Reviews
Purchased due to Plug cord change
I bought a battered 900SS (900SL) and am Restore.
I have been using AS Uotani's SP2Full powerKit for over 20 years and have been using it all this time on my bimota db2 (DUCATI 900SSEngine equipped car).
We transplanted the engine to the 900SS that we are restoring, and since we are taking this opportunity … we also replaced the plug cord.
The old plug cord had the connector that came with the kit crimped onto it, but since it is not possible to reuse it when replacing the plug cord, we purchased the connector that is available as a for repair kit.
The Coil used in the for DUCATI kit is a 1P independent type, the same as that used for the 4stSingle engine.
The connectors seem to be the same as those used in DYNA and other coils, but I didn't want to use a different size, so I decided to use the AS-Uotani OEM Product, although it is a bit more expensive.
The same shape is available from several manufacturers, but the lowest price is probably the one made by Posh (quantity).:(1 Set of 2pcs. around 500 yen), but AS Uotani's products are available in Quantities:2pc. It is a high-end product that costs more than 1,200 yen for a set.
It looks like the same thing no matter how you look at it … well, just in case.
As a Connector, it is very ordinary, so there is nothing special to say about it.
It takes a little bit of hang to Crimp, but you'll just have to Crimp hard on your own....
View detail
NGK Cable Joint is very good
I really didn't know about an easy way to connect the ignition coil to another ignition coil wire.It was when I was searching for information on the Internet that I first came across the NGK CABLE SPLICER.Webike shop is the only shop that we all remember in such situations. When I looked at the webike shop, there is a possibility to buy NGK CABLE SPLICER. So I didn't waste any more time and bought one.Indeed, this NGK CABLE SPLICER is very valuable because an oem brand new ignition coil is expensive and when the length of the old ignition coil wire is not enough, it has to be removed from use and replaced with a brand new ignition coil. Because of NGK CABLE SPLICER, there is no need to buy a new ignition coil.Since NGK CABLE SPLICER is available, only an ignition coil wire with the same diameter as the oem ignition coil wire is required. Therefore, it is a special ability of NGK CABLE SPLICER to be able to use the old ignition coil wire continuously without removing it. A very good product.It must be said that it is a must have product for everyone who rides motorcycles .worth every yen . NGK CABLE SPLICER price is very cheap. I would highly recommended to buy one . Need to remind WEBIKE PACKAGING AND FAST SERVICE .WEBIKE SHOP THE ONLY PLACE TO BUY CONFIDENTLY NEEDED PARTS AT LOWEST PRICES.VERY AUTHENTIC ONLINE SHOP. WEBIKE SHOP PACKAGING IS AWESOME AND they secure the inside goods with bubble wrap.The parcel is packed very well so that it does not get damaged. overall, topnotch service . thank you Webike Team. View detail
PowerCoil relocation
Purchased to replace Cable due to PowerCoil relocation.
Not possible or not possible for Repair Parts.
View detail
Used when replacing Plug cord
It is used in GPZ900R.
We have installed AS Uotani's Full powerKIT and used it to replace the Plug cord.
This time, the plug cord is NGK's power cable, which is specially designed for each model of car. It was quite difficult to stick the cord into the RubberBoots. 556 was not enough, so I sprayed CCIMetal rubber and the Plug cord went through the Rubber cover.
One thing to note is that it is not possible to crimp the terminals neatly when crimping.
From the beginning To some extent." It is important to keep it bent and crush it firmly at the end.
It is a must-have component when using the Uotani Coil.
I think it is a little expensive, perhaps because it is a monopoly. It would be helpful if the price were lower.
View detail
AS Uotani Plug cordco NECTO
Purchased with AS Uotani Coil cord extension View detail
Plug Identification
Installed on NGK Power cable.
It is convenient for a quick glance.
It was very tight against the cable, so I slid it on with SiliconeLubricant.
It may be a good idea to use pliers or other means to spread them out a bit.
View detail
I'll use it someday
I ordered it because I thought I would need it while changing the spark plug cable, but the coil and cable were separated and it became useless. View detail
A must for Uotani Coil
This Connector is required to plug the Plug cord into the Uotani Coil.
Installation is no problem if the instruction manual is followed, but it was difficult to insert the 8mm thick plug cord.
We recommend using a standard 7mm thick plug cord.
View detail
Used for Z750four
When I replaced the plug cord, I purchased it to check the number of cylinders.
We wanted something as inexpensive as possible, as long as we knew the number, and it turned out to be just the right purchase.
The unique shape makes it easy to attach to the plug cord, and I am satisfied with the Large change.
The actual product was smaller than I had expected.
View detail
For replacement of plug cord.
I replaced the plug cord because I felt the ignition was getting weak after 3 years of use. It is now stronger and more robust.:1 Set of 2pcs. so I guess it will be another 3 years before I get another 1pc. View detail
Plug cord for Coil connection
I replaced the plug cord with an Ultra from OEM.
The Instruction Manual says to port the Cap and Seal from the OEM code for the Coil connection. However.
It's been 34 years. It's impossible, isn't it?
That's where this guy comes in, Exactly.
It's a four-cylinder, so I bought two bags, so that's four (laughs).
The cord connection to Coil, the original application, is secure and reliable.
In the picture, can you see the connection to the Coil?
View detail
When replacing the code for the Uotani Coil.
It would be helpful if you could sell these kinds of ShortParts. View detail
It's good that Cable doesn't get thicker.
I used it on my 1960's Honda Benly 50 No. C92.
I would like to exchange the whole Ignition coil, but unfortunately OEM Parts does not come out, and I do not understand the Aftermarket parts which fit. In addition, because of the integral type which does not separate Ignition coil and Plug cord, I decided to exchange only Plug cord.
1Plug×Quantity as it has 2 cylinders:2pc. I used the Set.
The Cable joint is also sold by NGK, but the outside diameter of the joint itself is too thick and a little difficult to use! (I think I can Joint that well). 。
The C92 is a 2-cylinder engine, but it has a 360 degree crank, so the Ignition coil is 1pc.
Plug cord also Quantity in the same direction:Since it is 2pc out, NGK's Joint will interfere with it.
I was worried so I went with the CFPosh plug cord joint.
If you use this joint, the outer diameter is only for the Heat Shrink Tube which is covered at the end.
Conversely, NGK's Power cable may have a different outer diameter.
In my case, fortunately, the original Plug cord was thin & the Vintage Style Plug Cord of Guts Chrome that I installed was also thin, so it was just the same outer diameter.
At the time of purchase, I was not aware of this part at all, but future buyers may want to be aware of it.
View detail
All this stuff.
I bought it because it was broken when I forcefully put in a silicon cord of a different thickness of another company's product.
I know I deserve it, but I can't believe they're even selling this stuff at Rose…
Lovely. Awww.
View detail
lucky
I bought this because I put a Watani on my NSR250, but when I relocated the mounting location, I couldn't reach the cord! View detail
Good!
I changed to an external plug cord and I bought this one too
I'm not sure how durable it is, but it's not something that degrades that much, so I think it's a good idea to buy it once
View detail
PMC Ign lead markers
Markers fitted easily even to the larger 7mm silicone leads on my Kawasaki. They give the original look and they are still holding on well. View detail
Since it has Aftermarket parts, it was useful for reprocessing etc..
Although there was a change in the length of the High-tension cord because of the change in the car type, there was sale of only the terminal part so it was hard to process the old terminal with a new terminal without having to remove it by struggling. View detail
Connection, spark plug wires NGK
The NGK spark plug cable is a good plastic joint. Can connect the cutting of spark plug wires very well. NGK spark plug connector is a good plastic joint. Can be connected to the spark plug as well. (translated by Google Translator) View detail
Invisible Fashion
I only know it when I remove the Tank.
In the first place Plug cord itself is the Length that Length will reach to each position, so it will not be mistaken.
It's for self-satisfaction by looking at Maintenance
View detail