Reviews
Purchased due to Plug cord change
I bought a battered 900SS (900SL) and am Restore.
I have been using AS Uotani's SP2Full powerKit for over 20 years and have been using it all this time on my bimota db2 (DUCATI 900SSEngine equipped car).
We transplanted the engine to the 900SS that we are restoring, and since we are taking this opportunity … we also replaced the plug cord.
The old plug cord had the connector that came with the kit crimped onto it, but since it is not possible to reuse it when replacing the plug cord, we purchased the connector that is available as a for repair kit.
The Coil used in the for DUCATI kit is a 1P independent type, the same as that used for the 4stSingle engine.
The connectors seem to be the same as those used in DYNA and other coils, but I didn't want to use a different size, so I decided to use the AS-Uotani OEM Product, although it is a bit more expensive.
The same shape is available from several manufacturers, but the lowest price is probably the one made by Posh (quantity).:(1 Set of 2pcs. around 500 yen), but AS Uotani's products are available in Quantities:2pc. It is a high-end product that costs more than 1,200 yen for a set.
It looks like the same thing no matter how you look at it … well, just in case.
As a Connector, it is very ordinary, so there is nothing special to say about it.
It takes a little bit of hang to Crimp, but you'll just have to Crimp hard on your own....
View detail
PowerCoil relocation
Purchased to replace Cable due to PowerCoil relocation.
Not possible or not possible for Repair Parts.
View detail
Used when replacing Plug cord
It is used in GPZ900R.
We have installed AS Uotani's Full powerKIT and used it to replace the Plug cord.
This time, the plug cord is NGK's power cable, which is specially designed for each model of car. It was quite difficult to stick the cord into the RubberBoots. 556 was not enough, so I sprayed CCIMetal rubber and the Plug cord went through the Rubber cover.
One thing to note is that it is not possible to crimp the terminals neatly when crimping.
From the beginning To some extent." It is important to keep it bent and crush it firmly at the end.
It is a must-have component when using the Uotani Coil.
I think it is a little expensive, perhaps because it is a monopoly. It would be helpful if the price were lower.
View detail
I didn't realize you could also buy ShortParts.
Items is essential when using Mr. Wotani and changing the code!
We are proud to be a domestic manufacturer that sells such short parts.
View detail
AS Uotani Plug cordco NECTO
Purchased with AS Uotani Coil cord extension View detail
Stock as a backup
Even if you need to make a quick trouble, you can rest assured that there is a dedicated product for you. That's why I'm using Stock. View detail
Pretty solid RubberBoots.
RubberBoots are 2.5mm thick and thicker. When fitted to the Uotani SP2 Coil, the outer diameter of the mounting portion of the Coil should be between Φ18~Φ20 (Taper) Boots inner diameter is Φ14 to Φ15 for (Taper) It was a little bit difficult to insert the Boots because it was so small. The inner diameter of the Cable is also small at Φ6 and the mating length is a whopping 25mm. The Bracket Caulking Tool is available in two types:IWISS and a vise type, although I am not sure where to find them. It is written for 8.5mm, but it seems to be usable for 7mm as well. View detail
For installation on Vf1100s
Exclusive parts for Asuotani, for installation on Vf1100s. View detail
A must for Uotani Coil
This Connector is required to plug the Plug cord into the Uotani Coil.
Installation is no problem if the instruction manual is followed, but it was difficult to insert the 8mm thick plug cord.
We recommend using a standard 7mm thick plug cord.
View detail
For replacement of plug cord.
I replaced the plug cord because I felt the ignition was getting weak after 3 years of use. It is now stronger and more robust.:1 Set of 2pcs. so I guess it will be another 3 years before I get another 1pc. View detail
Cable Replacement
The cable is sold as a single item, so it is replaced with a new one together with the cable. View detail
When replacing the code for the Uotani Coil.
It would be helpful if you could sell these kinds of ShortParts. View detail
All this stuff.
I bought it because it was broken when I forcefully put in a silicon cord of a different thickness of another company's product.
I know I deserve it, but I can't believe they're even selling this stuff at Rose…
Lovely. Awww.
View detail
lucky
I bought this because I put a Watani on my NSR250, but when I relocated the mounting location, I couldn't reach the cord! View detail
Since it has Aftermarket parts, it was useful for reprocessing etc..
Although there was a change in the length of the High-tension cord because of the change in the car type, there was sale of only the terminal part so it was hard to process the old terminal with a new terminal without having to remove it by struggling. View detail
For for Repair to Body
Watani Coil is on hand and it is purchased to connect with Taylor plug cord to the SOLO issue of my car.
The diameter of WaterproofBoots is fairly difficult with Tight.
Silicon spray attachment was completed.
View detail
Once for for Repair
Perhaps there is nothing to use, but if you must replace the Cable - - -
It is convenient to have it.
This time it is purchased at the same time, so I am not using it, but the impression using the same attached item, "Think carefully and make it" is.
For Repair's Stock.
View detail
As for Repair
I purchased it as for Repair.
Installation is the same as Included Parts for Body
In the past, since it was missing just by inserting it, I narrowed it down in two places with Tie Wrap
View detail