Reviews
Convenient for both ChainMaintenance and Wheel cleaning
These are the useful items that impressed us the most after we started to ride motorcycles. Especially for those of us who started our motorcycle life with Belt-driven motorcycles such as Buell and Harley, Chain maintenance has been a great hassle since we started to ride Chain-driven motorcycles.
I was very impressed when I found this maintenance stand, and it made it very easy to clean the wheels and check for nails and other foreign objects after driving. Moreover, even with a Harley Ultra weighing nearly 400 kg, it was not particularly difficult to put it on the stand, and it is a supreme product that is very easy to put on and take off.
View detail
Easily Chain Cleanable! But there are better products out there.
As the title says, a motorcycle novice I want to clean Chain!" then it occurred to me
It is good to buy and use.
However, once you gain some experience and know the existence of various products, you will stop using them;
Specifically typhoon-proof and portable. Unit." products and
If you want to use it for more serious maintenance, you should purchase MaintenanceSTAND.
In terms of the first step of maintenance, this product can be recommendation.
View detail
Convenient
Convenient for cleaning the rear wheel and maintenance of the drive chain.
Chain can be cleaned very easily without Center Stand.
View detail
Triangle section is long and Motorcycle is not slanted.
Because the Triangle section is long, the Motorcycle is not slanted and will fall to the opposite side when the wind blows.
It is completely useless for both 18-inches and 19-inchesTire Racer.
I had to repurchase another product.
The Triangle seems to be about 1cm longer than the normal one that was repurchased.
View detail
For motorcycles that don't have a center stand.
Useful for cleaning the rear wheel and Drive chain, reducing chain cleaning and grease up maintenance time, and is a must-have item for any motorcycle without a center stand. View detail
I've been using it for a while, but...
It is good for ChainMaintenance and so on, but the drawback is that it is heavy, and the adjustment is necessary because the Gap comes gradually as the tire is turned, and it is troublesome to put the tire on every single time.
Also, it takes a bit of effort to rotate the Tire.
It's not bad, though.
Right now I'm using a lightweight Compact and easy Unit.
View detail
Good stuff
I bought this to maintain my motorcycle's front and rear wheels It should be lifted up with front and rear STAND, but I did not have to remove the Tire It is inexpensive and effective enough for cleaning purposes
However, if you don't let the Roller have Tire orthogonal to the Rollers, the Gap is gradually reduced as you rotate it You need to be careful when you put the Tire on it
View detail
ChainMaintenance is on its way!
The other day I used it for maintenance of the undercarriage, and the Tire rotates smoothly I was able to work efficiently with the
Because the body of the car is at an angle, the Tire is the Quantity:Pair (for Left and Right) There was no particular inconvenience to Slide to
I wish I'd bought one sooner, because up until now I've had to move the body back and forth to work on it!
I have no problems with the texture and quality
View detail
It is useful unexpectedly
It is C650 GT, but Rear is good because there is a Center Stand, but Front
When washing, I found something good with internal medicine
It is unknown whether it can be used at 120 - 70 - 15 at the inquiry stage
Although it was thing, it was easy to say
In addition I could also use MONKEY w
If it says strongly, the bottom Rubber shifted soon, but I do not mind it
It does not get in the way of it, it is better to use something quite useful
View detail
Speaking of easy handy
I usually use Maintenace Stand, but since I made it damaged from a slight carelessness, I tried purchasing this item I was curious as before as a connection until I repurchase.
According to the conclusion, it is like the price is suitable.
I think how to compare it with Maintenace Stand, but again it is very heavy to turn the Tire and the workability is not very good.
Also, as the other people say, the position shifts while turning the Tire, so stand up the car etc etc. We need some kind of countermeasure.
However, it does not take up space for storage and does not Lift Motorcycle, so there is almost no Risk to overturn accidentally, and Merit says that prices are cheaper than anything.
However, if it was not discounted and sold at fixed price, I think that you should buy Maintenace Stand from here ...
If you are ChainMaintenance who moves the body forward and backward, I think that it may be good to try purchasing it once.
This time, only rear. I used it for Front, but I would like to use it later.
View detail
It was good not to be STAND
I was worried about Rear stand in Maintenance of Chain but I bought it because the price is cheap.
Although it is not possible to turn around the corner, it turned around more lightly than I thought.
It seems that the cost effectiveness is high.
It did not have to be an expensive Rear stand!
View detail
Easy ChainMaintenance
ChainMaintenance of lifting and moving Motorcycle is bothersome because it is troublesome. It was very easy to turn Tire if Motorcycle weighing less than 200 kg. You can use it even with the car of Lock tie's Off. Even if things are small, it is light so you do not have to get in the way.
The price is also reasonable.
Because I am concerned about durability because it is Made in China -1 ☆
View detail
After moving out the apartment, the place was narrow also for maintaining and purchased for the Chain Maintenance to also maintain. Comment used for a 250-cc Motorcycle. Although it is troublesome too compared with the Maintenance using the
After moving out the apartment, the place was narrow also for maintaining and purchased for the Chain Maintenance to also maintain.
Comment used for a 250-cc Motorcycle.
Although it is troublesome too compared with the Maintenance using the
Maintenance stands, I think that he buys it and there is no loss if it is a direction of the same environment.
Compared with the Maintenance stands, a price is also handy.
View detail
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since th
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since the Maintenance became easy, the direction which existed was better than there is nothing since it is not high so. View detail
It uses by CBR250R (MC41). Since a car body is also light at 250 CC, a Round-and-round time gives a front wheel and a rear wheel. Although the purchase of the Maintenance stands was also Considered for Wheel cleaning or a Chain Mainte
It uses by CBR250R (MC41).
Since a car body is also light at 250 CC, a Round-and-round time gives a front wheel and a rear wheel.
Although the purchase of the Maintenance stands was also
Considered for
Wheel cleaning or a Chain Maintenance, it was made the Roller stand here which is cheap and does not take a place.
Since it does not use not much frequently, it was a correct answer here.
The
price is also compared with the thing of a certain Motorcycle article store, or it becomes and is cheap.
View detail
It purchased for Front-wheel cleaning. Since it was a sale article, it purchases for 3500 yen. When putting a Front tire on the Roller stand, it became somewhat prudent, but it could put easily and was also able to make cleaning common. It is satis
It purchased for Front-wheel cleaning.
Since it was a sale article, it purchases for 3500 yen.
When putting a Front tire on the
Roller stand, it became somewhat prudent, but it could put easily and was also able to make cleaning common.
It is satisfactory!!
When calling it the fine problem, it was heard also by the rumor, but while turning the Tire, a Tire shifts.
I think that it will derail to the extent that one week is carried out if a Tire is put on the center of a Roller stand.
In my case, it is ♪ which wants to use a Tire for the right corner of a Roller stand after next time, putting [ ♪ ] if a Tire is turned since it has shifted from the right to the left.
View detail
A tire is only put on a roller part using a slope. Of course, it can use by both front rear. Although it is recommend items found useful at the time of a car wash, when using especially in the front, since a handle will naturally go out if a tire
A tire is only put on a roller part using a slope.
Of course, it can use by both front rear.
Although it is recommend items found useful at the time of a car wash, when using especially in the front, since a handle will naturally go out if a tire is turned, cautions are required in not pinching a hand strangely.
View detail
It is a roller stand convenient for convenient cleaning of a roller stand chain and lubrication, maintenance of a wheel, puncture repair of a tubeless tire, etc. I think that it is very convenient also for construction of a rim line (^^ -- carrying is
It is a roller stand convenient for convenient cleaning of a roller stand chain and lubrication, maintenance of a wheel, puncture repair of a tubeless tire, etc.
I think that it is very convenient also for construction of a rim line (^^ -- carrying is also a compact size which is not lightly troubled by a space, either in the product made from 笙ｪ aluminum.)
If had one, it can use for years and finds it useful truly (^-^)
View detail
Doesn't it have the experience which became that you are likely to topple a motorcycle when applying maintenance stands? I have. It has pushed down that it is likely to push down. Since then, lubrication and cleaning of the chain were performed wi
Doesn't it have the experience which became that you are likely to topple a motorcycle when applying maintenance stands? I have.
It has pushed down that it is likely to push down.
Since then, lubrication and cleaning of the chain were performed without using maintenance stands, but the work back moved before a motorcycle one by one is dramatically troublesome ...
then, these pro-tools -- the convenient roller stand was purchased! This convenient roller stand is putting a tire on a top, and,
A roller assists so that a tire can be turned by hand! Also when putting a tire, since the guide has reached, it can put easily.
Cleaning and lubrication of a chain become very easy by the ability of a tire to be turned, and cleaning of a wheel also becomes easy.
Moreover, since the size of the product itself is small compared with maintenance stands, it is not troubled by storage space, either.
It may have to take care, although it is ! which is as the very name convenient roller stand.
It is using on the flat ground, and a thing which raises the car body if possible.
A car body will become unstable if it is used at a place with an inclination.
And if a wheel is turned in the state where the car body has not occurred, a tire will escape outside.
Therefore, you have to take care about using on the flat ground, and if possible raising a car body.
Incidentally, after setting a car body to a stand, the unexpected situation is avoidable if a ring stop is placed before and after a front tire.
If there is no ring stop, sense of security differs also in placing a gravel! Considering the facilities of the convenient roller stand itself, a little upper notes are not worried, although I can consider in trouble.
The one poorer at applying maintenance stands and the one good at, of course applying maintenance stands should taste these facilities once!
View detail
This product is usually used for a front for RIA using maintenance stands at the time of a car wash. It is made of aluminum, and carrying is light and storage does not take a place, either. The rotation of a roller of a using feeling is also smoot
This product is usually used for a front for RIA using maintenance stands at the time of a car wash.
It is made of aluminum, and carrying is light and storage does not take a place, either.
The rotation of a roller of a using feeling is also smooth and it finds it useful to wash a wheel.
Since it was somewhat expensive, it was set to *4.
View detail