Reviews
If you carry it 【Emergency Side Stand】
【What made you decide the purchase?】
At long distance Camping touring, Punctureetc. As Jack, which was carried as a repair, was too bulky, it closed, so I found this Unit Emergency Side Stand lightweight in this Compact at the site of this Webike, I was love at first sight and immediately bought it.
【How was it actually used?】
This Unit Emergency Side Stand has a storage size of 280 mm when it is compact, but it is compact, but dimensions that can be fixed and used safely are 285, 305, 325, 345, 365, 385, 405, 425, 445, 465 (mm) It has become 10 sizes of 10, and it becomes considerably long and flexible..
Actually I tried using it for my Motorcycle It was easier and more balanced than I had expected Tire of Motorcycle was able to float well.
This is preeminent, it is a good item.
【Mounting was difficult?】
It was very easy to leave Rear tire floating using this Unit Emergency Side Stand, but I think that it is necessary to have a little bit of skill to bring Front tire to Balance well.
I think that if you practice how to use this Unit Emergency Side Stand 2-3 times before carrying it to Touring you will not have to be confused when practicing.
【Please tell me the installation point and hang. ]
Since this Unit Emergency Side Stand can move the use dimensions finely and arbitrarily with approximately 20 mm Pitch size up to 285 mm to 465 mm, mark the marking with Tape or an oil pen in advance in the use dimension position of your own Motorcycle If you do, you can work well without using confusion when using Isa.
[Is there anything I was disappointed about?]
Although not saying disappointment, since this Unit Emergency Side Stand is not Jack, it is a tool to use to incline the Motorcycle and lift the car body after inserting it.
Instead of lifting the motorcycle like Jack, instead of defeating the Motorcycle with the Oide Side Stand side with your own power and lifting the Tire, put this Unit Emergency Side Stand on the lower side of the Engine on the opposite side It is a type supporting tool to insert and support and support it.
This Unit Emergency Side Stand is not Jack, so please notify us.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Oiletc. To make it so noticeable that the dirt of the Unit Emergency Side Stand is noticeable, let me change the color of this Unit Emergency Side Stand to a bright color other than Black, soon Oil dirt etc etc. You can notice immediately that you can remove it by wiping off the dirt so we think that it will become easier to prevent contamination expansion and secure safety work.
【Have you compared items?】
This Unit Emergency Side Stand is not Jack, but compared with Jack of Oil expression and Jack of PANTAHGraph expression.
This Unit Emergency Side Stand 's Compactness, Lightness and Ease of Handling are Dantotsu.
It is another product unique to other companies.
Even at Motorcycle parts shops in other prefectures and nearby prefectures and other Web shops, we could not find any more products.
While this Unit Emergency Side Stand is still in existence in the world, I think that those who purchased will certainly not regret in the future.
View detail
I think that it is a good product
I do not want to encounter actual use scenes, but I think that it is absolutely a good thing if it is in emergency.
I have seen people who have repaired Puncture by laying Motorcycle on the forest road many times, but if you can not lay it down, you are better, and if you are on a paved road it's more so.
Compact place is also nice.
View detail
The rear wheel is easy to float, the front wheel is difficult.
【What made you decide the purchase?】
I purchased it because it seemed possible to repair without killing Motorcycle in Puncture repair and ChainMaintenance at the forest road.
【How was it actually used?】
Hover Motorcycle with Side Stand as a fulcrum, put it under the car body and use it as a replacement stick. I was impressed to be able to float the rear wheel smoothly.
It seems that it can be used for Puncture in forest roads and simple maintenance at a friend's house without Jack stand.
【Please tell me the point of installation and hang (in the case of Hard parts)】
It is safer to fix the Front brake with strings, Tie Wrap, etc. when floating the rear wheels.
If you float the front wheels behind the baggage and Beltetc. It is better to put a load on it and put GEAR in it.
[Is there anything I was disappointed about?]
I thought that both front and rear wheels could be easily floated, but it is necessary to hang the front wheels considerably hang.
You'd better practice at home..
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that it can be handy as a handy item if it can be made a little lighter.
If you write in the Instruction Manual such as hang which makes the front wheel float, it will be saved as an amateur.
【Have you compared items?】
I think that similar products from other Manufacturer have not appeared so far.
In the past it seems that similar items were out from KIJIMA.
[Others]
It was disappointing that it was difficult to float the front wheels, but as I often go to forest road alone, I feel a bit relieved if I take it in a spiritual sense.
I will exchange Tire at home using this STAND and I will practice in preparation for Isa.
View detail
For Puncture repair and Chain adjustment when going out
Basically there is no Center Stand for Off-road vehicles.
So in ChainMaintenance and Tire exchanges you will need Off-road Stand.
I hope that it is at home, but if you need it on the go, it will be a bit of a problem.
The Puncture repair at the forest road becomes disgusting feeling that it puts Motorcycle down or puts Swingarm on the ground.
There were a lot of products of this kind over 20 years ago, but I started taking an Off car after a long time, but it was hard to find.
However, it is dark under the lighthouse and is handled by Webike!
It was a purchase immediately.
Make sure that the items you received arrived securely.
I think that it is a little cheaper and maybe Chatay.
The feeling I used - - -
Goo !!! I bought good ones!
Up to now ChainMaintenance that was on the beer Case is also perfect. It firmly stands for itself.
Although I have not used it in wasteland, I think that it can be used properly.
If you go to Hard Off-road, MaintenanceSTAND can recommend to those who are troubled by the place!
View detail
Off Required for car maintenance
I bought it at the same time as purchasing WR 250 R.
This will allow you to remove the front and rear Tire.
The function itself of this product is a good one, but if the roof of the top board is sweet it will easily rotate the top board.
When I got off Motorcycle, I put my feet on the top board to make it a stand, it turned and I broke Balance ww.
Let's pay attention to usage.
View detail
Looks are nice.
I got lost as Ethos's Lift Stand, but purchased this way as it looks better. Although it seems like this, the seat surface is small and it is a bit uneasy. However, I wash the car without problem with a high pressure washer. He was fluffy, but - - - I think that I can never use it when a child is playing nearby.
Also, Nut for height adjustment is loose, the seat surface turns round and round. It is locked by Lock nut, but if you do not tighten it quite tightly, it will go around for each seat by the weight of Motorcycle and it will eventually loosen. I thought that the locking mechanism after Lift was good, but I think that there is a locking mechanism also in this neighborhood. There is no problem if you use correctly and politely in the overall review. When you remove Lift, if you release Handlebar and Seat with both hands and release Lever to save it with your legs, Stone and Motorcycle go down.
View detail
STAND's classic for Off-road motorcycle!
As a STAND for Off-road motorcycle, it is this DRC's Lift Stand that I often see in the Race venue etc..
The height adjustment, the rubbing board of non-slip, the effect condition of Damper etc. are all considered firmly thought and it can be used safely without hesitation even if it is a beginner.
Since I can choose Color at this time, this time owned Motorcycle (Honda) I chose RedMODEL according to the Color of.
If there is a color line nap that also matches other Manufacturers, everyone will be delighted.
View detail
I do not move suddenly
I feel it has weight feeling after arriving
I did not move even when assembled.
Tentatively I wondered what to do with power skill
I managed to move while scraping the paint.
After that, fill the gap with Grease
I am using it now..
Well it might be a suitable price
Tomorrow I can use it now without problems.
View detail
HC2 Lift Stand
Lift Stand is my first purchase.
I think that it is a required Items for Maintenance of MotocrossMotorcycle.
I purchased it for Maintenance of our WR 250 R, but the up and down movement is also not bad, it goes up and down relatively easily.
Just at the beginning of use, TAB and receptacle at the corner Pipe interfere with each other when painting the Motorcycle and paint will be bald, so Silicon sprayetc. It is recommended to use with good sliding.
View detail
Ideal for Off-road vehicles
I also entered XR 250 with 4 cm LOWdown.
Until now it was a beer Case, but the stability feeling during maintenance around the Front and Rear is quite different.
It was easy if you did it like a center stand.
It was good enough to make me think that I should have bought it without failing from the beginning.
Height adjustment is a little troublesome, but once you match the height, it is so clear that you do not mind later.
Recommendation for those who maintain themselves.
View detail
Off car is necessary after all.
Until now I was cleaning the beer Case under Under Guard at the time of cleaning of the Chain and supporting it with the STAND while cleaning the car with the car body obliquely floating, but the side with the STAND comes to the lower side due to the structure of the Motorcycle Oh, naturally cleaning of Chain on the same side was also going on quite a hard posture. I do not like that anymore!.
Because front and rear wheels can be floated at the same time Chain Cleaning as well as Wheel Easiness of cleaning is also greatly improved UP! It is surprisingly easy to raise the car body, and when dropping down, it will not fall off thanks to Damper!. In terms of the structure of STAND, when grabbing Tire and turning it will surely shake the Motorcycle as well, it is not even an interesting Level if it is about Chain cleaning or Wheel cleaning.
If you are working safely you think that it is perfect if you add more car Pantograph jack to Swingarm and support it.
View detail
If you fail with cheap buying, it might be better.
☆ One deduction point is bad compatibility with DRC inspection.
Shaft and Instruction Manual were out of stock.
Because I can not work on the day I want to use, I must purchase M10's Bolt and Nut at the home center unavoidably.
We are contacting Big's Manufacturer from charge etc.. I was asked to do it, but from Manufacturer it is something like Department ProductNo ?, and is this out of stock ?? etc etc. Inverse question.
Even if it is said to the amateur Department ProductNo number - - - (I do not understand Shaft's number. )
Somehow the person responsible for Waig Big responded and all finally arrived.
Thank you.
Work efficiency has been upgraded.
On use, beer Case, cheap Maintenace Standetc. Is it possible to work with confidence rather than to use.
I recommend Grease up to details. (I tried to imitate other people's blog. )
I pulled out of the box and iron powder etc.. It is advised that it may be better to pay it outside.
View detail
Off If you buy a car
Off When I bought a car, my friend told me that I could buy it soon I bought it. Various useful as maintenance and parking. It is quite difficult to float the Rear tire in the foot length WR 250 R. View detail
Off It is a necessity of a car
The serviceability of Off car without Center Stand is dramatically improved. However, because there is no Damper in the lift section, it is a little frightening time to make the STAND. Recently the same price range almost comes with Damper, so I'm a bit dissatisfied with this point. View detail
In Maintenance
Purchased for WR250X Maintenance.
This item is the first purchase.
When cleaning Chain or removing Tire
You can work quite easily.
I am satisfied with the product
If you open the box after arrival parts are out of stock.
I could not use it for about a week without being assembled.
Although that was a bit disappointing
I think that comfort is good.
View detail
After all, I bought it. (sweat)
I do not know whether to use so much, I repeated the bidding Yahoo auction, good things will not fall below 10000 yen.
That way, 25% OFFSale at Sale of WE BIKE.
The same price as Yahoo auc's new item.
If shipping charge is virtue?
, And a little.
For cleaning Wheel and Chain after driving, the front and rear wheels rise one at a time so it is easy trip.
But, to use it for maintenance, instability is a little worrisome.
Although it may depend on the place to raise.
If there is Parts fixing footpeg, it seems that it can be solved, but this handiness is going to disappear and it is a difficult place.
View detail
Although it was easy-to-use, withstand load was purchased to not knowing, and although it was withstand load 150 Kg, it was used for maintenance of DR650 of 166 Kg.If it thinks that the lower part of
Although it was easy-to-use,
withstand load was purchased to not knowing, and although it was
withstand load 150 Kg, it was used for maintenance of DR650 of 166 Kg.If it thinks that the lower part of
support changes, and a top plate began to become slanting ... If it begins to
Bend, it will become an inclination which feels a danger electrical by 2~3 times after that, and will give up use.Let's keep withstand load.
View detail
Although purchased to TT250R, height is insufficient, and a Tire is not raised unless it covers with something downward. What was necessary was just to have bought the direction which carries out a Lift highly.
Although purchased to TT250R, height is insufficient, and a Tire is not raised unless it covers with something downward.
What was necessary was just to have bought the direction which carries out a Lift highly.
View detail
It purchases for the purpose of [ of XR230 ] Maintenance work. Height which XR230 with the low ground clearance is satisfactory, and enters under a car body. A Lift is simply possible on foot, supporting a car body lightly at the time of a Jack-up.
It purchases for the purpose of [ of XR230 ] Maintenance work.
Height which XR230 with the low
ground clearance is satisfactory, and enters under a car body.
A Lift is simply possible on foot, supporting a car body lightly at the time of a Jack-up.
At the time of a Maintenance, a Jack does not fall according to a lock mechanism.
Jack whose black paint application is also smart and which is excellent in it also in Cost.
View detail
[Webike Monitor] It purchased to maintenance of the D-TRACKER. Since the Container of bottled beer was used until now [ ], it becomes very easy to carry out maintenance. Very much satisfied.
[Webike Monitor] It purchased to maintenance of the
D-TRACKER.
Since the Container of bottled beer was used until now [
], it becomes very easy to carry out maintenance.
Very much satisfied.
View detail