Reviews
Easy to use
The rear wheels can be used without difficulty, but the front wheels cannot be used. The front wheels are gradually shifting, perhaps because they are stuck in place. View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
UnderFrame Stand
To OH the steering stem of RZ, we fixed it with this product and worked on it.
It would be nice if the height could be raised a little more.
View detail
better than nothing
The product will Gap depending on where it is placed. At that time, the RUBBER feet on the back will come off.
The bank angle is quite high, so even if you think you have placed it straight, it will gap.
View detail
For Chain cleaning and lubrication
Rear wheel:Even if it is placed in the middle, it gapes due to the angle of the Side Stand, and the Chain side is difficult to work on because it is angled too much.
Front wheel:Handlebar is not recommended for use by one person, as it will break off and definitely Gap.
If I could get on it, I managed to turn the Tire with one hand.
View detail
Chain Cleaning and Lubrication
I put the rear wheel on the Maintenance Roller Stand and cleaned the Chain, but the Tire was heavier than expected and a little difficult to turn. I am a beginner, but I managed to do it. View detail
easy
I bought this for the purpose of applying ChainGrease and polishing the wheels, and it works well considering the price, although it does require a bit of effort to rotate the Tire. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It also worked with the YamahaBOLT Shoulder Bag.
Although the only model that was compatible with this product was the Rebel, I thought that it might be effective for the BOLT Shoulder Bag since the Swing Arm is round. I bought it with the intention of becoming a human sacrifice. As a result, I bought it thinking that it would be useful for the BOLT Shoulder Bag, but the Brake Caliper is located under the Swing Arm, and the stubborn Exhaust Bracket is in the way. The BOLT Shoulder Bag, however, has the Brake Caliper under the Swing Arm, and the stubborn Exhaust Bracket is in the way and the position of the Bracket is fixed. The Front Brake Lock is an absolute necessity. View detail
easy to find a place to put things
It is small in size, so it is good to be able to place it in the right place. It can be used normally.
But if you have JTrip's Rear stand, that is more convenient in many ways.
View detail
Large Motorcycle can be used, but it's tough.
I used it on a Large Motorcycle, but I have the impression that it does not improve efficiency on the Front because the Roller comes off from the Guide while turning the Wheel. View detail
STAND
I used to work with Jack on it, but now I can work without anxiety.
Personally, I'd like to see Tie Downs and lashings included.
It could be used in a variety of ways.
View detail
It takes more strength than you think to turn it.
I bought a similar Roller stand at a certain cheap tool store and it did not turn by hand at all.
I trusted Brand and bought this one.
It's a 900cc motorcycle, but it takes more power to turn the tire than I expected. It is much better than the thing of the cheap tool store, but ChainMaintenance is quite Large strange. It seems to be inevitable with this type.
If you have a place to store it, it's much better to buy a Maintenance Stand. It's for people who don't have storage space.
View detail
I want to make chain refueling easier since there is no main stand.
I'm not sure if it's because I'm not used to it or because it's too heavy to turn the tire. View detail
Ease of use is as good as it looks. How is the texture compared to the front and rear STAND?
I have a similar STAND from UNIT.
I chose this one because the storage Size is Large threshold.
The fact that single tubes are sold in 0.5m increments is just right for the Motorcycle.
1.5m×Quantity:I used 2pc and 1m ready-made as it is.
We have a Large Diameter Pipe cutter, so we can process as much as we want.
Cut the height direction a little more and make it Compact.
It looks like you might want to increase your stability.
STAND has a load capacity of up to 500kg.
It is very sturdy, large and heavy.
However, if the weight is not applied vertically, it will not be very stable structurally.
In the case of high weight, it will have to be used with great care.
The ease of use really is as impressive as the description and appearance.
The point that concerns me is that the insertion hole may be too large for the diameter of the single pipe, and
We use OthersRearMaintenance Standetc. but the quality of the paint is poor. (Weak) I have a feeling.
The availability seems to be poor compared to the front and rear Maintenance Stand, and
I wonder if they're cutting corners because there isn't much demand. I suspect that they are.
Having said that, Ideas is a good product and very helpful.
View detail
The slide is useless.
The non-slip surface on the back of the body comes off immediately. is coming off immediately.
Since it supports a heavy object, please make it more solid.
If the body is dislodged when it is placed on the Roller, the RollerBody will not remain stationary and the
If there is no non-slip surface, the genus Gold part rubs against the ground and scratches it.
I'm just going to do some Chain cleaning.
Would a Type that lifts the car body be better to work with?
I feel like I can work better when the wheels are turning.
This one is more stable, though.
View detail
It's so much easier.
The turnaround in my small home parking space is now 1/1th the size of a parking space. We have a W800 and it travels lightly.
However, it was improved and GizaGiza seems to have increased, but there are many things that do not escape from Tire, so we decided to use Minus.
Am I doing something wrong?
View detail
Useful for changing directions on a Motorcycle
I've been curious about it for a while, but I was hesitant to buy it because the price was too high.
Then I got an email about the Point expiry, so I ordered it.
Although the old one was cheaper, I bought the new one because I thought it would be more convenient to have a part to engage the Side Stand later, even if it was a little expensive.
All you have to do is bite on the ThirdSTAND and Rear tire (or Front tire), step on it, and push or pull it, and it actually moves.
If there are dents in the pavement, etc., it won't move.
Also, the handles and other Edge parts of the Gold genus are still firmly intact, so I had two injuries when I touched them somewhat randomly.
In that aspect, it's Minus, but it's certainly useful.
I used a Transporter for the Sambar, and recently the length of the motorcycle has grown, so I thought it would be easier if I used the Motorcycle Mover, but as you can see in the picture, the sub-battery box and other parts were in the way, so only a few things could be moved.
I wonder if a Transporter that is fully usable and floorboarded with no sub-battery etc. would work.
View detail
Usability is bad
If you do not put the Tire in the Center, the Tire becomes obliquely formed when you turn the Tire and you can not turn it. It is troublesome to rotate while correcting each time. Call Maintenance Stand. View detail
Speaking of easy handy
I usually use Maintenace Stand, but since I made it damaged from a slight carelessness, I tried purchasing this item I was curious as before as a connection until I repurchase.
According to the conclusion, it is like the price is suitable.
I think how to compare it with Maintenace Stand, but again it is very heavy to turn the Tire and the workability is not very good.
Also, as the other people say, the position shifts while turning the Tire, so stand up the car etc etc. We need some kind of countermeasure.
However, it does not take up space for storage and does not Lift Motorcycle, so there is almost no Risk to overturn accidentally, and Merit says that prices are cheaper than anything.
However, if it was not discounted and sold at fixed price, I think that you should buy Maintenace Stand from here ...
If you are ChainMaintenance who moves the body forward and backward, I think that it may be good to try purchasing it once.
This time, only rear. I used it for Front, but I would like to use it later.
View detail
The additional purchase of the Option was carried out for the Wheel assembly of a CUB. to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while. Although it was able to take easily, it is not in what has a not m
The additional purchase of the Option was carried out for the Wheel assembly of a CUB.
to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while.
Although it was able to take easily, it is not in what has a not much good feeling.
About
use, it can be used also with the Wheel of a thin Shaft and is saved very much.
An opportunity to use is likely to increase by having purchased this Option.
View detail
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since th
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since the Maintenance became easy, the direction which existed was better than there is nothing since it is not high so. View detail