Reviews
Repair spark plug cap for the Kitaco Neo kit
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of plastic for the housing and rubber for the boots. About the feeling of use, This is sold as a repair spark plug cap and pairs perfectly with my previously purchased Kitaco Neo kit. Products to buy together, This spark plug cap is designed for a smaller diameter spark plug then the original Honda one, the NGK ER8EHIX 8mm spark plug would be ideal to add to your cart. Difficulty of installation, I can say the fitment of this repair spark plug cap for my installation was easy due to the simple process of twisting the cap onto the ignition lead as it secures itself into the core. Cost performance and comparison with other products, The pricing of the product is great. You are receiving a upgraded performance spark plug cap that helps to provide a strong ignition at a price cheaper then buying a replacement Kitaco Neo kit. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Spark stability!
tl50 in 1976
I was doing a Restore and checked to see if sparks were flying …
Hmmm...weak. Levels are tough visually.
I've KICKED it a few times while holding the Plug cap and it electrocuted me (sweat), but it does take Engine.
View detail
Not only the Plug, but also the Cap is replaced.
Because RD50 is 2Cycle, it is easy to change the condition by the state of Plug. When plug is checked frequently, plug cap also hurts. Although the starting nature and the blowing of engine did not change so much even after exchange, it can be relieved somehow.
KITACO's Plug cap is a little shorter than the OEM, but the length is closer to the cylinder fin. It is not so much that the fins and the cords come into contact with each other, but a little longer would be reassuring. So, 4 stars.
View detail
It's a nice, simple shape.
Plug cap is a simple part, but it will interfere with Oil Cooler OutletHose in MONKEY if you take it out in the wrong way.
This product is very small, so if you adjust the cord length of the Coil side, it will fit nicely without any interference with the Oil cooler hose.
There are many more colors, shapes and sizes to choose from if you're concerned about the look, but this one, the most Orthodox of all, is the one you'll want.
View detail
Cost performance was good and it worked fine
Since I replaced the Ignition coil, I decided to change it together The price is cheap, and this is enough for ordinary use I think that the next time I change it, I will also use this product View detail
Expanded plug selection with KITACOPlug cap
The terminal shape of the Spark plug is divided into Large and "Integrated" When "Separable type" There are two types Generally speaking, Motorcycle Plug cap is a detached Nut (The one without Nut from the beginning is called "Screw type" and should be classified into 3 types There are also If you make that kind of division, the separated type is called Screw type if you remove the Nut) Most of them are compatible with the Therefore, even if you try to freely choose the performance and characteristics of the Plug Not in one piece That's what I'm talking about Since this KITACO's 751-0500300 is compatible with an integrated model, you can use all It becomes possible to support the Plug, and the choice is much wider However, in my case, rather than wanting to stick to the plug performance and characteristics, I have a dis BP6 from Mazdafor Vehicle, which I bought in large quantities at $1.50 a bottle at CountShop I don't want to waste ES, which is the most Large reason for the Plug cap exchange KITACO 751-0500300 is the best choice for those who are particular about the performance and characteristics of the Plug I would like to recommend it Impression with the hope that you will find it helpful in that sense
View detail
KITACO Plug Cap (70-B)
This type of KITACO Plug Cap,has very low resistance.It is recommended for racing use only!I use it with kitaco coil and denso iridium spark plug.Performance of the engine has been increased! View detail
Good for safety
Easy to install and use is no problem
I chose by Manufacturer and Cost
Performance such as improvement of startability and improvement of acceleration power often said Upetc. Is unknown
View detail
You can purchase it easily
I bought it because Mugawa's igCoil does not come with a Plug cap.
NGK 's Cap has 5 kΩ resistance but it is said that there is no resistance and I bought it including the test. The price was also cheap.
Also, although I did not mention it in the explanation, I do not need a terminal nut at the top of the plug. Remove the plug with Terminal nut and install!
I hope it will be helpful.
View detail
Instead of degraded Cap
I bought it with a substitute item of degraded Cap. Those without resistance are selected because there is not much good in Assy items. Spark is good and satisfied. View detail
Cospa may be nice
It was nice to see from the price. Because resistance is not contained, I felt that I feel like sparking spiritly. Since the electrical system is often said to be such a thing. View detail
KITACOKITACO Plug Cap (70-A)
I attached it to MONKEY, but it was NORMAL-like and easy to install, easy to make and also affordable and affordable to buy. Black, but I think Red is also good. View detail
It joined to the 8-mm Silicon cord of the TAYLOR. It is a product first. It is the code of 8mm as a 7-mm code is designed as a premise. It did not enter as it was. extending insertion part and applying an Oil a little even if it makes i
It joined to the 8-mm Silicon cord of the TAYLOR.
It is a product first. It is the code of
8mm as a 7-mm code is designed as a premise. It did not enter as it was.
extending
insertion part and applying an Oil a little even if it makes it easy to slide on --
-- it was not able to insert to the back at all.
Although the
code was processed thinness and inserted, when the part of the
point of contact was the code in the state where it put in forcibly for back feeling, a little, the
center position shifted, and even if measured with the
Tester, without contacting the electric wire of a code, a value did not come out.
-- a pure cord cover portion is diverted after all, the portion which covers the Cable of the
Plug cord is cut, and it is easy to do
contact of -- as -- It was able to use.
When this product is used 7-mm code strict observance is foundations.
With no
resistance If there are few selection kinds since there are few goods, but the
price is considered, they will be such a thing or ? っ. I would like to use for the time being in
actual condition.
View detail
it is the engine performance of a Plug cap and is a Coil -- -- There is also no dramatic change and the first good place cannot be a low price of the price.... it is exchangeable without constraint.
it is the engine performance of a Plug cap and is a Coil --
-- There is also no dramatic change and the first good place cannot be a low price of the
price.... it is exchangeable without constraint.
View detail
Since he has no register, the cold time of startability for which I feel that ignitability went up also by the general plug is also good, and the low price of a price is the highest from what whose idling was also stable.
Since he has no register, the cold time of startability for which I feel that ignitability went up also by the general plug is also good, and the low price of a price is the highest from what whose idling was also stable. View detail
cheap -- thing purchase was carried out. If it actually attaches, on the whole, it is good, but I feel that torque increased especially at the time of low rotation. It becomes foppish.
cheap -- thing purchase was carried out.
If it actually attaches, on the whole, it is good, but I feel that torque increased especially at the time of low rotation.
It becomes foppish.
View detail