Reviews
Required by Maintenance/Circuit.
If you do your own maintenance, you will need to do it,
I think the longer one can hang STAND with lighter force.
The construction is solid and secure.
I think it will last a long time. It's a little expensive, but...
View detail
J-TRIP J-Trip JTrip Short low Ra Rear Tan
We used to use a certain A0-tro product, but its strength was not good enough, so we were considering J-TRIP, although it is more expensive.
After purchasing the product, I am very satisfied with the stability and the ease of raising and lowering the product on a Large Motorcycle.
View detail
Convenient
I bought it for Chain refueling and washing for Vehicle. View detail
I am satisfied
The packaging material has a Cigarette smell as others have mentioned? If JAPAN is a feature of this product, I would like to use it.
The body is solid and even a beginner can handle the assembly. I wrapped it with rubber mat to protect the installation area. I haven't put my motorcycle on it yet, but it fits EXACTLY in a tentative fit. The height is the lowest position in the 3 levels of holes, and the width is the widest position, which is almost the width of the largeest hole. There is still room to spare.
View detail
Short low ler takes up little space.
The lightness and ease of handling are impeccable. I am satisfied.
I use it on my Racer, but it is also useful when I carry it on the Transporter because I can hang it on my STAND.
View detail
It's safe to say that it won't come off.
As the name suggests, we believe that first-timers can STAND on it.
The biggest problem with stand hanging is that the stand may slam when hanging or removing the stand.
The Axle Shaft is hollow, but this product does not have that flap, so you can concentrate only on not knocking over the Motorcycle, which makes the Large change easier on your mind.
I initially tried to use a rear stand from another China product on my 212 kg motorcycle, but it wouldn't lift up at all, so I bought this product.
However, since the Chain Tension adjustment does not allow Axle Shaft Access, I think you will need a Bracket for the L shape or Hook so far.
The quality of this product is very good because there is less shock when lifting up and taking off. I think the quality is very good.
View detail
I like the CHIC Black!
Familiar with Maintenance Stand JTrip." The Short lowler Rear Stand of the
I used to use Long Type, but I wanted a compact Short Type, so I replaced it.
such as the V-supply. "Taken." I chose this product, which does not come with a receptacle, because I already have a I was also happy to see that this product comes in a choice of Black.
After opening the package, the Roller part needs to be assembled (easy).
It's hard to explain, but I liked the texture of the Roller. It's easy to use and seems to have a luxurious feel.
Naturally, it required more force to Lift up compared to the Long Type.
I liked that it rose to a good height with the lowest height adjustment.
If you have a large work Space or storage area, you may want to use the Long Type.
View detail
J-TRIP Short roller stands
I used it to replace the Exhaust System on my Z900rs, and in combination with the V-shaped Hook, I was able to stand it up by myself without any problem. The price is not cheap, but it was a good decision to buy a new one from Webig because you can't find used ones on Yahoo Auctions or Mercari, and even if they are listed, they are full of rust and the price is high for that. View detail
If it is Shinobu Sen, Limit
I use it in Shinobu Sen.
To go up, it will go up.
However, with the two Bolts that come with it, it seems scary.
I added one of my own and made it three.
After that, the Frame lock starts to work just before it goes all the way up and stops.
In this state, if you loosen the Brake slightly, it will raise completely.
But I think U-type Clamp is easy.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
It was above my imagination.
I use it on my Z900RS. L-Type Arm hangs behind the Swing Arm for easy lift up.
If you are working alone, it is easier to work with a piece of wood under the Side Stand as it is close to parallel.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA AdjustableSTAND
I use it for REBEL 1100, but I feel uneasy when using Single Body because of its heavy body.:Once the Set is complete there is no problem. I am currently using it with STAND in the Front tire lock. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Just right for REBEL 250
I used it on my REBEL 250. It was very useful for my daughter, who just got her license, to practice clutch and gear changing, and for maintenance afterwards. View detail
During maintenance such as Wheel, ChainMaintenance, etc.
I purchased Maintenance Stand for the first time and used it for the first time.
To be honest, it was my first time. Will it lift properly?" And "Why don't we take down Motorcycle?" I was worried about a lot of things, but it was surprisingly easy to Quantity:Set is ready.
It may depend on the person, but you can put something thicker on the Side Stand from the beginning to keep the Motorcycle straight and Quantity.:I think it would be easier to Set.
I am concerned that the Gold price is too high and that the Hook will be damaged because it directly interferes with the Hook, which is unavoidable.
View detail
Additional purchases
I purchased the Hook originally for maintenance etc., so I purchased only the Body.
I am satisfied with it because it will be useful for Large change if it is available.
View detail
A must for maintenance
First of all, note that Body alone cannot be used, but requires the receiving Bracket.
Also, some receiving brackets may not be used for certain types of vehicles, so make sure you buy the right shape for your motorcycle.
The Rear Stand is essential for various maintenance around the Rear area from Chain cleaning, and it is also necessary to keep the Rear Stand upright for work using the Front Stand.
NarrowSTAND would have been better for 250ccClass because the Tire is not thick enough.
I used to have NarrowSTAND, but it is slightly more compact in size.
There are no complaints or dissatisfaction with the quality and usability of the product, which is the quintessential J-TRIP.
Gold amount is slightly higher than others, but I have never heard of J-TRIP's STAND breaking, so I think it is possible to buy it for a lifetime.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
With a sense of security.
A cheap Chinese-made product can be bought for about $2,500, but the Motorcycle you are lifting is over $2,000,000.
This is not a place to be stingy.
It's a small price to pay considering the cost of hundreds of thousands of parts when they fall down.
However, the U-shaped Hook fails because there is no Coating and it is in the Swing Arm.
I put a scratch in it.
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
I'm concerned about rattling in the adjustment area.
Although it is a Short Type, it could lift about 220 kg without any effort.
I think Large people will choose Bobbin type, but VPlate is more stable and easier.
I wonder if they dare to do so to make it easier to match, or if the rattling of the adjusting section is Largekiku rattling.
If you bite a piece of wood on the Side Stand to keep it almost upright, and then stand on the Right Side and hang it with your foot, it will not rub off.
Once purchased, it will be semi-permanent. It will expand the scope of maintenance, so if you are not sure about it, buy it.
View detail
I finally bought it.
I finally bought it.
I had been hesitant to buy it because of its high price, but now that I have saved up my points, I bought it.
The quality of the product is good and satisfactory because it is from Japan.
Assembly was easy and we are looking forward to maintenance.
View detail