Reviews
Convenient for both ChainMaintenance and Wheel cleaning
These are the useful items that impressed us the most after we started to ride motorcycles. Especially for those of us who started our motorcycle life with Belt-driven motorcycles such as Buell and Harley, Chain maintenance has been a great hassle since we started to ride Chain-driven motorcycles.
I was very impressed when I found this maintenance stand, and it made it very easy to clean the wheels and check for nails and other foreign objects after driving. Moreover, even with a Harley Ultra weighing nearly 400 kg, it was not particularly difficult to put it on the stand, and it is a supreme product that is very easy to put on and take off.
View detail
Daytona
In terms of quality and texture is very suitable
About good using experience
About the beautiful design
About the size chart
The price is not too expensive compared to other products
About shipping and packing well
Any advice or notes when buying ------------------------------------------ ----------------- The quality and structure are very suitable About good use experience About beautiful design design About the medium size measurement table The price and compared to other products is not very expensive About transportation and packaging carefully All advice or note when buying Powered by Google Translator
View detail
A great, inexpensive product that can do large jobs safely.
Used to replace rear suspension on ZrX1200 DAEG.
Although the product cost about $10,000, the synthesis was high and there was no anxiety at all during the work.
Very useful for Front up or RearUp.
I wondered why I had not bought it before.
It was easy to assemble and remove, and the Body was shaped to fit easily into Garage, so it will be used more and more in the future.
View detail
It comes in handy
This is my impression after using it for more than a year after purchase. At first I was a bit nervous about handling it, but once I got used to it, I could move it to the position I wanted in one shot.
The STAND may or may not be able to move smoothly depending on how it is inserted, but once you get used to it, you will understand the hang and now it has become an indispensable product.
I installed the Side Stand side Mover in the wrong direction, which caused the Side Stand to go up, almost tipping it over (this was the first time, but not the first time). Also, does it depend on the vehicle?
View detail
Wheel and chain cleaning is easy
I purchased this product to clean Wheel and Chain.
I used to use a maintenance stand, but I had a hard time to wash them by myself every time.
It is also convenient that the width of the roller can be adjusted for each car model.
View detail
Rolling may be a little heavy.
ChainMaintenance has become much easier.
I also have a Maintenance Stand, but this is sufficient unless it is a large job.
View detail
revelation
Large is useful for narrow garages. Women need a little practice when starting to use it. It is recommended to use it after practicing in a wide space. View detail
Satisfied
I bought it because I moved to a new house and my parking space was getting smaller. I use it on my ZEPHYR750. I use it on my ZEPHYR750 and recommend it to short women who are not strong to practice many times to get the hang of it. View detail
Enough for chain cleaning/adjustment and rear wheel washing.
This type of roller stand has been around for a long time, but the weight is a little heavy and the rubber cushion on the back of the stand is
They were all peeled off with a single blow.
The body of the DAYTONA model is light and the position of the rollers can be easily changed according to the engine displacement volume of the motorcycle.
You can use from Mini bike to Liter machine.
I used to have a J-TRIP Stand for Beginner, but it took up a lot of space when not in use.
It gets progressively more difficult to clean up.
It's easy to store and it doesn't take up much space if you lay it down after use.
For example, when you put the rear wheel on the roller stand, you should put it slightly left of the center.
Let's aim at it and put it on at once.
After installing the front brake lever, tie the front brake lever with rubber or anything else to lock it.
When you turn the rear tire, the tire will shift to the right, so it is better to put the tire on the left.
I think it's easy to work with.
View detail
Easier to use than I thought.
I bought this for ChainMaintenance on my VTR250.
Maybe it's because the car is on the lighter side, but I didn't have to put that much effort into turning the Tire to get it to turn.
Body is the weight that can be held with one hand, and it is the impression that it is possible to put in and out easily because the place where it puts it is not troubled that much.
When you adjust the width of the Roller and Roller, you can remove it by pushing in the protruding part of the Roller, but I was able to remove it easily without putting any effort.
I worked with it on a flat Concrete and it didn't shift position.
To be honest, I didn't expect so much before using it, but it was more convenient and easy to handle than I expected. But if you have a large or heavy motorcycle, it may not be as stable as you expect.
View detail
Car models where the rear stand cannot be used
I was surprised at how durable it was.
I bought it for the maintenance of the rear area because the rear stand cannot be used in my car.
It lifts without a problem.
However, the lever whist is good for hanging.
View detail
GSX1300R HAYABUSA is Large strong even if it hangs?
I thought I would use a single pipe to replace the stem bearing on my GSX1300R Hayabusa, but I thought it would be too much work to assemble and disassemble, so I bought this product.
The maximum load capacity is 180kg, so is the GSX1300R HAYABUSA, which weighs almost 270kg, large and strong? I thought that I could go because I only hang the front. (Please do so at your own risk.)
Some people use a Ratchet Tie downBelt to hang it, but when you take it down, it falls all at once, so I recommend a lightweight Lever whist.
View detail
MaintenanceRoller
I was looking for a rear stand.
It's been working great for me.
View detail
Exactly for motorcycles that don't have a Center Stand!
ChainMaintenance on a motorcycle without a Center Stand is quite a hassle, but this product makes chain maintenance much easier! I wish I had purchased this sooner. Recommended. View detail
Very easy to use
Purchased for ChainMaintenance and cleaning around the wheels Chain cleaning and lubrication, which used to be done while pushing and pulling the motorcycle, is now much easier Tire rotation needs a little bit of power, but it's lighter than I expected, so it's not too much of a problem There is no problem as a practical use However, because of the horizontal gapping as it rotates, you can turn the Tire in the direction of rotation Quantity:Pair (for Left and Right) It's better to ride on either side of it, and the Body texture is very good It's not hard to find a place to put it like the MotorcycleLift, so it's only a simple task Then I think this is good enough for you View detail
Easy to use
I used it on my Kawasaki 750
I used it to clean the Wheel after Touring, but I didn't have to lift up the body of the car
It's easy to put on the Roller and rotate the Wheel
I wish I had bought it sooner
View detail
The quality is good and it's a good value for money
I purchased this for rear tire maintenance At first I was considering using a STAND type, but I felt it was a little inconvenient to use it in my parking lot I was looking for something a little more compact and found this product
I checked the actual product when it arrived, but there was no rattling, no unevenness in color, and the rotation of the Roller was also It was Smooth And I used it for maintenance Because of the slope, it needs a little momentum Moreover, because the tire is grounded to the Roller, it needs a little force only at the beginning of the turn of the tire But once it started working, I was able to turn it with more ease than I expected I think this is a good enough price for maintenance work for beginners
View detail
For Maintenance
Looking for a STAND for wheel and chain maintenance on a motorcycle I bought this one because I wanted to be able to rotate the Tire easily It's not too heavy, so it's easy to carry and there are several non-slip edges on the bottom I've got a Tire on it
As for the rollers, it's easy to get around the Tire, you can use the floating type It's not like the Maintenance Stand
Considering that I was doing it while moving the Motorcycle back and forth
I wish I had bought it sooner, because I can work much easier It would be even easier to turn it around if you put something under the Side Stand to adjust it
Maintenance is also a good product costumer, so even as a beginner in maintenance Thank you
View detail
A simple maintenance is OK
Purchased for front and rear wheel cleaning and ChainMaintenance
I thought about Maintenance Stand, but I had a CostValue for my usage There is none, so it is rejected
To use it, just put it on the Roller (Minus the non-slip part below)
Put GEAR in the front wheels and install FrontBrake stopper separately for the rear wheels Use
Both can be turned by putting a little pressure with both hands Be sure to check the movement of the vehicle
It is used in NINJA1000 (236?) People may be a bit Large strange to let one person ride the Roller alone
It's cheap for me and I'm happy enough with it because it's small and doesn't take up much space
View detail
That would be handy
I bought it for Front because I am making the most of the Center Stand
If you lubricate the Roller, you can turn it very lightly
Quantity:It is good that the front tire area is easy to clean once it is set, but the Center Even in the upright position with Stand, if the rudder angle is on, the ship will run away You need to straighten it up and turn it, as long as the rollers section is spooled up Maybe
View detail