Reviews
If it were a little cheaper, there would be a reason to choose it.
[How is it used?
Purchased for storage and maintenance of Dual PurPass vehicles.
I already have a Lift Stand made by DRC, but I bought an additional one because I use it for storage of another vehicle in my garage. I'd like to compare it with the DRC one.
Was the one you received as per Image?
I don't know which Manufacturer was the first to market this type of product, but I think DRC is the MAJOR MANUFACTURER in the STAND of LiftType with Damper? I think so.
PROTOOLS' Lift Stand is a "DRC+AstroPRO Ducts÷2" The product is functional and just like the Image, although there are some parts where the system is a bit....
Was the installation difficult?
The body and lever part, which is lifted by the principle of leverage, arrive in the box in a pre-installed state, so after opening the box, the body is assembled with two Bolts & Nuts.:Pair (for Left and Right) Bolt did not go into Smooth due to a subtle Gap in the
I used a round bar File to slightly enlarge the hole, but I think this is an individual difference, so I don't think all products have gapped holes.
How was your experience with it?
The vehicle is almost vertical and stable after lift up with less rattling at the props than with DRC products.
Since it has only been a short time since we purchased it, we have not experienced any Damper gas loss, and there is no functional inferiority compared to DRC products, and we hope that the performance will be maintained for as long as possible.
The rubber mats on the ceiling, which are grounded to the vehicle, are fixed to the top panel with thicker Rivet, but in terms of visual quality, they are inferior to those made by DRC.
[Was there anything that disappointed you?
I don't think it is a disappointment, but the paint on the lever part of the leverage is easily peeled off, so it might be better to handle it carefully, apply protective tape, or repaint it, as the base is exposed when it is raised and lowered roughly.
Other items that would be helpful
Point and hang of installation
If each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Quantities like the one I purchased:Pair (for Left and Right) Even if there is a gap in the screw hole of a screw, it is easy to rework it, so do not panic and check each part after temporary assembly.
[Availability and clarity of the Instruction Manual
It contains only a very simple installation instruction manual like a memo, but I think it is an easy-to-understand product for its intended use.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
To be honest, there is not much price difference between this product and the one made by DRC. "Sell" If you pay a little more Gold, a real (?) DRC will replace it. If you pay a little more Gold, you can replace your DRC with a real (?) DRC.
I would not say half the price, but a price about 4,000 yen lower than that of the DRC product would be attractive enough.
View detail
A little high for Minimoto use.
I was wondering about the step up Type,
Foldable and light enough to be left in the car.
I bought this one so that I can
The height is a bit high for Minimoto use.
Lifting and placing the Motorcycle is quite Large and strange.
You have to lift it up tight when you put it on.
The non-slip Rubber bites into the Under Guard.
STAND is running away from us.
If the leg opening angle can be changed and the height can be altered.
I thought it was nice.
By the way, Rubber smelled like petroleum at first.
After a week or so, it stopped bothering me.
View detail
light
I'm thinking mainly for home maintenance.
It's lightweight.
It can be used on the road (Course) etc. from now on.
I'm thinking.
I think it's a good cosmetic…
Personally, I feel that Side Panels are unnecessary unless strength is required.
Now I will have to use it in the future to see how durable it is.
View detail
Usable for Chain maintenance but unstable
The Lift with Damper is useful because it is the only one that allows low-floor trail bike maintenance. However, the Motorcycle shakes considerably when it is mounted. It is good for chain maintenance or temporarily lifting the front and rear wheels, but not for removing the tires to change the balance to a large one. However, it is not possible to change the balance to a large one by removing a tire, for example. In such cases, the Fixed Type STAND is the best choice. View detail
Plastic model of real Large
[How is it used?
I purchased this product for maintenance of D-Tra.
Was the one you received as per Image?
Well, it's like a so-called "maid in china" itself.
Was it difficult to assemble?
My initial expectation was that I would be able to assemble this thing in 30 minutes, but to my surprise, it took me 1 hour and 30 minutes! This is not worthy of being a pillar! If there was a hole, I'd want to get in it! W!
First of all, there is no Instruction Manual. No, there is a photographic illustration, but there is no verbal explanation at all.
There are two different Bolt lengths, but they differ by about 5mm, so it is not clear which is which in the picture. It is only when you actually assemble it that you can tell which one to use. The Bolt fixing method for the top panel and the four legs is, oh my! The picture shows that the washer is supposed to be inserted on the Bolt side (Front side), but in reality, the legs cannot be fixed unless the washer is inserted on the Nut side (Reverse side). The diameter of the hole in the leg side is larger than that of the nut, so the nut cannot be used unless a washer with a larger diameter than the hole is inserted. (See the photo:the area circled with a blue double circle)
Since plastic is tightened with bolt and nut, if it is tightened too hard, it will crack, so it is tightened with moderate torque, but it is expected to loosen while being used, so all bolt and nut are fixed with Screw Loosening Fluid.
How was your experience with it?
I just put a D-Tiger on it once as a test, and it was fine, but not too bad. There is a 75mm diameter hole in the center of the top panel, so I can use this hole to drain engine oil with a motorcycle in STAND.
[Included Parts:were they on?
All the necessary parts were available for assembly. Tools needed were a 4mm Hexagonal Wrench and a 10mm Spanner.
[Was there anything that disappointed you?
I didn't expect much from the beginning... . w
Other items that would be helpful
Point of assembly and hang:. "If you do, it will be done; if you don't do, it will be done." by Uesugi Takayama
Instruction Manual availability and clarity:don't read the Instruction Manual! Feel it!
Note:Assemble when you have time to spare. w
Items to buy together:Screw Loosening Solution
Opinions and requests to Manufacturer:verbal explanation Pulley's w
View detail
Convenient
I use it on my SEROW 250.
If you forget to check the minimum ground clearance and use it in SEROW, it is a little high (lol).
So I lifted it up a little and put it on.
This is the first time I've bought one of these, and it's pretty heavy when you lift it up.
I found it a little easier to use the Image to apply the Center Stand.
View detail
Cosmetically, it's alright. The only thing I wish I'd known before I bought it was that ……
I bought this to service my Off car.
When I bought it, I was worried about which one to use with HC2STAND of DRC, but I chose this one because the price was cheap.
It takes quite a bit of hang to lift, or I think that point is the same for all Off-road stands.
The only point is that this product does not have a lock function on the top panel, so when you lift the product, the body is not in quantity.:Pair (for Left and Right) It will move to the It is possible to take measures by fixing it with something, but I think that it is a matter that I want to know before I buy it if possible.
View detail
Well, it's something I wish I had.
I bought it for cleaning the chain on my off-road motorcycle.
To be honest, the rubber on the receiving end of it is easy to tear off and the price is right.
Since it is a Universal Product, where is Quantity:Set the rear tire to float or
It's quite inconvenient.
This would be a roller stand or a regular hydraulic jack.
You might as well buy it.
View detail
For expensive reasons - - -
I thought that it would be nice to fold and bought it. When it is in the shortest state, it sounds like "Scarlet is off" as "Karakara". I do not hear a sound when I'm in Lift up state. The working part seems to be moving, but I was a little worried. Lever's hard to lock. It is not about as much as I had expected for the price, the evaluation is three stars. Well - - - I bought it, so I think I will use it for a long time. View detail
Looks are nice.
I got lost as Ethos's Lift Stand, but purchased this way as it looks better. Although it seems like this, the seat surface is small and it is a bit uneasy. However, I wash the car without problem with a high pressure washer. He was fluffy, but - - - I think that I can never use it when a child is playing nearby.
Also, Nut for height adjustment is loose, the seat surface turns round and round. It is locked by Lock nut, but if you do not tighten it quite tightly, it will go around for each seat by the weight of Motorcycle and it will eventually loosen. I thought that the locking mechanism after Lift was good, but I think that there is a locking mechanism also in this neighborhood. There is no problem if you use correctly and politely in the overall review. When you remove Lift, if you release Handlebar and Seat with both hands and release Lever to save it with your legs, Stone and Motorcycle go down.
View detail
I do not move suddenly
I feel it has weight feeling after arriving
I did not move even when assembled.
Tentatively I wondered what to do with power skill
I managed to move while scraping the paint.
After that, fill the gap with Grease
I am using it now..
Well it might be a suitable price
Tomorrow I can use it now without problems.
View detail
In Maintenance
Purchased for WR250X Maintenance.
This item is the first purchase.
When cleaning Chain or removing Tire
You can work quite easily.
I am satisfied with the product
If you open the box after arrival parts are out of stock.
I could not use it for about a week without being assembled.
Although that was a bit disappointing
I think that comfort is good.
View detail
[Webike Monitor] It purchased to maintenance of the D-TRACKER. Since the Container of bottled beer was used until now [ ], it becomes very easy to carry out maintenance. Very much satisfied.
[Webike Monitor] It purchased to maintenance of the
D-TRACKER.
Since the Container of bottled beer was used until now [
], it becomes very easy to carry out maintenance.
Very much satisfied.
View detail
This product was purchased while doing the Sale before. There is only a STAND of a true first-class Manufacturer, and structure is very solid and easy-to-use. Also when carrying out the Lift up of the Motorcycle, there is sense of stability very mu
This product was purchased while doing the Sale before.
There is only a STAND of a true first-class Manufacturer, and structure is very solid and easy-to-use.
Also when carrying out the Lift up of the Motorcycle, there is sense of stability very much and it is also easy to maintain very.
If it is caught since there is nothing that has a Lever [ like / Locke / merely ], a Lever may be raised, a Lift Down may be carried out and there is a danger electrical.
I am just going to have not been such although used for a long time well until now, but to want you to take care.
View detail
strong point - a Lift up can be carried out lightly, and since it is an oil-pressure Bumper, a Lift Down is also smooth. and stepless height adjustment are Good(s)! and a price are handy. Since the demerit and the top plate f
strong point
- a Lift up can be carried out lightly, and since it is an oil-pressure Bumper, a Lift Down is also smooth.
and stepless height adjustment are Good(s)!
and a price are handy.
Since the
demerit
and the top plate fixed Nut are Singles, a Nut loosens and a top plate rotates.
You should make a Double nut.
and the support lower part protrude.
The Rubber board size raising of the four lower parts of a pedestal was carried out, and the Rubber board was fixed by the Cable tie.
generalization
- it is unavoidable -- ~.
Since he bought it with much trouble, it continues using.
Although the durability of
and a hydraulic damper should be just good ...
View detail
To the extent that the size of a main part and a lift amount are right just. It may shift, when Lift carries out, since the Top plate was not simply stable firmly.
To the extent that the size of a main part and a lift amount are right just.
It may shift, when
Lift carries out, since the Top plate was not simply stable firmly.
View detail
[Webike Monitor] Since off-STAND has not been used until now, it is incomparable, but a STAND can be stood without , especially fault. [ すすす ー っ and ] Also when raising the STAND, a Lift can be carried out without seldom using power, whe
[Webike Monitor] Since
off-STAND has not been used until now, it is incomparable, but a STAND can be stood without
, especially fault.
[ すすす ー っ and ] Also when raising the
STAND, a Lift can be carried out without seldom using power, when taking down, it is the favor whose
Damper is effective, and it can take down, without falling with ガシャン !.
Since it is actually used and the Maintenance has not been carried out yet, it does not understand, but I think that it will large-play an active part when performing Maintenances, such as a Chain, the
Wheel, and Sas.
View detail
[Webike Monitor] He bought it in order to carry out the Maintenance of the Off vehicle. Since it was the first, there is no instruction manual and usage does not unsatisfactorily わかりま. It may say the beginners with a Lift mechanism.
[Webike Monitor] He bought it in order to carry out the Maintenance of the
Off vehicle.
Since it was the first, there is no instruction manual and usage does not unsatisfactorily わかりま.
It may say the
beginners with a Lift mechanism.
View detail
It is used for the maintenance of an off vehicle. Since the beer crate was used until now, it becomes the comparison with it. Sense of stability: Don't change. It sways. It is uneasy to carry out a tire change in this stand. Taking up
It is used for the maintenance of an off vehicle.
Since the beer crate was used until now, it becomes the comparison with it.
Sense of stability: Don't change.
It sways.
It is uneasy to carry out a tire change in this stand.
Taking up and down: It is very easy and easy.
View detail
As the comment to be used ... Good place:1 and height can be tuned finely and it can be used by an off vehicle at large. A damper is effective and safe, when taking down, 2 and. Locke of 3 and the raised lever can be carried out, and safe. 4 a
As the comment to be used ... Good place:1 and height can be tuned finely and it can be used by an off vehicle at large.
A damper is effective and safe, when taking down, 2 and.
Locke of 3 and the raised lever can be carried out, and safe.
4 and cost performance are good.
Be? Place: If lift up is carried out, it will incline to the part damper side of play of the central part (stanchion) a little.
It is five stars ... and to incline and go up, although it is such touch at a stretch, if mine does not have ? it skill.
View detail