Reviews
Allows you to turn your Motorcycle around in a comfortable position
I bought it because I wanted to enter the garage from the front of the Motorcycle and park it, then turn it around 180 degrees for the next time I exit (I wanted to keep the front of the Motorcycle facing the garage exit side).
There is a similar product, Motorcycle Moveretc., which is used to lift the rear tire by stepping on it with the foot (by the principle of leverage), but when I tried one owned by a friend, I found that this product was easier to position myself in and moved the motorcycle stably. However, since the Side Stand is dragged, I think it is necessary to use it with STANDRoller for vehicles with LargeEngine Displacement Volume. (The same applies to the Motorcycle Mover.)
In terms of price, it is less expensive than Motorcycle Mover, and the quality is not bad, so we felt that Cost performance is high.
STANDRoller is sold separately, but the Quantity:It would have been better if it was a Set sale.
View detail
Easy maintenance of front wheels
I used it to clean the front wheel and brake disc. The rotation was more sluggish than I expected, but after lubricating the roller bearings, they turned smoothly. It is very good because I don't have to move my heavy motorcycle around. View detail
Fits: HONDA CR250R, HONDA CR125R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TE125-501, HUSQVARNA TX125
Convenient and lightweight! But low strength
Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft.
View detail
Easy maintenance
[How is it used?
Used during ChainMaintenance of CB1000R.
Was the one you received as per Image?
As per Image.
How was your experience with it?
The construction is solid and there is no worry about it breaking.
For this price, I am satisfied.
[Points to note]
Locking the Brake of Fr is a must.
If you turn the rear tire without brake, it will be wobbly.
Also, the Rear tire needs to be turned firmly with both hands.
*One hand Slurp." Maybe it's because it's a Large Motorcycle, but...,
How did it compare to other products?
Unknown, as I have never compared them.
Other items that would be helpful
Can be used immediately after opening.
No need to reassemble the Roller to match the Tire size.
View detail
For cleaning front wheel
Purchased for cleaning Front wheel, not used for Rear as there is a Center Stand.
After applying the Center Stand, float the Front a little and apply this STAND to the Quantity.:Set.
The non-slip Rubber is a little difficult to insert because it is more effective than expected.
It looks good for use according to the Instruction Manual.
By idling the front wheel, cleaning is much easier.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is useful for maintenance.
I am using it for maintenance of CB750four. I have to remove the Center Stand because it is wearing the assembly tube. Before I purchased this product, I had a hard time adjusting the chain, changing tires, etc., fighting the fear of tipping over. Now I can do maintenance around Front and Rear by changing the place to hang the STAND. (The only thing is that it is hard for old people to bend down and rotate the jack with the pin spanner, although it is unavoidable due to the structure. View detail
It is active in our Garage!
Our home-made Garage is 8ft×8ft in external shape.
There is Heat Insulating Material&OSB plywood on the interior plus a doorway, about 230cm deep.
I was going to put the 250TR straight in, but when I put it in, it is not parallel to the wall….
No Space to switch back and forth….
So, a triangular Dead space is created.
I was wandering around the Net looking for a better way and came across this product.
I thought about buying a new one, but when I looked on Mercari, I saw it for sale at a discount price, so I bought it. (It was used, so I don't mind if it had some Wound/Rust.)
How to use,
(1) Put the front wheel in deep enough to hit the back wall.
(2) Stand the car body on the Side Stand.
(3) Insert the Motorcycle Mover into the rear wheel.
(4) Raise the vehicle and push the Motorcycle Mover in with the Right foot.
(5) The body of the car is completed standing on the Side Stand!
It was a little strange to pull the Garage until I got used to it, but this product eliminated the Garage's dead space and made it possible to use the Garage more spaciously.
I'm glad I bought it
(Unfortunately, the Center Stand for ESTRELLA, which we went to the trouble of attaching, is no longer usable due to the lack of a draw allowance in depth …...)
View detail
Only a simple standing
Used in ChainMaintenance of Z900RS.
Even though the car weighs 215 kg, it can be used without problems.
But you can never be on the Chain side and turn Tire with one hand.
Since the mechanism is only a Roller, stand behind the Tire when turning it,
Must be turned with both hands.
Of course, this is much easier than Chain cleaning by moving every single push and pull.
However, it seems to take a little more effort than the recently popular side stand, which is used by lifting up the rear tire.
Would you rather buy a maintenance stand that costs several tens of thousands of dollars or this one that costs only a few thousand yen?
You can decide based on your own maintenance level.
I think it is a good product in terms of cosmetics, and the fact that DAYTONA is a reliable company is also a factor in my evaluation.
View detail
If only I'd bought sooner...
As for ChainMaintenance, until now we have repeatedly sprayed and rotated the Tire.
This is indeed hard work as you get older.
So I purchased this product, which I had been interested in for some time.
I should have bought it earlier..."
My true feelings spilled out.
The force to rotate the Tire is extremely small.
There is not much Body Gap, which I was worried about.
This reduced my body pain to 1/5 of what it was the day after Chain cleaning and adjustment.
Really, I should have bought it earlier..."
View detail
Nothing beats Center Stand
I'm having a hard time finding a motorcycle these days that doesn't have a center stand....
I considered the Maintenance Stand, but I wasn't sure about it, so I decided to go with this simplified version.
We also have EasyLift type STAND, but this one is better in that the front tire can be floated.
However, both front and rear tires slide on the roller in a direction other than the direction of rotation, so they do not turn well.
I guess I need to get used to it...
It is much better than nothing, but as the Title says, I miss Center Stand.
Also, there was a small dent on the roller.
It is good because it does not interfere with the operation.
View detail
Essential Items for American
It is useful for lubricating the chain of American style motorcycles that cannot float the rear wheel with the side stand. View detail
Chain Cleaning
I bought this for cleaning the chain and was not sure whether to use STAND or not, but I decided to use this one, which takes up less storage space. I was worried about whether the tire would turn easily until I used it, but it turned perfectly. I was able to clean the Chain without any trouble. The price is cheap and I think it is a good product. I would say it is worth the price. It seems to last for a long time. I forgot to take a picture... View detail
Convenient to have
It is useful to have it for car wash and ChainMaintenance.
It takes a little bit of strength to turn the vehicle when the body is heavy, but I was glad that I could choose the width of the Roller.
View detail
I thought it would be good for ChainMaintenance.
Purchased for ChainMaintenance
Made with reliable DAYTONA
View detail
Fairly easy to move
I used it to turn around in a tight spot and it was easy to use without much effort.
Rust is uncomfortable and difficult to move depending on the orientation of the Stand Mover on the Side Stand.
View detail
You'll get used to it.
Used on MT09, easy to use once you get the hang of it, but the price tag is too high. 10,000 or less is appropriate. View detail
Convenient
Convenient for cleaning the rear wheel and maintenance of the drive chain.
Chain can be cleaned very easily without Center Stand.
View detail
Very convenient, but also requires caution
With the Motorcycle Mover, I can easily pull my 250kg lighter machine up against the garage wall. I don't have to push and pull the machine over and over again, which saves me a lot of time and effort.
The product is well built, rigid, and beautifully finished with a high quality feel.
However, there are some points to note.
The Motorcycle stand may be paid off while the Motorcycle is being moved in conjunction with Stand Mover.
Relying too much on Stand Mover can be dangerous, and I almost knocked over a Motorcycle once.
This can be prevented by installing the Stand Mover with awareness of its orientation and moving the Motorcycle slightly upright.
Because we are moving heavy objects, there is a certain amount of danger involved. We always try to handle them with care.
View detail
It's expensive, but nothing else will change that.
The price is quite distressing before purchasing, but if it can be moved freely, it will be easy to move in and out of Garage, and even increasing the number of cars is not a dream.
With this New Model, both the front and rear wheels can be moved, allowing for effective use of space.
I saw some reviews on the old one that it still had the Edge, but I guess it's good that it's made in Taiwan? There is no Edge and there seems to be no worry about scratching Boots.
I'm not sure about Merit, which increased the number of Bearings on Motorcycle Mover to three, because it allows you to move without grounding the Bearing under your feet when pushing and pulling. I think it is suitable for those who want to stabilize the bike and step on it as hard as possible, but for me, it is useless because it increases the resistance to ground contact.
I tried to move GSX1100SKATANA which is the heaviest body to move The Motorcycle Mover did not flex, and I could feel a sense of its solid strength, which was reassuring.
Subtle is the Stand Mover.
When using the Motorcycle Mover, the front or rear wheel is used as a branch in a circular arc, so the bearing of the Stand Mover is designed to roll in a slight arc.
It is good if you work from the Side Stand side, because you can push and pull it while checking, but from the Right Side where you can't see the Side Stand, you can't slide off the Stand. I am afraid that it will come off and I will fall off.
As a countermeasure, since the board is reasonably thick, I am thinking of making a tap, making a rip with AluminumAngle, and attaching it with Butterfly Screw. If you want the best, it would be better to laser-cut the plate into the shape of STAND and sew it (you need to know an ironworker who has a laser cutting machine to do this...).
A clean floor surface is a prerequisite for installing Motorcycle Mover. My garage is an office that originally had Linoleum flooring, so the concrete is rough and the rolling resistance is large. (I feel like putting a steel plate on it.)
I would like to ask WorldWalk to sell the Stand MoverSingle Body, because to pack the Motorcycle, you have to push it towards the Left Side, but it is difficult to retrieve the Stand Mover. I hope you can make this happen soon because I would like to have two more cars.
View detail
For Tire Cleaning
I bought it to clean the front tire when cleaning the motorcycle.
When you put the front tire on the WheelRoller, if you don't put the front tire on the WheelRoller in the middle of the wheel parallel to the front tire, when you turn the front tire, it will come off from the Rollers.
I have to start over from the beginning. It takes experience, but no matter how many times I try, it's hard to get the pit parallel and right in the middle.
Turning the Tire is awkward and requires a lot of force.
If you do not use the Rear stand, the Motorcycle is leaning and is dangerous.
I always use it for cleaning after Touring, I use it for a long time and it is durable.
View detail