Reviews
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
Fits: HONDA MONKEY, HONDA APE, HONDA CT125CT110 HUNTER CUB, HONDA XRMOTARD, HONDA CHALY, HONDA DAX
Rear Maintenance Stand NORMAL
Rear Maintenance Stand NORMAL
I could not use it on my Grom JC92. The description reads like it would be compatible with NORMAL, though.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
Perfect for the MONKEY125!
It is essential for maintenance. I'm glad it's cheap. Durability is unknown. View detail
U-shaped hook
I know it's a series of pitches, but I installed the RIDEA RIDEA Stand Hook yesterday and used it with a U-shaped hook.
It's more obvious than Swing ArmType, but it's totally stable.
However, it interferes with the bolt for hook fixation when the shaft is removed.
I removed the Bolt at that time because it won't come off once it's fixed in STAND.
U-shaped hooks can be used normally, so this is more PointUp than the last one.
But I still think it's too hard for a car with a lot of weight.
View detail
It's not easy to use with Swing Arm.
I bought it for the MONKEY125.
First of all, one hole in the Button bolt with a hole to stop the Tire was filled in.
I managed to install it with Pliers across the head.
I didn't have a Stand Hook, so I fixed it to the Swing Arm, but it was slippery and slippery.
In addition, it's not very strong or bouncy.
I don't know how much the Stand Hook & U-Shaped Bracket will improve it.
I don't think it's useless for heavy duty vehicles as even MONKEY is bendy.
It's priceless.
View detail
Used for MONKEY, DAX, CHALY, etc.
The picture is a lifted state with MONKEY8InchSpec.
The Tire is about 10cm up.
It's stable enough for lightweight vehicles and easy maintenance.
View detail
Used for MONKEY, DAX, CHALY, etc.
The vehicle is so light that I don't think it would be a problem without the Roller.
I didn't care for the color so I went with Red, which is in stock.
I'll have to wait and see how the moving parts of the receiver hold up.
In the meantime, I don't regret my purchase.
View detail
A little more quality control;
First things first
The construction is solid and normal
Cosmetically, rave reviews
Just paint & hellip;
There were places where it looked like the paint had been partially over-sprayed and cured in a foamy state, and I inadvertently My hand hurts when I grab it there
I thought I had to apply Paper to the paint from new to even it out
The part of Swing Arm ride, the paste is yellowish GBond The glue of the
Is there any other way, or at least don't stick out?
The Handlebar part that can be held by hand when standing is also a good idea, but it's a bit pricey If you think it's appropriate
View detail
Safe during maintenance!
I used to use two Uma for Vehicles, but they were not as stable as they could be
I have been able to maintain this STAND with peace of mind since I purchased it I should have purchased it sooner!
When you are not driving your car, you can put it on this STAND and look at your car to see the atmosphere in the garage I think the first time I saw it, I was able to buy it I can buy it for 1299 yen in real terms because I used webike's Point, and it is very I was grateful for the
This STAND is a mini type, so you need to lift up your rear and put it on STAND So the body of GORILLA is light, but the body of the GORILLA is caught in Smooth You may not get on the
View detail
I think this quality is good for the price!
I think the quality is good for the price
But it seems to be too much for a car with a large chassis
Just right for MT-03
Brake, Chain, Sprocket, etc
I think it's necessary for those who make maintenance better
I'm not using the Front
It looks fine
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
It's good and well done for the Gold amount
Maintenance for MONKEY125, good height, chain and Tire, no Center Stand for foil maintenance Motorcycle Necessities View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
The price is reasonable, well built and satisfactory
I use it for groms with the width as wide as possible, but it's well made and easy to use for the price It's easy
It's good strength and doesn't wobble
View detail
Price 〇!
I bought this for the Monkey engine replacement schedule in the spring.
I think that it is also a big success in the future Maintenance.
The last point price was also a little cheaper and the shipping cost was cheap and it was profitable.
View detail
Cheap but not usable
It is too large for Mini bike
We used it for NSF 100 but it can not be used.
Front stand can not be used for Full cowl at all.
So welded and shortened.
View detail
Can you use it? - - -
As Front stand, I used it with GSX-R1000.
Especially it can be used without problems.
I do not have much opportunity to use it so I do not have a problem, but if it is used a lot, it might be better to buy a thing with a slightly higher price range.
(Product information)
The price is cheap, "MADE IN CHINA" There is also thing called, overall is not good to make.
At the time of opening from the stage Ball box, the paint was rubbed or the handle parts of Screw (resin) There was a problem such as being broken. As Screw will not be usable, Stainless's Bolt (M8) We exchanged for.
Also, because the processing accuracy is poor, it is also difficult to assemble. We recommend that you paint Grease and assemble it where the Gold genuses touch each other.
View detail
Functional aspects are fine, but ...
When opening the package, there was already rusted part, but in actual use, the functional side is no problem. Although the details such as the Plating part and the price range are higher than the STAND on the top, it seems that Rust will come out in the future with cheap, but if you can divide it and use it, you can recommend it. View detail
I use it with ninja 250
Although Maintenace Stand is not frequently used, it is worried variously in Chinese cheap FR dual use STAND - - -.
But if you buy an expensive STAND, leave it to Shop - - -.
I think that it is a STAND to eliminate this feeling.
The thing itself is also solid making, precision - There is no rigidly worrisome point. It is a Level that satisfies ownership desire.
As it is, as for the ninja 250, the height is slightly insufficient, so I made a height by sticking a Rubber sheet about 1 cm in thickness to the L letter receiver.
Since the L-shaped receiving part is relatively large and firmly made, there is no loss of stability by sticking the Rubber sheet.
If you are really worried, I think that it is good to exchange it for V letter receipt, but it is solid enough to feel that necessity is not felt.
In conclusion, although it is cheap as STAND, the quality is high, I bought it was the correct answer.
View detail