Reviews
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
Thanks to the inventor!
[How is it used?
2.Purchased to put a 2.3Meter Motorcycle in a 5Meter wide place.
I mean, if it weren't for this kind of product, I might have abandoned the purchase of Motorcycle...
Was the one you received as per Image?
It was as strong and well made as the Image.
How was your experience with it?
It can smoothly move a 260Kg motorcycle and is a satisfactory product.
[Points to note]
Quantity on front wheel:If you want to set and move the device, you cannot make it Smooth until you learn the hang.
Adjust the direction of the front wheels so that both rollers of the Motorcycle Mover are grounded and can turn Smoothly.
Other items that would be helpful
Depending on the shape of the Side Stand, the orientation of the Stand Mover may not be stable.
View detail
It is active in our Garage!
Our home-made Garage is 8ft×8ft in external shape.
There is Heat Insulating Material&OSB plywood on the interior plus a doorway, about 230cm deep.
I was going to put the 250TR straight in, but when I put it in, it is not parallel to the wall….
No Space to switch back and forth….
So, a triangular Dead space is created.
I was wandering around the Net looking for a better way and came across this product.
I thought about buying a new one, but when I looked on Mercari, I saw it for sale at a discount price, so I bought it. (It was used, so I don't mind if it had some Wound/Rust.)
How to use,
(1) Put the front wheel in deep enough to hit the back wall.
(2) Stand the car body on the Side Stand.
(3) Insert the Motorcycle Mover into the rear wheel.
(4) Raise the vehicle and push the Motorcycle Mover in with the Right foot.
(5) The body of the car is completed standing on the Side Stand!
It was a little strange to pull the Garage until I got used to it, but this product eliminated the Garage's dead space and made it possible to use the Garage more spaciously.
I'm glad I bought it
(Unfortunately, the Center Stand for ESTRELLA, which we went to the trouble of attaching, is no longer usable due to the lack of a draw allowance in depth …...)
View detail
It comes in handy
This is my impression after using it for more than a year after purchase. At first I was a bit nervous about handling it, but once I got used to it, I could move it to the position I wanted in one shot.
The STAND may or may not be able to move smoothly depending on how it is inserted, but once you get used to it, you will understand the hang and now it has become an indispensable product.
I installed the Side Stand side Mover in the wrong direction, which caused the Side Stand to go up, almost tipping it over (this was the first time, but not the first time). Also, does it depend on the vehicle?
View detail
Fairly easy to move
I used it to turn around in a tight spot and it was easy to use without much effort.
Rust is uncomfortable and difficult to move depending on the orientation of the Stand Mover on the Side Stand.
View detail
revelation
Large is useful for narrow garages. Women need a little practice when starting to use it. It is recommended to use it after practicing in a wide space. View detail
You'll get used to it.
Used on MT09, easy to use once you get the hang of it, but the price tag is too high. 10,000 or less is appropriate. View detail
Very convenient, but also requires caution
With the Motorcycle Mover, I can easily pull my 250kg lighter machine up against the garage wall. I don't have to push and pull the machine over and over again, which saves me a lot of time and effort.
The product is well built, rigid, and beautifully finished with a high quality feel.
However, there are some points to note.
The Motorcycle stand may be paid off while the Motorcycle is being moved in conjunction with Stand Mover.
Relying too much on Stand Mover can be dangerous, and I almost knocked over a Motorcycle once.
This can be prevented by installing the Stand Mover with awareness of its orientation and moving the Motorcycle slightly upright.
Because we are moving heavy objects, there is a certain amount of danger involved. We always try to handle them with care.
View detail
It's expensive, but nothing else will change that.
The price is quite distressing before purchasing, but if it can be moved freely, it will be easy to move in and out of Garage, and even increasing the number of cars is not a dream.
With this New Model, both the front and rear wheels can be moved, allowing for effective use of space.
I saw some reviews on the old one that it still had the Edge, but I guess it's good that it's made in Taiwan? There is no Edge and there seems to be no worry about scratching Boots.
I'm not sure about Merit, which increased the number of Bearings on Motorcycle Mover to three, because it allows you to move without grounding the Bearing under your feet when pushing and pulling. I think it is suitable for those who want to stabilize the bike and step on it as hard as possible, but for me, it is useless because it increases the resistance to ground contact.
I tried to move GSX1100SKATANA which is the heaviest body to move The Motorcycle Mover did not flex, and I could feel a sense of its solid strength, which was reassuring.
Subtle is the Stand Mover.
When using the Motorcycle Mover, the front or rear wheel is used as a branch in a circular arc, so the bearing of the Stand Mover is designed to roll in a slight arc.
It is good if you work from the Side Stand side, because you can push and pull it while checking, but from the Right Side where you can't see the Side Stand, you can't slide off the Stand. I am afraid that it will come off and I will fall off.
As a countermeasure, since the board is reasonably thick, I am thinking of making a tap, making a rip with AluminumAngle, and attaching it with Butterfly Screw. If you want the best, it would be better to laser-cut the plate into the shape of STAND and sew it (you need to know an ironworker who has a laser cutting machine to do this...).
A clean floor surface is a prerequisite for installing Motorcycle Mover. My garage is an office that originally had Linoleum flooring, so the concrete is rough and the rolling resistance is large. (I feel like putting a steel plate on it.)
I would like to ask WorldWalk to sell the Stand MoverSingle Body, because to pack the Motorcycle, you have to push it towards the Left Side, but it is difficult to retrieve the Stand Mover. I hope you can make this happen soon because I would like to have two more cars.
View detail
Satisfied
I bought it because I moved to a new house and my parking space was getting smaller. I use it on my ZEPHYR750. I use it on my ZEPHYR750 and recommend it to short women who are not strong to practice many times to get the hang of it. View detail
It's so much easier.
The turnaround in my small home parking space is now 1/1th the size of a parking space. We have a W800 and it travels lightly.
However, it was improved and GizaGiza seems to have increased, but there are many things that do not escape from Tire, so we decided to use Minus.
Am I doing something wrong?
View detail
Useful for changing directions on a Motorcycle
I've been curious about it for a while, but I was hesitant to buy it because the price was too high.
Then I got an email about the Point expiry, so I ordered it.
Although the old one was cheaper, I bought the new one because I thought it would be more convenient to have a part to engage the Side Stand later, even if it was a little expensive.
All you have to do is bite on the Side Stand and Rear tire (or Front tire), step on it, and push or pull it.
If there are dents in the pavement, etc., it won't move.
Also, the handles and other Edge parts of the Gold genus are still firmly intact, so I had two injuries when I touched them somewhat randomly.
In that aspect, it's Minus, but it's certainly useful.
I have been using the Transporter for the Sambar, and recently, due to the lengthening of the Motorcycle, it has become necessary to stack it diagonally, and I thought it would be easier if I used the Motorcycle Mover, but as you can see in the picture, the sub-battery box and other parts get in the way, but it made moving it easier.
A Transporter that is fully usable and floorboarded with no sub-battery etc. would be much easier to utilize.
Added on Nov. 1, 2020
The handle came off, so I contacted the Manufacturer and they fixed it exactly.
Support also seems to be safe.
View detail
Useful for changing directions on a Motorcycle
I've been curious about it for a while, but I was hesitant to buy it because the price was too high.
Then I got an email about the Point expiry, so I ordered it.
Although the old one was cheaper, I bought the new one because I thought it would be more convenient to have a part to engage the Side Stand later, even if it was a little expensive.
All you have to do is bite on the ThirdSTAND and Rear tire (or Front tire), step on it, and push or pull it, and it actually moves.
If there are dents in the pavement, etc., it won't move.
Also, the handles and other Edge parts of the Gold genus are still firmly intact, so I had two injuries when I touched them somewhat randomly.
In that aspect, it's Minus, but it's certainly useful.
I used a Transporter for the Sambar, and recently the length of the motorcycle has grown, so I thought it would be easier if I used the Motorcycle Mover, but as you can see in the picture, the sub-battery box and other parts were in the way, so only a few things could be moved.
I wonder if a Transporter that is fully usable and floorboarded with no sub-battery etc. would work.
View detail
Does it take some getting used to?
The product is solidly built and lifts on Lever's principle
Pushing is Large sturdy, but I think it takes a little bit of getting used to pulling it forward
Our Garage is a little bit uncomfortable because the concrete of the floor is devoid of Decoration I guess
In the case of a large motorcycle, the Mover is also used under the Side Stand Quantity:The Set one might have been better
Anyway, I was satisfied because I didn't have to move the Side Stand while rubbing it forcefully anymore I am
View detail
Finish and strength are perfect
I used to have to turn the Motorcycle in and out of the garage multiple times to get it in and out of the garage with ease I can move my motorcycle to the wall and it is very convenient But it's better to have a Stand Mover when you're not used to it, because you don't have to worry about knocking it over You can move in Switzerland If you get used to it, you'll be able to move without a Stand Mover, but I'm not I'm glad I bought the Stand Mover
I think the price is so high that I'm hesitant to buy it I wish it was cheaper
View detail
It is easy to move your Motorcycle
Used in Z900RS
When we used to put the motorcycles in the shed, we had to switch them over and over again to get them in there But it is heavy and when I did it while being careful not to hit it, I got sweaty and my muscles ached I bought this product to see if it was possible to shift the rear wheel easily When I used it, I found that I could easily push and pull the rear wheel by Lever's principle It is now a necessity for getting the motorcycle in and out of the car
View detail
It is a good product
For the winter, because it is indoor keeping, we use it in the back of the garage during the summer, because they are both narrow spaces, we use it to move to the prescribed position.
It is satisfactory saving the trouble of turning back, it is easy to handle and convenient.
STANDCaster is not used but there is no problem. welded part - Caster - Products such as Roller Department are solid.
View detail
Very useful, but need attention
I have a Large type Motorcycle in the corner of Garage, but since the floor has a gradient, the Side Stand went up several times when pulling out, and it fell down. Do not worry about the Side Stand going up if you do it while applying force backwards. There is a big difference between the presence of Stand Mover and the absence of Stand Mover. We recommend purchasing Set. View detail
Performance highest
It helps to store Motorcycle.
I thought that I did not need much before buying, but I bought a lot of Motorcycle and purchased it because I care about how to put Motorcycle.
Easy to handle as well and it does not get in the way even after use.
I no longer worry about parking space Space.
View detail
This is convenient
Movement in a narrow storage is impossible without this.
I was surprised to be able to easily move it.
I put a file and cleaned the corner I was interested in.
If the price goes down to 10,000 yen, I think that the evaluation can be full marks.
View detail