fit the groms This Rubber arm lifted Type is simply a Square Type bar with Rubber is wrapped around the Swing Arm (which is also square like a grommet) You only need to lift it up by hooking it on the It is not
In terms of actual use, Quantity:Pair (for Left and Right) You don't have to worry so much about positioning the Once it's up there (if the ground is hard and flat, we're concrete), it's very stable and First of all, stand upright so that you don't feel like you're going to fall down, and then you can do the usual things like cleaning the Chain and lubricating it It is already useful for maintenance and installation of custom parts I'm there We're still very new to the process, but if you're going to start working on it, this is the kind of Rear You should definitely get a stand, I think you should get a STAND to lift your car upright and keep it upright It's kind of nice just looking at them!
View detail
Satisfaction over function
It had been wanted for some time, but Motorcycle was knocked down by the typhoon and Large repairs were required I took the plunge with Timing that I needed and bought a front and rear STAND
It's not surprising that the ease of maintenance is improved A sense of doing is a great way to get upset
HondaCBR250RR (MC22) 、GROM (JC75) It is used in
What made you decide to buy?
In addition to the above, we selected Plating because of its appeal
Image to match if the color is a Manufacturer vehicle that has drilled The Plating was the most appealing to me, although it seems to lift my mood with
How was your experience with it?
The ability to easily jack-up and maintain at any time is even better than I expected
The ease of washing the car alone makes a huge difference
Chain cleaning and grease up is now easier, so I have to do it more often than before Maintenance
The ease of maintenance and the range of maintenance that can be performed is increased It was very satisfying to see a motorcycle on the stand
That's what the Motorcycle hobby is all about!
View detail
It's a must for maintenance
Of course, the oil exchange is used in HondaGROM It is useful in Maintenance, Chain exchange, and Sprocket exchange
The stability is also safe to use
View detail
Easy to use
I used cheap products of Manufacturer unknown, but because it was hard to use, I replaced it with ETHOS.
good point
Since the rigidity is solid, even if the car body is shaken, it does not go guyagguha.
The thickness of Pipe of the handle part exactly grasps exactly and it is easy to put in force.
The movement of Caster is good and it is easy to get in under the car body. * If it is cheap, it will not move if the weight hangs on the Caster, or it needs considerable power.
The price is just right..
A bad point
Because the handle part is long, it is easy to put power, but Space is also required for that
View detail
With Affordable Size
Purchase for Grom without Center Stand.
Thanks to a simple structure and a quadruple Caster with Bearing, it lifts with a light force.
View detail
Why did not you buy it soon!
Purchased like Hara 2.
Until now, I used Side Stand and stayed on the wall
Let me hang it and remove Rear tire
I wish I could buy it sooner.
Large type has for Hook bolt, but it does not match
So it was impossible.
I use mind more than HookBolt type,
If Hara 2, the car body is also light, there is no problem even for one person.
To do.
Pretty Maintenance has become easier.
In addition to tackle Front and Rear suspension
Is it Jack?
View detail
Ideal for Maintenance
I think that I did a good shopping.. Cost performance is also good, even though Side Stand has no problem, I use this easily and are using it for Maintenance and Custom easily. View detail
I am satisfied..
It is easy to use as usual. It looks pretty good too. The Rubber of the Mount part is also thick and relieved.
Pipe diameter is also large and secure. I do not feel dissatisfied, but I wish it was a bit cheaper ...
View detail
There is no choice because there is only this!
While thanking you for making it exclusively for DREAM 50, some points.
I am using it when exchanging Oil or Maintenance of Chain, but I need a little courage and hang to be able to ride alone.
After that, according to other people 's Review, Spolcket' s Bolt interfered quickly, Plating half Pipe (Protective Pipe?) It is easy to peel off.
But I am thankful that you have sold it with exclusive items after all.
View detail
Hang may be there
I feel a little unstable when I raise it compared to receiving L-Type.
It will stabilize once it goes up,
If you do not plug straight in to the car body
It may be dangerous.
Texture etc etc. Is very nice.
View detail
Easy to use!
J-Trip etc was also a candidate, but I liked Chromium Plating and liked Ethos Design's items so select this.
It can not be used within my narrow Transporter because of Long Type, but it is very easy to use other than that.
It is cool to use together with Front stand of the same color!
View detail
Best product
I'm using Color type, build is same.
Small Space. (It can be lifted by hand with one hand support)
Thanks to Caster I can move and I can cut Handlebar.
Quantity : Pair (for Left and Right) Because Arm has high degree of freedom of direction, positioning is also easier.
View detail
Work efficiency increases to Large width!
I use an old model, but it is handy because I can very easily do Lift up.
Actually alone, I'm Lift up ZEPHYR 1100, but until now there is no failure. However, because Roller does not turn when used on the ground, some power is required.
View detail
Without Center Stand car necessities
Chain Maintenance, Wheel Cleaning, Appearance Fun - - - I am variously active in Large. Actually I was looking for Y's Gear made, but I made a choice with production ended.
The Pipe diameter of Body is good from the viewpoint. I think that the rigidity is perfect. By the way it is a combination of Hook bolt + VHook.
As soon as I come up with it, I will run it as soon as possible, so I'm typing, so I do not think about time and work in the middle of the night, but I'm hanging on by myself alone. But if you prepare a little thing, it is very easy. In the case of my author, I lay a wooden board under the Side Stand and hang the car body in a state close to horizontal. When unloading, put Side Stand out and put the board on the bottom, so that the Side Stand will ride on the board as soon as the STAND goes off. If you get used to it you will not have to worry about knocking down the car.
Because it is VHook, in addition to having less contact surface with Hook bolt, there are things that Bearing is used for Caster, so there is no need for forces to take off and it is possible to do Smooth. Body has a reasonable weight, if you dare say that degree.
View detail
There is a heavy feeling, it seems to last long.
I got lost by Ethos, Battle factory, JTrip, but decided to Ethos with a solid feeling with Stainless Steel. As a result, there was no regret. Because R25 is light, you can put a STAND on alone while fixing Tail cowl with Left hand. Exclusive Design's Battle factory looked nice, but given the latter things, I thought that it would be preferable to use width adjustment because I could also use it for my friend's Motorcycle.
JTrip is not bad, but as I looked at other people's reviews it seemed rusty. Lever is long, Lever is easy to work up, Race ish looks as well, but be careful as passing through the back of Motorcycle as it blurs, as it may stumble (Lol)
View detail
Is it just for keeping it a little?
I am thankful just to have made MaintenanceSTAND for DREAM 50
As pointed out by the former person, the receiving Rubber sheet and Plating's half Pipe can be removed immediately
Still useful for maintenance around the back
Is it for the people who decorate the making?
By the way, the thing made by Honda access is the same thing that the width is a little narrow and turning the rear wheel and Sprocket's Bolt hit and it is difficult to turn around
View detail
It purchases in order to maintain by itself. It becomes easy to give cleaning, adjustment, etc. of the Chain to this [ this ] by using the Maintenance stands. hanging from the J Trip's thing, since V character Hook of the Ethos
It purchases in order to maintain by itself.
It becomes easy to give cleaning, adjustment, etc. of the
Chain to this [
this ] by using the
Maintenance stands.
hanging from the
J Trip's thing, since V character Hook of the
Ethos has short one side although compared also using the
J Trip's thing -- easy --
-- further -- a Caster's favor --
-- the Lift up was able to be carried out easily.
--
-- I think whether since the result of goods is beautiful, there is also any pleasure to
see again.
--
-- it was a dramatically satisfying article.
View detail