Reviews
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Easy to use
I purchased the Round Type because my ST250 has a circular swing arm. I am satisfied with it and can use it without any problem. View detail
Ideas products for improved serviceability!
I saw this product in DAYTONANews and bought it as soon as it went on sale.
I had a chance to do maintenance of CRF and SEROW's LINK circumference with just the right timing and used it immediately.
This tool is very easy to work with when pulling out and inserting the Axle Shaft and using it to assist in removing and installing the Wheel, as well as when slightly changing the angle of the Swing Arm for maintenance of the LINK circumference and adjusting it to a position where no excessive weight is placed on the LINK circumference.
When the Hook is hooked and pulled forward, the height of the Wheel is raised to just the right position, and the load can be set to Free, making it very easy to work with the Bolt around the LINK.
It is good to have one if you have many opportunities to service the rear wheel area.
View detail
Easy maintenance of front wheels
I used it to clean the front wheel and brake disc. The rotation was more sluggish than I expected, but after lubricating the roller bearings, they turned smoothly. It is very good because I don't have to move my heavy motorcycle around. View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
For stabilizing the vehicle body during operation
When working by suspending the car body with j-trip's Suspended Frame Stand, etc.
Purchased to stabilize the vehicle
Not originally intended for use, but safe to have
View detail
ChainMaintenance
For ChainMaintenance and Wheel Polishing
Very helpful.
View detail
convenient if available
Rear tires can be rotated by using a center stand or maintenance stand, but front tires are always maintained by moving the motorcycle back and forth. I have always had to move the motorcycle back and forth to maintain the front tires. This product will probably make it easier. View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
UnderFrame Stand
To OH the steering stem of RZ, we fixed it with this product and worked on it.
It would be nice if the height could be raised a little more.
View detail
better than nothing
The product will Gap depending on where it is placed. At that time, the RUBBER feet on the back will come off.
The bank angle is quite high, so even if you think you have placed it straight, it will gap.
View detail
ChainMaintenance
ChainMaintenance can now be done with ease. View detail
For Chain cleaning and lubrication
Rear wheel:Even if it is placed in the middle, it gapes due to the angle of the Side Stand, and the Chain side is difficult to work on because it is angled too much.
Front wheel:Handlebar is not recommended for use by one person, as it will break off and definitely Gap.
If I could get on it, I managed to turn the Tire with one hand.
View detail
Easy maintenance
[How is it used?
Used during ChainMaintenance of CB1000R.
Was the one you received as per Image?
As per Image.
How was your experience with it?
The construction is solid and there is no worry about it breaking.
For this price, I am satisfied.
[Points to note]
Locking the Brake of Fr is a must.
If you turn the rear tire without brake, it will be wobbly.
Also, the Rear tire needs to be turned firmly with both hands.
*One hand Slurp." Maybe it's because it's a Large Motorcycle, but...,
How did it compare to other products?
Unknown, as I have never compared them.
Other items that would be helpful
Can be used immediately after opening.
No need to reassemble the Roller to match the Tire size.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
STAND for liter machine with excellent cost performance
It's like a CB1300SF exclusive.
Since it is a collective pipe, there is no Center Stand.
It is very useful.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is like for CB1300SF to begin with.
It is a 1300 Sioux Four without a Center Stand because of the assembly pipe. I was worried about maintenance because it is very heavy and there are many stories about it falling down and breaking a bone. I have heard many stories about people breaking their bones when they fall over because they are so heavy, so I have been concerned about this for a long time. I would like to use Large stand. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
ChainMaintenance and cleaning of rear wheel wheels
Purchased for ChainMaintenance and rear wheel wheel cleaning.
Use the Front Brake Lock to keep the front and rear from moving back and forth.
Easy Lift Up Stand Round Type for rear wheels
Raise the Swing Arm of REBEL1100 is Round Type because it is round.
Otherwise, it won't hook up well.
The rest is done by turning round and round by hand.
When using the product, please do so on a flat surface.
View detail
For cleaning front wheel
Purchased for cleaning Front wheel, not used for Rear as there is a Center Stand.
After applying the Center Stand, float the Front a little and apply this STAND to the Quantity.:Set.
The non-slip Rubber is a little difficult to insert because it is more effective than expected.
It looks good for use according to the Instruction Manual.
By idling the front wheel, cleaning is much easier.
View detail
Chain Cleaning and Lubrication
I put the rear wheel on the Maintenance Roller Stand and cleaned the Chain, but the Tire was heavier than expected and a little difficult to turn. I am a beginner, but I managed to do it. View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is useful for maintenance.
I am using it for maintenance of CB750four. I have to remove the Center Stand because it is wearing the assembly tube. Before I purchased this product, I had a hard time adjusting the chain, changing tires, etc., fighting the fear of tipping over. Now I can do maintenance around Front and Rear by changing the place to hang the STAND. （The only thing is that it is hard for old people to bend down and rotate the jack with the pin spanner, although it is unavoidable due to the structure. View detail
Very useful.
I bought this for maintenance because my spoke wheel came loose before and almost caused an accident. It is very convenient. It is also useful for washing the car. View detail
Not suitable for Side number vehicles.
It is a very effective maintenance tool for vehicles without a center stand. However, if the vehicle is a side number spec. vehicle and has a SIDESaddle Bag, the handlebar will hit the SIDESaddle Bag, so you will need to remove the Saddle Bag. It is better to use a HARLEYPantograph jack such as AstroPROducts for side number cars. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It also worked with the YamahaBOLT Shoulder Bag.
Although the only model that was compatible with this product was the Rebel, I thought that it might be effective for the BOLT Shoulder Bag since the Swing Arm is round. I bought it with the intention of becoming a human sacrifice. As a result, I bought it thinking that it would be useful for the BOLT Shoulder Bag, but the Brake Caliper is located under the Swing Arm, and the stubborn Exhaust Bracket is in the way. The BOLT Shoulder Bag, however, has the Brake Caliper under the Swing Arm, and the stubborn Exhaust Bracket is in the way and the position of the Bracket is fixed. The Front Brake Lock is an absolute necessity. View detail